Categories

Best Aviation Sheet Metal Tools

WORKPRO 10' Aviation Snips, Straight Cut Tin Snips, Metal Cutting Shears with Safety Latch and Hanging Hole, Cr-V Steel Sharp Teeth & Non-slip Handle

  • 【Quick Cutting】The WORKPRO metal cutters snip is made of CRV, the aviation snip set is characterized by durable construction and sharp teeth, which ensures quick and easy cutting..
  • 【Energy-saving Operation】 There are two leverage pivots for aviation snip, which is helpful for energy-saving operation and easy cutting..
  • 【Safety Guarantee】 To avoid accidental injury, the safety latch can keep jaws securely closed and the self-locking nuts ensure firm connection and prevent falling off..
  • 【Ergonomic Handle】 Using TPR material for long-term operation and comfortable hand feelings, the handle also has a hanging hole which is convenient for storage and easy to carry..
  • 【Wide Application】 With a cutting thickness range up to 1.2mm cold-rolled steel sheet, you can use these metal snips to cut metal wire, thin PVC pipes, keel, square steel pipes, etc..
Check Stock

Hurricane 10 Inch Cr-Mo Blade High Leverage Aviation Tin Snips, Straight Cut, Heavy Duty Metal Cutter for Cutting Metal Sheet, Up to 40% Labor Saving

  • 【Professional Labor-saving Design】 Patented labor-saving design to save more than 40% cutting force for significantly less fatigue. Each aviation snip has two leverage pivots for energy-saving operation and easy cutting..
  • 【Straight Regular Cut】 10 Inch Cr-Mo Blade High Leverage Aviation Tin Snips, Cuts straight and wide curves to the left and right, ensure a secure hold and precise cuts..
  • 【Longest Lasting Edge】 Drop-forged and heat-treated chrome molybdenum steel blade for maximum strength and durability..
  • 【Cut Capacity of Tin Snip】 With a cutting thickness range up to 18 gauge (1.2mm) cold-rolled steel sheet, 18 gauge (1.2mm) Galvanized sheet, and 22 gauge (0.7mm) stainless steel..
  • 【Safety and High Efficiency】Bi-material grips for for comfort and control. Locking latch prevents damage to cutting edge when stored. Spring-assisted latch on metal snips for fast one-handed operation..
Check Stock

Hurricane Sheet Metal Hand Seamer, 6 Inch Straight Jaw Sheet Metal Bender Tools for Flattening Metal,Double Dipped Cushion Handle

  • 【Manual Hand Seamers Sheet Metal Tools】 Use as a sheet metal duct bender for HVAC projects..
  • 【Precision Seamer】 Casting jaws are marked in 1/4 inch bending increments..
  • 【Comfortable and Safe Design】 Non-Slip Pitted handle for maximum power and comfortable operating range. Safety lock and hanging hole for easy carrying and storage..
  • 【Build to Last】 Heavy duty all steel construction with nickel plated finish for durability..
  • 【Ideal for Construction Projects】 Jaw folds 18-gauge Galvanized sheet, 30-gauge Cold-rolled steel sheet and 30-gauge stainless steel. Ideal for bending, stitching, and flattening sheet metal. Non-ferrous metals without the need for heavy-duty power tools..
Check Stock

2023 New Sheet Metal Cutter Drill Attachment,Electric Drill Plate Cutter DIY Metal Drill Attachment, Sheet Metal Knife for Cutting Iron, White Sheet, Steel,Copper, Aluminum

  • ✅【SHARP & DURTABLE】:This metal nibbler drill attachment has a faster cutting speed than other sheet metal cutting tools, suitable for any drill bit working between 1500-3000, easier and more powerful than ordinary scissors and knives, it can save a lot of work time, Improve efficiency..
  • ✅【PRECISE CUTTING】:With a high hardness cutting head, this nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm)..
  • ✅【WIDE APPLICATION】：The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. It can not cut sheet metal with blending, ribbed, special-shaped or welded shape or non-metallic material. It can not be cut forward if it gets stuck, set the drill to reverse for automatic exit..
  • ✅【PACKAGE CONTENT】：The tool box contains an electric drill plate cutter (electric drill is not included), a manual, an Allen wrench, two wrenches of different sizes, a connecting rod, a spring for fixing, a plastic handle and its buffer rubber ring. All the tools you need are here....
Check Stock

P1 Tools Sheet Metal Clamp Locking Pliers 10 Inch-High Carbon Steel Duckbill Pliers

  • 【INNOVATIVE DESIGN】The adjustable screw on the handle of sheet metal pliers provides ideal clamping pressure, making your work easier, and the rubber handle is more comfortable to use and can provide greater grip.
  • 【EASY TO OPERATE】The pull-type release lever acts like a trigger, which can control one-handed operation of duckbill pliers and quickly reposition them.
  • 【MATERIAL】The vice grips are made of high-carbon steel, electroplated and sandblasted to prevent rust, strong and durable, and can be used for a long time.
  • 【SHAPE】Wide and flat jaws of locking pliers squeeze the sheet metal parts together, which is very suitable for bending, forming and crimping sheet metal parts.
  • 【QUALITY ASSURANCE】 P1 Tools is responsible for the quality of the sheet metal pliers sold. Quality problems, return refunds, and excellent customer service make it easy for you to shop. Come and experience it, more tools are waiting for you to take away.
Check Stock

Aviation Snips TOOLMAK 10-inch Straight Cut,Chrome Vanadium Steel,Comfortable Grip,Suitable For Electrician Maintenance, Aluminum Cutting, Metal Cutter Tools

  • SIZE：10" Aviation Snip(Straight Curved),Bi-color Handle,Black with orange handle with rubberized grip for comfort and control..
  • MATERIAL：Made of premium chrome vanadium steel processed with a high-frequency heat treatment,After heat treatment hardness up to 62HRC,High Hardness, serrated edge non-slip,extraordinary hardness, superior toughness with high quality..
  • SAFETY：Locking latch prevents damage to cutting edge when stored, Cuts up to 1/16"(1.8mm) cold-rolled steel sheet.latch locks tool shut when not in use to help protect the blade..
  • WIDE APPLICATION：Blade serrations spread cutting force across jaws improving cut quality and tool life,Have labor- saving lamp spring and compound lever design,Suitable for Cold-rolled steel sheet, stainless steel plate, plastic sheet etc..
  • SATISFACTION GUARANTEED: At TOOLMAK tools we stand by the quality construction and durability of all our products. We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects..
Check Stock

Aviation Connectors 5A Lsgoodcare 30Pcs GX12-5 Pin Metal Aviation Plug Kit Including 12MM 5 Pin Plug Thread Male Female Panel Wire Socket and Aviation Plugs Cap GX12-5

  • [Aviation Connector Plug Male Female Kit]: High Quality GX12-5 Pin Metal Cable Connector, 12MM 5Din Straight Plug,Durable.
  • [Thread Aviation Plug Male 5 Pin 5A]: Metal and Hard Plastic (Shell Material: Zinc Alloy.
  • Connector Pins Material: Fine Copper Silver Plating).
  • [Aviation Wire Connector Female 5 Pin 5A]: Metal and Hard Plastic (Shell Material: Zinc Alloy.
  • [Multifunction Metal Chassis Connector Socket 300V ]: The aviation connector is used widely in signal and electronic connector of aviation, space....
  • [Come with Rubber Aviation Plug Caps + 30 Days Unconditional Refund, 90 Days Replacement Guarantee]: E-mail Us Directly If You Need Replace Or Have....
Check Stock

Malco M2006 10-3/4 in. Left Offset Snips

  • Nothing out cuts, outmaneuvers or outlasts MAX2000 Aviation Snips.
  • Cuts sharp left angles, straight lines and 5" (125 mm) diameter circles.
  • Alloy steel blades with serrated lower jaws for solid gripping power in sheet metals.
  • Offset handles for easy access when cutting in tight spaces.
  • All-new, ambidextrous, one-hand-operation metal latch is accessible from the top or side.
  • A narrower grip opening accommodates large or small hands.
Check Stock

Dirnatel Ts3 New Electric Drill Plate Cutter,Metal Nibbler Drill Attachment with Adapter, Variable Speed Swivel Head Electric Metal Cutter Shear

  • [Strong Cutting Ability] Dirnatel TS3 Metal cutter tool has a faster cutting speed than other sheet metal cutting tools, powerful than ordinary scissors and knives..
  • [Usable range]: Sheet metal nibbler With a high hardness cutting head,this nibbler attachment can handle iron sheet(0.1-1mm),steel sheet(0.1-0.8mm),copper sheet(0.2-1.2mm),aluminum sheet(0.2-1.2mm)..
  • [Easy to Use]: Metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. with an adapter handle, adapt to a variety of different electric drills..
  • [Matters need attention] The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. Do not cut with angular, special shape, welding sheet metal and non-metallic materials.If it is stuck, set the drill bit to reverse to automatically exit..
  • [After-sales service] : After purchasing Dirntel brand products, we will provide you with up to 2 years of after-sales service, if you have any questions, please contact us. Thank you very much!.
Check Stock

BOESHIELD T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 12 oz.

  • Boeshield Is Great For Use In Marine, Bicycles, Automotive, Tools, Rv'S, And Aviation.
  • Loosens Rusty And Corroded Parts And Is Safe On Paints, Any Metal Surfaces, Plastics, And Vinyl.
  • Flushes Out Dirt And Old Lubricants, Displaces Moisture, And Penetrates Moving Parts.
  • Dries To A Thin, Waxy Film That Clings To Metal For Months.
Check Stock

HOZEON 2 Pack 6061 Aluminum Sheet 12 x 12 x 1/4 Inches, Sturdy and Durable Aluminum Plate, Heavy Duty Metal Aluminum Sheet for Construction, Elevator, Transportation, Electronics, Aviation

  • ...rance. In addition, aluminum sheet 12 x12 inches has the characteristics of high hardness, stable performance, and easy cutting and processing. It is the high-quality aluminum sheet you have been looking for..
  • MULTIFUNCTIONAL ALUMINUM SHEET - The aluminum sheet 1/4 inch has unlimited uses, which is very suitable for aviation, ship, automobile, construction, elevator, transportation, electronics and other industries. Don't hesitate, take it home quickly!.
  • SATISFIED SERVICE - Our integrity is supreme and we attach great importance to product quality and customer satisfaction. We offer 30 days’ money back guarantee. If you have any question with the aluminum plate 1/4, please feel free to contact us for details..
Check Stock

Cimeton 4Pcs Power Cutting Tools Set Including 1Pc 3-in-1 Heavy Duty Multi-Cutters Wire Cutter Utility Knife and 2Pcs Aviation Tin Snips with 1 Pair of Gloves for Gardening Leather Pipe Wood

  • ➤[Package Includes]: Cimeton power cutting tools set includes 1pc 3-in-1 heavy duty multi-cutters, 2pcs aviation tin snips and 1pair of gloves. Coming with a red cloth bag tool kit for easy storage and carry. The gloves included help keep your hands clean. This cutting tools kit is a practical tool to cut wire and pipe into different length..
  • ➤[Ergonomic Handle Design]: The anti-slip handle of these cutters adopts an ergonomic design to help you save effort and is suitable for long-term operations. The PVC material can also bring you a comfortable gripping experience and reduce hand fatigue during the cutting process..
  • ➤[Heavy Duty Multi-Cutters]: The blade of multi-cutter tool is made of high quality stainless steel, features high hardness, durable and sharp with clear scale for some simple measurements. Our multifunctional scissors has a design of safety lock, which can switch up and down to close the scissors for safe storage and saving space. It also has a built-in utility knife, which can retracts the anvil and stick the blade out as a box cutter..
  • ➤[Aviation Tin Snips]: The tin snips’ blade is made of stainless steel with boast serrated edges, which make it cut more easily and quickly. The compound leverage design multiplies handle force....
Check Stock

Hurricane 10 Inch Aviation Tin Snips Straight Cut Heavy Duty Metal Cutter for Cutting Sheet Metal Chrome Vanadium Steel

  • 【Straight Regular Cut】Hurricane 10 Inch Aviation Tin Snips, Cuts straight and wide curves to the left and right, ensure a secure hold and precise....
  • 【Longest Lasting Edge】Chrome Vanadium Steel, Serrated edge blades with sanding finish for maximum strength, durability, and long lifetime..
  • 【Cut Capacity of Tin Snip】 With a cutting thickness range up to 18 gauge (1.2mm) cold-rolled steel sheet, 18 gauge (1.2mm) Galvanized sheet, and....
  • 【Comfortable Grips】Ergonomical Tyregrip Handle with rubberized grip for comfort and control..
  • 【Safety and High Efficiency】Locking latch prevents damage to cutting edge when stored. Spring-assisted latch on metal snips for fast one-handed....
Check Stock