Categories

Best Automotive Lubricants

ARCAN PROFESSIONAL TOOLS Suction Gun Transparent Body and Ribbed Nozzle 16 OZ Chamber Capacity ASTSG

  • APPLICATION: Used for injecting and removing transmission oil, gear oil, and other automotive fluids..
  • RIBBED NOZZLE: Creates a tight seal from the hose to the gun for maximum suction..
  • TRANSPARENT BODY: Increased visibility of fluids during transfer..
  • SOLVENT RESISTANT: Can be used with any non-corrosive lubricants..
  • CHAMBER CAPACITY: Can hold up to 16 oz. of automotive fluid..
Check Stock

Red Line 57905 75W90 GL-5 Gear Oil - 1 Gallon

  • Mobil 1 Synthetic Gear Lube Ls 75W-90 Mobil 1 Synthetic Gear Lube Ls 75W-90 Is A Supreme Performance, Synthetic, Multi-Purpose, Sae 75W-90 Automotive Gear Lubricant Designed To Meet The Highest Level Of Performance Requirements Of Modern Passenger Vehicles In All Types Of Operating Conditions, Including Limited Slip Applications, As Well As Delivering Outstanding Power Transfer Performance.
  • Compared To Conventional Hypoid Gear Lubricants, Mobil 1 Synthetic Gear Lube Ls 75W-90 Performs Exceptionally Well Over A Wide Range Of Temperatures.
  • Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories.
Check Stock

Amarine Made 12v Oil Extractor Pump Turbo Pump Oil Scavenge Pump Impellor Gear Pump-Self Priming Reversible for Water Diesel Lubricants Machinery Fuel Scavenge Oil Transfer

  • Self-priming gear electric pumps suitable for lubricants and viscous liquids.Weighs in at 5lbs. 81/2oz. It is 61/2" long and 3" in diameter. The steel mounting bracket is 47/8" X 31/8" with rubber feet..
  • Rugged bronze body and stainless steel shaft, Easy connecting system, Soft rubber mounts.
  • Can be used to transfer diesel, lubricants, & machinery fuel (except gasoline petroleum fuel), Includes 2 x 12mm brass hose tails.
  • Professional grade pump - Ideal for marine, caravans/RV, automotive and agriculture applications.
  • Designed for intermittent use only. Duty cycle: 30 mins.
Check Stock

Super Lube 21010 Grease

  • The Package Height Of The Product Is 2 Inches.
  • The Package Length Of The Product Is 9 Inches.
  • The Package Width Of The Package Is 4 Inches.
Check Stock

BOESHIELD T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 12 oz.

  • Boeshield Is Great For Use In Marine, Bicycles, Automotive, Tools, Rv'S, And Aviation.
  • Loosens Rusty And Corroded Parts And Is Safe On Paints, Any Metal Surfaces, Plastics, And Vinyl.
  • Flushes Out Dirt And Old Lubricants, Displaces Moisture, And Penetrates Moving Parts.
  • Dries To A Thin, Waxy Film That Clings To Metal For Months.
Check Stock

EAI Oil Seal Compatible for Honda OEM# 91203-KCY-671

  • !!SAME BUSINESS DAY SHIPPING!! SUPERIOR QUALITY and DURABILITY: EAI Automotive Oil Seals are engineered with sturdy Carbon Steel Spring and high strength Nitrile Rubber for reliable and long-lasting performance. The rubber cover seal is lightweight and not easy to age..
  • SEAL OFF LEAKAGE and DIRT: No more getting stressed up by spills from your rotary elements! Crafted with Nitrile Rubber, Garter Spring and Carbon Steel Case, this oil seal effectively prevents the leakage of lubricants and prevents the entry of dust and dirt into your precious machine..
  • OEM# : 91203KCY671. The perfect Automotive Oil seal for your HONDA Vehicle.
  • HIGH-TEMPERATURE RESISTANCE: With its 70A Nitrile Butadiene Rubber cover material design, this spring loaded metric rotary shaft will withstand temperatures from -40℉ to 226℉.
  • HYDROCARBON FLUIDS: Engineered for the hydrocarbon fluids sealing environment, this oil seal boosts a good resistance to grease, mineral oil, hydraulic fluids, and petroleum oil. What more, this seal has low swelling in water, ensuring long term use..
Check Stock

