Best B45ac Relay

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

• This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
• Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
• These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
• Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
• And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
• Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

• This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
• Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
• These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
• Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
• And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
• Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..

Multiple Use Relay 90987-02027 A/C Compressor Cooling Fan Relay for Toyota OEM 90080-87026, 90987-02028 Denso 156700-2870, 156700-2840 AC Relays 4-Pin Blue

• OEM PART: Your original HVAC compressor may only work on one speed, blow hot air, or worse, not blow at all. If your air conditioning unit has any of these symptoms, it may be time to replace your AC relay..
• SUPERIOR PERFORMANCE: Working AC may not seem like a big deal to have. But when it hits the dead hot of summer and rolling down the window just won¡¯t do, feeling that cool breeze on your face would seem like heaven. Fix that AC relay and say goodbye to sweating in your car..
• WHAT YOU GET: 2 A/C Compressor Relay for vehicles. Replaces OEM part numbers: (90987-02028) ( 90080-87026) (90987-02022) . 100% satisfaction in every replacement relay. Make sure one of these part numbers fits your vehicle..
• These relays are commonly used for A/C compressors, starters, headlights, horns, fans, and other accessories..
• 100% SATISFACTION GUARANTEE: Every Openlot Automotive relay is covered with a 12-month replacement warranty and a 30-day money back.

Lum-Tec Comat B45 GMT Wrist Watch Beige | Nylon Strap

• Lum-Tec Comat B45 GMT Wrist Watch Beige | Nylon Strap.
• One of the newest addition's to Lum-Tec's notorious Combat B Series.
• the B45 features a tactical, military aesthetic with a reliable swiss movement in a GMT format..
• Like all Lum-Tec time pieces the B45 features MDV luminous technology for unrivaled visibility in almost any lighting..
• Assembled by hand in Ohio | 43mm 316L Surgical grade Stainless Steel | Titanium Carbide gunmetal PVD hard coating22mm Lug width | 200 meters of water resistance | Swiss Ronda 515.24H movement (GMT format).
• Anti-shock movement mounting system | Curved sapphire with military-grade inner AR coating | Threaded solid case back | Threaded crown with double diamond seals. | High tech Viton gaskets.

Solid State Relay, 90 to 280VAC, 25A

• Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
• Model: XRE-1D4840 Solid State Relay 40A DC to AC..
• Input voltage: 3-32V DC Output voltage: 24-480V AC.
• Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
• Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..

Solid State Relay SSR-40AA 40A AC to AC Input 80-250V AC and Output 24-380V AC (SSR-40 AA)

TE CONNECTIVITY/POTTER & BRUMFIELD T92P7A22-240 Power Relay, DPST-NO, 240VAC, 30A, Flange

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

• Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
• AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
• corridor delay switch, delay energy-saving products.
• Supply voltage: AC 220V power supply, Current: greater than 100mA.

DPST 1NO 1NC 8 Amp Power Relay Module (AC 110V/115V/120V)

• This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close..
• Input control signal: AC/DC 5V, AC/DC 12V, AC/DC24V, AC/DC48V, AC 115V, AC 230V Selectable..
• Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
• Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..

Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10

• 【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
• 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
• 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
• 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
• 【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).

WinnerEco 5pcs 1 Channel DC 5V Relay Switch Module for Raspberry Pi ARM AVR

• 1-channel relay interface board which can be controlled directly by a wide range of microcontrollers. Controllers includes AVR, PIC, ARM, PLC, etc..
• Relay output maximum contact is AC110V ~ AC250V 10A and DC30V 10A..
• Standard interface can be directly connected with microcontrollers..
• Red working status indicator for power on indication.Green working status indicator for relay the switch..
• It can control various appliances and other equipments with large current.Widely used for all MCU control, industrial sector, PLC control, smart home control..

HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger

• This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close..
• Input control signal: AC/DC 5V, AC/DC 12V, AC/DC24V, AC/DC48V, AC 115V, AC 230V Selectable..
• Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
• Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

• Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
• 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
• 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
• Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
• With Optical Coupling Isolation,Triggering More Reliable and Stable.
• 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.