Categories

Best Axle Ratio For Towing

Eaton 912A585 Detroit Truetrac 27 Spline Differential for Dana 30

  • Ring Gear Size: 7.2 IN, Ring Gear Ratio: 3.73 & up.
  • Catalog Notes: Applies to non-disconnect only.
Check Stock

CURT 16055 Bent Plate 5th Wheel to Gooseneck Adapter Hitch, Fits Industry-Standard Rails, 25,000 lbs, 2-5/16-Inch Ball

  • MAXIMUM FUNCTIONALITY. This unique gooseneck hitch is a 5th wheel to gooseneck adapter. It is designed to drop into existing 5th wheel base rails in your truck bed and enable gooseneck towing.
  • 5TH WHEEL FIT. For versatile application, this gooseneck 5th wheel hitch fits any industry-standard 5th wheel rails. It provides a standard 2-5/16-inch gooseneck ball for ready coupling of a gooseneck trailer.
  • DEPENDABLE TOWING. This 5th wheel gooseneck hitch is tested and rated to tow 25,000 lbs. gross trailer weight and 6,250 lbs. vertical load (limited to lowest-rated towing component).
  • CORROSION-RESISTANT. For reliable weather resistance, this gooseneck hitch adapter is shielded in a highly durable carbide powder coat finish. This tough finish easily outlasts exposure to rain, snow, dirt and other corrosive elements.
  • EASY TO INSTALL. This 5th wheel to gooseneck hitch adapter easily drops into the 5th wheel hitch rails and is secured with 4 included hitch pins. It can be positioned over the truck axle or flipped and set for 3 inches of rearward displacement.
Check Stock

GG Grand General 20029 Stainless Steel Standard Rear Hub Cap

  • High quality stainless steel rear hub cap for newer trucks, towing, trailers, RVs, buses and others.
  • Fits 8-1/2" diameter axle with 8 of 3/4 inches studs.
  • 8" inside diameter with 3" overall height.
  • Designed for newer trucks axles with long studs.
  • Simple snap onto the hub for easy installation.
Check Stock

Axial AX31438 AR44 High-Pinion Front Axle or Rear Locked Axle Complete Parts Set (53-Pieces) - Fits SCX10 II: AXIC1438 , Black

  • Complete parts set lets you build either a complete front axle or a complete rear axle.
  • High pinion design provides added ground clearance and better drivershaft angles.
  • Small pumpkin for increased clearance and a scale look, while optimized 3.75 gear ratio reduces torque twist.
  • Single piece axle housing for added strength, 1-piece all-metal locker, and bolt on link mounts.
  • Allows up to 45 degrees of steering and provides smooth action for a higher performing, more efficient drivetrain.
Check Stock

INJORA RC Axle Metal Front and Rear Portal Axle with Protector for 1:10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047(Silver)

  • The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle..
  • Diamond-shaped pumpkin for increased clearance a more realistic, scale look..
  • Optimized gear ratio – 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs..
  • Come with protect armor, servo arm, 12mm wheel hex, nuts and screws, easy to install..
  • Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 1/10 RC Crawler Car Axial SCX10 II 90046..
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • ...our-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a 360-degree steering function that allows you to reverse the boat without shifting gears..
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • ...e it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a 360-degree steering function that allows you to reverse the boat without shifting gears..
Check Stock

INJORA RC Axle Metal Front and Rear Portal Axle with Protector for 1:10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047 Upgrade Parts(Black)

  • The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle..
  • Diamond-shaped pumpkin for increased clearance a more realistic, scale look..
  • Optimized gear ratio – 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs..
  • Come with protect armor, servo arm, 12mm wheel hex, nuts and screws, easy to install..
  • Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 1/10 RC Crawler Car Axial SCX10 II 90046..
Check Stock

ENIXWILL Fifth Wheel Gooseneck Hitch Adapter Plate for Pickup Truck Bed，25,000 lbs, 2-5/16-Inch Ball