Polaris Fuel Rail Damper Assembly, Genuine OEM Part 2521101, Qty 1

  • ID: 5/16". OD: 0.465inch.Length: 10 feet. Please measure before purchase! (Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

Boeshield T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 12 oz. (5)

  • Boeshield is great for use in Marine, Bicycles, Automotive, Tools and Aviation.
  • Boeshield loosens rusty and corroded parts and is safe on paints, any metal surfaces, plastics, and vinyl.
  • T-9 flushes out dirt and old lubricants, displaces moisture, and penetrates moving parts.
  • Boeshield dries to a thin, waxy film that clings to metal for months.
  • Boeshield was developed by The Boeing Company for lubrication and protection of aircraft components.
Check Stock

BOESHIELD T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 1 Gallon Jug

  • Boeshield T-9 is great for use in marine, bicycles, automotive, tools, RV's, and aviation.
  • Loosens rusty and corroded parts and is safe on paints, any metal surfaces, plastics, and vinyl.
  • Flushes out dirt and old lubricants, displaces moisture, and penetrates moving parts.
  • Dries to a thin, waxy film that clings to metal for months.
  • Developed by the Boeing company for lubrication and protection of aircraft components.
  • Call or email us with any questions or concerns.
Check Stock

EAI Balance Shaft Oil Seal Compatible for Mitsubishi OEM# MD009038 | MD050605 | MD069948 | NJ255

  • !!SAME BUSINESS DAY SHIPPING!! SUPERIOR QUALITY and DURABILITY: EAI Automotive Oil Seals are engineered with sturdy Carbon Steel Spring and high strength Nitrile Rubber for reliable and long-lasting performance. The rubber cover seal is lightweight and not easy to age..
  • SEAL OFF LEAKAGE and DIRT: No more getting stressed up by spills from your rotary elements! Crafted with Nitrile Rubber, Garter Spring and Carbon Steel Case, this oil seal effectively prevents the leakage of lubricants and prevents the entry of dust and dirt into your precious machine..
  • OEM# : MD009038 | MD050605 | MD069948 | NJ255. The perfect Automotive Oil seal for your MITSUBISHI Vehicle.
  • HIGH-TEMPERATURE RESISTANCE: With its 70A Nitrile Butadiene Rubber cover material design, this spring loaded metric rotary shaft will withstand temperatures from -40℉ to 226℉.
  • HYDROCARBON FLUIDS: Engineered for the hydrocarbon fluids sealing environment, this oil seal boosts a good resistance to grease, mineral oil, hydraulic fluids, and petroleum oil. What more, this seal has low swelling in water, ensuring long term use..
Check Stock

GM 4L60E 4L65E LS1 LS2 LS3 LS6 2800-3200 STALL SPEED TORQUE CONVERTER

  • Long Lasting, Superior Lubrication That Resists Water And Salt Spray.
  • Drives Out Moisture That Can Cause Electrical Failures And Hard Starting.
  • Penetrates Deep Through Rust And Corrosion To Loosen Frozen Parts, Starts Wet Engines.
  • Included Components: Automotive Electrical Lubricants.
Check Stock

BOESHIELD T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 1 oz liquid

  • Boeshield is great for use in Marine, Bicycles, Automotive, Tools, RV's, and Aviation.
  • Loosens rusty and corroded parts and is safe on paints, any metal surfaces, plastics, and vinyl.
  • Flushes out dirt and old lubricants, displaces moisture, penetrates moving parts, and dries to a thin, waxy film that clings to metal for months.
  • Developed by The Boeing Company for lubrication and protection of aircraft components.
  • 100% satisfaction guarantee - just call or email us with any questions or concerns.
Check Stock

Polaris OEM Fuel Tank 1/4\ Fuel Line 1995-1998 Magnum 425 2X4 4X4 6X6 5411296

  • ID: 13/32". OD: 0.543inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi..
  • Applicable Medium: all automotive fuels, lubricants, and coolants..
  • PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock