Wheel Kit, 6" Black Blow-Molded Hollow Plastic Wheels & Axle Caps for 3/8" Axle Shaft - Includes 2 Wheels & 2 Axle Caps (696561)
- For battery chargers with 3/8" axle shaft. Also used on barbecue grills and other light equipment, check dimensions for proper fit. Replaces the following battery charger wheel sets: Associated 605672, Century 413-044-666, John Deere PT1598, PT16173, PT19357..
- PLEASE NOTE THAT THESE WHEELS ARE FOR LIGHT-DUTY APPLICATIONS. DO NOT INSTALL THESE WHEELS ON 2-WHEEL EQUIPMENT THAT WEIGHS OVER 50 LBS. USE ONLY SMOOTH AXLE SHAFTS - DO NOT USE THREADED ROD. DO NOT USE SPACERS, SPRINGS OR SHIMS ON UNDERSIZE AXLES..
- Kit includes 2 wheels, 6" black hollow plastic, and two 3/8" press-on axle caps. Steel axle caps are press-fit, no special tools required..
- Load Rating: 25 lbs per wheel (50 lbs per pair).
Check StockNICHE Front Rear CV Drive Shaft Axle Set Kit for 2007-2012 Polaris Sportsman 500 800 1332881 1332935
- Front Axle Replaces OEM Part Numbers: Polaris 1332881, 1332656, 1332501, 1332471.
- Rear Axle Replaces OEM Part Numbers: Polaris 1332935, 1332654, 1332511, 1332421.
- Compatible with: 2007-2012 Polaris Sportsman 500, 2007-2012 Polaris Sportsman 800.
- Ultra Rugged 4340 Chrome-Moly Shafts and Joints, Puncture and UV Resistant Neoprene Boots, Low-Profile Boot Clamps, Resistant to Catching Debris.
- Heat-Treated Bearings an Joints, Packed with High-Performance Moly Grease, Fully Assembled Including Inner & Outer Joints on the Shaft.
Check Stock10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters
- Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
- Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
- Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
- Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check StockWINTOOLS 36mm 1/2" Drive 6 Point Axle Nut Socket
- For removal and installation of axle nut and automatic transmission tail output shafts.
Check StockRcv Dana 30 And 44 Axle Tube Seals Rebuild Kit
Check StockAll Balls Racing 85-1044 Wheel Stud and Nut Kit
- ...M IRS 2015 - 2018. Honda TRX500FM Solid Axle 2014 - 2018. Honda TRX500FPA 2012 - 2014. Honda TRX500FPE 2007 - 2013. Honda TRX500FPM 2008 - 2013. Honda TRX500TM 2005 - 2006. Honda TRX680 Rincon 2017 - 2018..
- Kit contains all of the components required to properly rebuild the swing arm bearing assembly..
- Needle bearing shafts are made with SCM415/42 bearing steel that has been hardened and precision ground..
- All metal bushings are case hardened and plated to prevent wear and corrosion..
- POM composite washer bearings replace thru needle washers increased service life and super resistance to water and dirt..
Check StockSteel Axle Front CVD Drive Shafts for 1/10 RC Axial Wraith 90018 90048 RR10
- Come assembled for easy installation, Ultra high strength cross pins.
- Increased size universal joint for maximum strength at the joint.
- Some rubbing may occur initially at the link mount screws due to larger diameter shafts..
Check StockSteel Rear Axle CVD Drive Shafts for 1/10 RC Axial Wraith 90018 90048 RR10
- Come assembled for easy installation, Ultra high strength cross pins.
- Increased size universal joint for maximum strength at the joint.
- Some rubbing may occur initially at the link mount screws due to larger diameter shafts..
Check StockBang II (Feat. Uppercase 5ive)
- Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
- Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
- The bearing adapters are included in the set.
- We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check StockZKTOOL Lower Control Arm Prying Tool,2 Pack Specialty Tools for Mechanics Lower Control Arm Tool,Suspension Specialty Bushing Tool, Designed to Work With a 7/8 in Diameter Pry Bar.
- 【8629 Wheel Hub Removal Tool】Universally applicable to all axle bolted hubs (5, 6 and 8 lug hubs). Used to safely remove the frozen hub assembly instantly without damaging the axle..
- 【6007 Lower Control Arm Prying Tool】For most front-wheel drive vehicles. suitable for the lower control arm.
- the eyelet end is suitable for any 7/8" crowbar. Used to help the installation of wheel bearings, front axles and CV joints..
- 【Brake Caliper Hooks】used on variety of automotive repair work that related to brakes, wheel bearings, axle shafts and suspension servicing. Prevent the brake caliper from obstructing operation during maintenance, reducing damage to the brake caliper, brake hose and other parts..
- 【Superior Material】Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant. Wheel Hub Removal Tool 3/4” steel backing plate and reinforced striking platefor a long-term and reliable performance..
- 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty..
Check StockRC-Hub 1Pcs RC Driveshafts Metal Drive Shaft 55-67mm for 1:14 Tamiya Trailer Tractor Truck RC Crawler Car
- Drive shafts for slash 4x4 1/10 scale Traxxas Slash Platinum/Slash Ultimate/Rustler VXL 4X4/Stampede VXL 4X4/Hoss VXL 4X4/Slash VXL 4x4 parts RC Car.rustler 4x4 drive shaft..
- Slash 4x4 axles is builtin antiseparation design reduces the failure rate, high performance, and increases the smoothness and angle of remote control car..
- Compatible with traxxas 4x4 vxl drive shaft is with more turning power and more sturdy use.High reliability, ensuring smooth transmission..
- Fits for traxxas drive shafts made of high-quality metal materials middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life..
- RC cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime..
Check StockEbike Universal Torque Arm for Electric Bicycle e-Bike Bike Front or Rear Hub Motors and Mid Drive e-Bike (T-2 for 16mm)
- This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts.
- The universal torque arm conversion kit is made of consistent quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
- Even though it's a universal design, please check the size & diameters to make sure it fits your bike..
- Consistent quality steel arm, hub mount, and C-clamp. Comes ready to be installed on either front or rear axle.
- We are committed to making riding safer,If you have any questions about this universal torque arm kit , please reply to us by email and we will help you resolve any issues as soon as possible..
Check StockLUOHAIMEI Oil Bearing 5x2B 5x2.5B 6x2.5B 6x3B (10Pcs) Brass Shaft Sleeve Axle Bushing Bearings for RC 4WD Models Ball-Bearing (Size : 52B 2.05x5x2.4mm)
- Model Number: 52B 52.5B 62.5B 63B RC Accessories.
- Torque Capacity: 2.05*5*2.4mm 2.55*5*2.4mm 2.55*6*2.4mm 3.05*6*2.4mm.
- Brass sleeve, also can be said to be a simple bearing accessories technology model parts brass work piece. Used for fixing axles or shafts. It can reduce the friction between axle and axle frame, improve transmission efficiency, and make your handmade works more precise..
Check Stock