Best Axle Puller Tool
Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments
- ...emove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
- ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
- ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
- ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricating flui....
Check StockSunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints
- Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
- Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
- Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
- Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
- 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check StockVCT 23" Long 5lb Slide Hammer Inner CV Joint Puller
- The set includes a 23-inch T-style slide hammers bar, a 5 lb hammer weight, a nut, and a 2-inch opening 2.5-inch depth slide hammer CV axle adapter. They will remove the axle assembly without damage on 1986 to current Taurus and Sable..
- The slide hammer and puller design provide a straight and even pull to protect joint off damage. The round bead on the puller will stop the hammer so it can never hurt the hand pulling on T-shaped handle..
- Our CV joint puller adapter and large slide hammer bearing puller will create added torque to impose a large pressure on CV axle. This tool set could easily loosen and remove stubborn CV axles in minutes..
- The product is made of premium steel, all the parts have hardened and finished with high-temperature oxide to ensure superior durability and rust and corrosion resistance..
Check StockOrion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1\ to 2-7/8\ IDs
- 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
- AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
- SEAL PULLER SET: The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook.
- BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8.
Check StockBearing Press / Puller Longboard Skateboard Inline Quad Tool 8mm / 7mm Bearings
- Durability paired with functionality make this bearing press a can't miss tool. This tool eliminates the struggle of installing and removing bearings....
- This press can be used with virtually all skateboard wheels and most longboard (maximum size of 70mm x 45mm), inline (maximum size of 82mm x 24mm),....
- This press comes assembled with an 8mm axle for standard size 608 bearings, and comes with an extra 7mm axle for size 627 bearings.
- Works as a press/puller for 8mm bearings. For 7mm bearings, ONLY WORKS AS A PRESS. This tool cannot be used as a puller for 7mm bearings.
- Also includes hardware to table mount if you wish. does not include wheels from the example photo.
Check StockE-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer
- 【Slide Hammer Puller Set with Plastic Suitcase】: This kit include: 1 heavy duty slide hammer.
- 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry..
- 【 Perfect Joint Fork】 : This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
- 【Slide Hammer Made of Heavy Steel】The slide hammer and the CV joint fork is made of heavy-duty steel, which can withstand huge pressure without deformation, is not easy to break, and is more durable. The sliding distance is 19.5 inches, and the weight is 10 pounds .The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
- 【Quick to Remove CV Axle 】:With thi....
Check StockABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter
- [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
- The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
- [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
- [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
- Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
- Use lubricant fluid for added ease (not included).
- [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
- Pulls CV joints on 1986-current Taurus/Sable.
- [Built to Last] Hardened hammer shaft provides strength and d....
Check StockATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set
- Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
- A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
- Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
- slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
- this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
- Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check StockOEMTOOLS 25749 Wheel Hub Removal Tool, Green Hub Bearing Removal Tool, Hub Buster Tool Prevents Axle Removal or Damage, Works for 5, 6, and 8 Lug Hubs
- Clean Break: Remove your damaged or frozen hub assembly without any risk of damaging the axle with this hub assembly removal tool.
- Your Go-To Tool: The hub puller tool is designed to work with any configuration of axle-bolted hubs, including 5, 6, and 8 lug hubs.
- If the Hub Fits: Hub removal is simplified with the 2-5/8” center-to-center hole pattern of this wheel hub puller, making installation easy and speeding up the hub removal process.
- Shielded With Steel: Trust in your wheel hub remover’s longevity with its 3/4" steel backing plate and reinforced striking plate, giving it the strength to endure any wear and tear.
- A Tool For the Ages: This wheel hub remover will resist rust and corrosion thanks to its high-quality steel construction, resulting in equipment you can rely on long-term.
Check StockKeycap Puller Stainless Steel Key Keycap Removal Tool Keycaps Remover for Mechanical Keyboard for Removing Fixing Keyboard Tools
- | 2 IN 1 CREATIVE DESIGN | - The keycap puller has a plastic handle with two steel loops to catch and pull keys, it is not only a keycap puller but also a switch puller..
- | HIGH QUALITY MATERIAL | - The keycap puller is made of high quality stainless steel and plastic, the compact wire style keycap puller is a necessary tool for any mechanical keyboard owner..
- | WIDE COMPATIBILITY | - The keycap puller is compatible for most mechanical keyboards including Cherry MX, Alps, and Topre switches. Do not use on "scissor" type switches..
- | EASY TO USE | - Wires on the puller could bend outward to fit onto keycaps. Design and realization of the dual-purpose key pull and axle pull. It is very convenient for removing keycap..
- | GREAT KEYCAP REMOVER | - The keycaps and mechanical shafts can be removed more quickly and safely, the keycap puller is a necessary tools for cleaning and repairing mechanical keyboards..
Check StockKIE Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler
- The axle & front wheel hub puller makes for easy brake and bearing maintenance..
- The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
- Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
- The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
- Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
- Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that resists rust and corrosion..
Check StockFront Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler
- The axle & front wheel hub puller makes for easy brake and bearing maintenance..
- The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
- Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
- The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
- Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
- Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion..
Check StockOTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case
- OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
- Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
- Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
- 34698 - 3ea. Pulling Jaws for internal/external use.
- 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
- 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
- 05378 - Grip Wrench Adapter w/single lead (wrench not included).
- 205377 - Dent Puller, 309321 - Forcing Screw.
- durable blow-molded case keeps set components contained and organized.
Check Stock