  • Maximum Functionality：This uniquely designed gooseneck hook is used to fit into the existing 5th wheelbase track in the truck bed and enable gooseneck towing..
  • Feature： 2-5/16 Inch Ball，this fifth wheel gooseneck hook has been tested and has a rated towing force of 25,000 pounds,The total weight of the trailer is 6,250 pounds..
  • High-quality materials:The surface treatment adopts plastic-sprayed black orange peel pattern, which can resist the influence of rain, snow, dirt and other corrosive elements, and the appearance is beautiful and durable..
  • Instructions：The 5th wheel gooseneck hook adapter plate can be placed on the truck axle or flipped and set to a 3 inch rearward displacement..
  • Easy Installation：This fifth wheel gooseneck hitch adapter plate can be easily installed and removed. Just drop it into the 5th wheel hitch rails and fix it with the 4 attached connecting pins..
Check Stock

CURT 51160 Assure Electric Trailer Brake Controller with Dynamic Screen and Full Text Readout, Proportional, Black

  • LED indicator to continuously check the electrical circuit to ensure it is in sync and active.
  • In-dash mounting for a less-intrusive appearance.
  • Compatible with 1-, 2- or 3-axle trailers.
  • Boost option to allow additional braking power when towing heavier loads.
Check Stock

Tips On Finding Perfect Wood Chipper And Shredder

  • Commercial gas-powered chipper with extended axles and trailer tow hitch.
  • Built-in steel toolbox with safety glasses, ear protection, work gloves, oil....
  • Extra-large reinforced feed hopper with dual equipment moving handles.
  • 180° schedule 80 tool-free rotational spout....
  • Dual belt drive drum transmission 13-inch dual-edge reversible cutting blades.
  • Auto-adjust cutters for brush up to 6.25....
  • DOT approved for legal road towing: Extended 36 in. axle with code 8x3.37 DOT-T2018 4.80-8 QD-712-11 DOT 58C1 tires.
Check Stock

DDCSV3.1 3 Axis Offline CNC Motion Controller Handwheel G Code PLC Control System Electronic Handwheel with Emergency Stop Function

  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version. ARM9 main control chip,FPGA core algorithm chip. 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • 3 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle. Analog spindle control 0-10V spindle control (can be modified as PWM output). Jog function for each axle (continuous, step, defined distance). 24VDC power input, minimum Current is 0.5A..
  • 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. USB flash disk support for G code file input,no size limited of the G-code file. 1GB internal memory and support standard MPG..
  • Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • Drive output type, strong anti-interference ability, long-distance transmission. Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..
Check Stock

TYT 3500lbs Boat Trailer Winch - Black (3500lb Cable Winch - Black)

  • ❆【Capacity】The Heavy duty steel construction hand winch has pulling force for 3500 lbs / 1600 kg, Steel Cable Length: 10m*(32ft) ø 6.0mm, Mounting base size: 7.55x3.93in, Winch Color: black.
  • ❆【Special Surface & Gear】High quality Zinc-Plated black plating finish boat trailer winch for maximum strength and longevity that resists rust and corrosion. Hardened steel gears, first speed ratio 4:1, second speed ratio 8:1, high-efficiency transmission ratio4:1/8:1. High carbon steel gears to resist wear and last longer..
  • ❆【Handle Performance】 25cm/9.84in, the curved handle of TYT Winches makes it easier to turn, to move something 3500 lbs or less, anti-slip handle ensures a tight grip for less user fatigue and more productivity while cranking the manual winch..
  • ❆【Two Way Ratchet】Mooring hook equipped with a safety pawl, which can ratchet forward and backward. The ratchet winch can be used to lift objects, drag boats, or volleyball net, Ideal for towing or loading boats, personal watercraft, and lawn equipment..
  • ❆【Package & Note】Standard mounting hole, small portable size, easy to install. The inner box package pass the 1-Meter rejection test, protect the product from damage..
Check Stock