Categories

Best Axle Camber Plates

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

GUGUGI 10 Pack Automotive Vinyl Wrap Felt Squeegee Soft Scraper Car Wrapping Tool Kits with Micro Fiber Felt for Auto Vinyl Wrap, Window Tint, Wallpaper Installation, 5Inch

  • 5PCS SET -- You will get 16mm & 17mm Engine Mount Socket Wrench, 18mm & 21mm Rear Camber Adjusting Wrench, 24mm Oil Filter Removal Wrench, all marked with the number. 12 point, tilt angle design, used with 3/8'' drive..
  • WHY NEED IT -- 1) 16mm/17mm wrench used for removing nuts from engine fixing screw. 2) Offset 18mm/21mm wrench for adjusting rear axle camber. 3) 24mm oil filter removal wrench for models with common rail engines with DSG gearboxes, help you change oil without removing the battery..
  • 1) 16MM & 17MM Engine Fixing Screws Wrench compatible with Mercedes Benz W124 W126 W140 W170 W201 W202 W203 W204 W210 W211 W219 W220 W221 models..
Check Stock

Specialty Products Company 25480 Upper Control Arm for Toyota 4Runner and FJ - Pair

  • Provides an additional +/- 2 degree of camber and 0 degree to +4 degree of caster change.
  • Built with an OE style ball joint and bushings.
  • Hybrid tubular and forged steel design is tough enough to race - on or off-road.
  • Includes Left and Right arms - 1 per axle.
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • 【Professional Digital Caster Camber Gauge】The camber gauge is used to measure the camber and caster angles of wheels or brake discs.Camber gauge allows you to restore the strut to original camber position after disassembling and reassembling the suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the ....
Check Stock

Longacre® 52-78290 Digital Caster Camber Gauge

  • Be confident with your setup - here's an ultra accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed.
  • Protect your investment - the caster camber gauge comes with a magnetic adapter and padded hard carrying case to keep your gauge safe when not in use.
  • Make front-end caster and camber adjustments quickly, easily, and accurately - this digital caster camber gauge is also backlit for use in dark areas.
  • Adjusting camber can have a dramatic effect on the cornering of your car - optimum camber settings will result in more speed and ideal tire wear.
  • Built-to-last, the Longacre digital caster camber gauge is made of strong CNC machined billet aluminum.
Check Stock

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

Maxtrac Suspension 301360 5-6In Adj Rear Flip Kit

  • Incl. Axle Retainer/U-Bolt/Spring Plates.
Check Stock

BURTON Throwback Snowboard Sz 100cm

  • Camp Seven Roots CRC Snowboard: You asked for it and we delivered. The perennial fan favorite Roots finally has an alternate camber brother! The Roots CRC (camber-rocker-camber) is a new edition to the Roots line and allows riders to choose a board with a more loose and relaxed center of the board while loaded camber in the tip and tail put the pop right where you want it. If you think you know the Roots from years past, wait until you ride the new CRC version!.
  • Profile: Camber Rocker Camber Rocker in the center to free up your contact points for catch free riding and serious float in powder, is then paired with camber in the tip and tail for explosive pop and tons of added control..
  • System APX Bindings: features of this binding are a dream come true. Full length EVA base pad. Either-Or toe strap that can be ridden toe cap style or over the forefoot. Gel insert contoured straps. Inside routed ladder straps, Aluminum 4 tooth ratchets, 15% fiber inclusion in both the baseplate and the highback, anatomically correct footbed, comfy adjustable toe ramps, full dual sided on the fly strap adjustability via cam cleats on both toe and ankle straps..
Check Stock

Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822

  • This is a brand new Traxxas 2WD Slash chassis..
  • It includes everything seen in the pictures.
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools..
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis.
  • Pulled from a brand new Traxxas 2WD Slash..
Check Stock

LIBRA 3500lb Tandem Trailer Axle Suspension Kit Leaf Springs U-Bolt & Hanger Kit

  • 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
  • It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
  • Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

WEISHUJI Aluminum Turnbuckles and Camber Links with Rod Ends,Adjustable Aluminum Steering Linkage Servo Link Pull Rod Turnbuckle for 1/10 RC Car, Red

  • Aluminum Turnbuckles and Camber Links with Rod Ends are OEM Hop-Up Upgrade Parts for RC Car 1/10 Scale Traxxas Slash 4x4..
  • Aluminum Turnbuckles and Camber Links with Rod Ends adds strength and adjustability to your RC Car..
  • Aluminum Turnbuckles and Camber Links with Rod Ends Length is approx 79-102mm (Min-Max)..
  • Aluminum Turnbuckles and Camber Links with Rod Ends is made of Aluminum Alloy with High precision..
  • Package of Aluminum Turnbuckles and Camber Links with Rod Ends includes: 2 x Adjustable Turnbuckles Camber Linkage Rod 4 x Screws.
Check Stock

LIBRA 3500lb Single Trailer Axle Suspension Kit 1750lb Leaf Springs & Ubolt Kit

  • 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
  • It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
  • Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock