Best Automotive Relay Board
Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
- This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
- Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
- These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
- Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
- And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
- Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check StockAoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
- This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
- Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
- These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
- Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
- And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
- Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check StockWeewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board
- Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
- Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
- The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
- Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
- All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
- High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
- Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check StockAITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board
- 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
- DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
- 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
- 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
- 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
- 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check StockDaierTek 12V Fuse and Relay Box 6 Slots Relay Block 6 Slots ATC/ATO Fuse and Relay Block with Relay Universal Waterproof Fuse and Relay Box Kit for Automotive Car Truck Marine Boat
- Large Capacity Relay Holder – This relay box is 6 slots relay panel design, which includes 5 slots for 5 pin Bosch style relays, 1 slot for RTT7121 4 pin relay..
- ATC/ATO Fuse Relay Box – This fuse block with relay is also 6 slots relay holder design for ATC/ATO fuses, which makes the fuse relay become safer when use..
- Suitable Terminals – This 12v relay box will also come with terminals for relays and fuses, which will enables you to install and use the fuse and relay box at once..
- Top & Bottom Cover – This relay box 12v automotive will come with a top cover and a bottom cover, which makes the relay fuse box become a waterproof relay box..
- What you get – 1 x Fuse Relay Block with Top and Bottom Cover, 5 x Bosch Style 5 Pin Relay, 1 x RTT7121 4 pin relay, 16 x Blade Fuses(4 x 10A, 4 x 20A, 4 x 25A, 4 x 30A), 41 x Metallic Terminals, 1 Year Warranty. Feel free to contact us if confused..
Check StockElectronic Specialties 190 Relay Buddy Automotive Relay Tester
- Quick off-the-car relay tester - checks relay coil and switch contacts.
- Automatic test with good/bad indication - fails bad relays.
- Settable to 4 and 5 pin relay - tests the 3 most popular automotive relays.
- Switch contact are loaded to detect excessive resistance.
- Uses vehicle's 12 Volt battery for power.
Check Stock5v Relay Board Relay Module 1 Channel Opto-Isolated High or Low Level Trigger
- 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
- 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
- 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
- 【Wide Application】- These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
- 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check StockHELLA 007903001 24V 10/20A SPDT Relay , Black
- 24 Volt 10/20A SPDT relay for automotive use.
- The relay can be operated by a dashboard switch or another 24 Volt input.
- The SPDT change over relay switches electrical load from one use to another.
- Change over relays are used for switching 2-state applications such as heated rear windows, fan motors, or the movement of a sliding sunroof.
Check StockYoungneer 5v Relay Board Raspberry Arduino Relay Module 1 Channel Opto-Isolated High or Low Level Trigger
- 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
- 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
- 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
- 【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
- 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stockuxcell 5pcs DC 12V 80A SPST Auto Car 4 Pin Relay Plug with 4 Wire Harness Socket Waterproof
- DC 12V 80A 4 pin SPST electrical relay with pre-wired relay socket harness..
- High 80A coil capacity- able to handle those high current applications with ease..
- This relay has a universal application and can be used in automotive setups,car sound systems,security systems,and various other applications..
- Package includes: 5 relays + 5 socket wires..
Check StockHELLA 007793031 with Coil Suppression Power Relay 4 Pin, Mini ISO
- HELLA electric / electronic solutions provide crucial help in making driving safer, more efficient and more comfortable. HELLA also supports the trend of electric driving with an extensive product portfolio for all development stages of electrification..
- HELLA relays are meant to do their job reliably for a long time because perfection and durability is one of our strengths right down to the smallest detail. HELLA offers reliable products and one of the widest ranges in the industry..
- Automotive standard 12 volt, 4 pin Mini ISO Power relay for typical installation in vehicle relay / fuse boxes..
- The relay is able to switch and carry 50 amps at elevated ambient temperatures or up to 70 amps at less severe conditions (ie. Low ambient temperatures or short ON durations)..
- Relay includes resistor coil suppression which makes this relay an ideal OE replacement option..
Check Stock2 Pack AC Relay OEM 90080-87026 90987-02027 90987-02028
- OEM PART: Your original HVAC compressor may only work on one speed, blow hot air, or worse, not blow at all. If your air conditioning unit has any of....
- SUPERIOR PERFORMANCE: Working AC may not seem like a big deal to have. But when it hits the dead hot of summer and rolling down the window just....
- WHAT YOU GET: 2 A/C Compressor Relay Replaces OEM part numbers: 90987-02028 90080-87026 90987-02022. 100% satisfaction in every replacement relay.....
- These relays are commonly used for A/C compressors, starters, headlights, horns, fans, fog light relay and other accessories..
- 100% SATISFACTION GUARANTEE: Every Automotive relay is covered with a 12-month replacement warranty and a 30-day money back guarantee!.
Check StockELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
- Equiped with high-current relay, AC250V 10A.
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.
Check Stock