Categories

Best Backlight Module

DFRobot DFR0063 LCD Display, 16x2 Character, White on Blue, 5V, 82 mm x 35 mm x 18 mm Size

  • LED LCD Universal TV Backlight Constant Current Backlight Lamp Driver Board Boost Step Up Module 10.8-24V to 15-80V 14-37 Inch.
Check Stock

MP3 WMA Decoder Board Audio Wireless Bluetooth 4.2 Module 12V, USB/SD Card/Bluetooth/FM Switching Support

  • [BLUETOOTH 4.2 SUPPORT]The mp3 module support Bluetooth 4.2. With blue backlight function, it support USB sound card function and Micro USB 5V power input. And also has power off memory function---memorize playing songs and volume before power off..
  • [SUPPORT FOLDER SELECtION FROM secure digital memory card OR USB DISK ]The mp3 module support folder selection and then music playback (remote control operation or panel operation) from secure digital memory card or USB disk..
  • [USB/SD CARD/BLUETOOTH/FM SWITCHING SUPPORT]The mp3 module support USB/SD card/Bluetooth/FM switching. Conversion prompt (Signal, Chinese, English voice prompt optional)..
  • [MULTIPLE MUSIC FORMATS SUPPORT]The decoder supports MP3/WMA/WAV/lossless APE/FLAC format music. MP3 Songs: 2-320kbps, WAV/WMA: 1411kbps and below..
  • [MULTI-FUNCTION SUPPORT]The mp3 module support secure digital memory card / USB flash switching, songs selection, volume adjustment, EQ, play /pause, stop, mute, shutdown, direct election song..
Check Stock

VU Meter 2x Panel VU Meter Warm Back Light Recording & Audio Level Amp with Driver Board

  • L/GND/R: This driver board with low level signal input terminals for connections are CD players, computer sound cards, the first stage, and other audio signal source device, wiring L, GND, RW respectively: Left, the right channel.
  • Power Consumption:Input AC / DC 12V-15V power supply for the drive plate. (Recommended independent power transformer, or a separate power supply for the winding. the backlight current is 45 mA when drive plate off work.
  • 2 Resistor:R1 and R2 are two adjustable resistors of driver board,which can control the size of the hands swing..
  • Rectifier RegulatorThe backlight DC12V power meter is used for rectifier regulator of the backlight driver board Please notice that the positive and negative head interface..
  • Package Content:2 x VU Panel Meter+1 x Driver Module+1 x Cable.
Check Stock

Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560

  • IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
  • Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
  • Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
  • With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
  • Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..
Check Stock

EPOMAKER GK64X RGB Hotswap 60% Mechanical Keyboard with Split Spacebar Module Fully Programmable for Gamers Gateron Brown Switch Grey White

  • Custom Space Key Module&Wide Compatibility. GK64X includes an extra space key module. With this module, you can easily change your Space key into....
  • 6 Side Bottom Light&16.8 Million RGB Backlight. RGB is such a cool element while playing games. GK64X fully know your needs and thus this model is....
  • 3 Layers Fully Programmable. Custom is not just a word. We make it true. Here you have more than 6 driver settings. Simply download the driver and you....
  • Professional 60% Keyboard. GK64X is 60% layout compact and lightweight mechanical keyboard. The chipset is 32 Bit MCU + 8M Flash on-board memory, and....
  • Type-C Cable&Improved ABS Case. GK64X got all you need for a custom keyboard. Except for the type-c cable for stable and fast connection, the....
Check Stock

EPOMAKER GK64X RGB Hotswap Custom DIY Kit for 60% Keyboard with Split Spacebar Module PCB Mounting Plate Case GK64X Black

  • Custom Space Key Module&Wide Compatibility. GX64X includes an extra space key module. With this module, you can easily change your Space key into....
  • 6 Side Bottom Light&16.8 Million RGB Backlight. RGB is such a cool element while playing games. GK64X fully know your needs and thus this model is....
  • 3 Layers Fully Programmable. Custom is not just a word. We make it true. Here you have more than 6 driver settings. Simply download the driver and you....
  • Professional 60% Keyboard. GK64X is 60% layout PCB, widely compatible with most of 60% keyboard case, you could change the case as you wish. The....
  • All-in-One Kit. GK64X got all you need for a custom keyboard: PCB, mounting plate, black ABS case, stabilizers, Type-C cable. More than that, you can....
Check Stock

7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor

  • 7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
  • Capacitive touch panel, support 5-point touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
  • Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
  • DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

Honeywell Home RTH6360D1002 5-2 Day Programmable Thermostat

  • Large LCD digital display with backlight, easy to read in various lighting conditions, C-wire needed for proper installation(Tips, The product include an Electric Control Module and sensors).
  • Optional 7 day programming and non-programmable, Enjoy the flexible settings via full 7-Days/4-Periods Setting on device, to reduce energy usage, savings on annual heating and cooling costs..
  • EASILY INSTALL YOURSELF: It only takes about 30 minutes, Because our installation guide provides detailed installation steps, compatiblity:3H/2C, 2H/1C Heat pump, Aux Heat, Ventilator, Electric heating, Water heating, Millivolt system, Gas, Compressor..
  • Easily install yourself: Pluggable Module design, make DIY more efficiently. Save money: Homeowners save up to 17% annually on heating or cooling costs..
  • Vacation set-point override to reduce energy use while away from home, easy programmable mode ensures the desired temperature is reached by the programmed time..
Check Stock

Getting Started with the micro:bit: Coding and Making with the BBC's Open Development Board (Make)

  • Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
  • Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
  • The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
  • We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
  • Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..
Check Stock

40x4 Character LCD (190x54) FSTN White

  • 【CHANGEABLE IIC ADDRESS】: The built-in standard driver chip SSD 1306 already exists in the libraries of Raspberry Pi and 51 Series,which makes programming very easy. This oled display can be used with different machine easily..
  • 【128 X 64 PIXELS】: With high resolution of 128 x 64 pixels, no need backlight, self-illumination, pixels stand outvery well even in a brighter circumstances like full sunlight..
  • 【COMPATIBLE WITH MANY CONTROL CHIPS】: This oled display can be widely use with 51 series, MSP430 series, STM32/2, CSR IC, etc. 4PCS male pins makes the lightweight connecting easily..
  • 【WIDE FIELD OF CLEAR VIEW】: 0.96inch OLED display module supports 180 degrees of view from up to down and right and left, which is convenient for you to clearly observe the information displayed from different angle..
  • 【EASY TO INSTALL】: With four square holes, our I2C OLED display module can be installed easily, truly convenient to use and simple you working..
Check Stock

Sports Watches: Aviator Watches, Diving Watches, Chronographs

  • Blue metalized top ring with 4 stainless steel accent screws.
  • Backlight digital module with alarm, chronograph, dual time, lap and military time functions.
Check Stock