Categories

Best Ball Bearing Roller

(12) Garage Door 2\ NYLON ROLLERS w/ Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • The ROP Shop replacement (Pack of 10) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(12) Garage Door 2\ Nylon Roller w Cap 4\ Stem 13 Ball Bearing Heavy Duty Smooth by The ROP Shop

  • The ROP Shop replacement (Pack of 2) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Abu Garcia C3 Catfish Special Baitcast Round Reel

  • 3 stainless steel ball bearings + 1 roller bearing(6500 size).
  • 2 stainless steel ball bearings + 1 roller bearing (7000 size).
Check Stock

Set of 10---2 Inch 13 Ball Nylon Garage Door Roller (7 Inch Stem)

  • A Quantity of 10 — 13 Ball Nylon Garage Door Rollers(7 inch stem) SEALED BEARING.
  • 13 ball bearing rating: 125lbs per roller @ 20,000 cycles 12′ door.
Check Stock

TICA SS500 Trout Fishing Series(Crappie/Pan Fishing Series) 5.2 Gear Ratio

  • 6 Rust-resistant ball bearings & 1 roller bearing.
  • soft touch handle knob with 2 stainless steel ball bearings.
Check Stock

Slide-Co 191687 Frameless Shower Door Top Bracket, 3/4\ x 1-1/2\ (Package of 2)

  • Used by a variety of frameless glass shower door manufacturers.
  • Adjustable bracket with diagonal mounting slot.
  • Extruded aluminum bracket with glazing vinyl.
  • 3/4in. O.D. oval edge nylon ball bearing roller.
  • Used on solid glass panels with no frame.
  • Silicone adhesive may be needed to install bracket on glass.
Check Stock

Garage Door Torsion Spring Center Support Bracket Residential Mini USA Center Support Universal

  • A Quantity of 10 -- 13 Ball Nylon Garage Door Rollers(7 inch stem) SEALED BEARING.
  • 13 ball bearing rating: 125lbs per roller @ 20,000 cycles 12' door.
Check Stock

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

  • The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Abu Garcia C3 Catfish Special Baitcast Round Reel

  • 3 stainless steel ball bearings plus 1 roller bearing(6500 size).
  • 2 stainless steel ball bearings plus 1 roller bearing (7000 size).
  • Carbon Matrix drag system provides smooth, consistent drag pressure across the entire drag range.
  • Extended bent handle with power knob gives anglers additional torque and power for hard pulling fish..
  • 6 pin centrifugal brake gives consistent brake pressure throughout the cast.
  • Synchronized level wind system improves line lay and castability.
Check Stock

Prime-Line D 1762 Sliding Door Roller Assembly with 1-1/4 inch Steel Ball Bearing

  • Used by Nu-Air and a variety of other sliding patio door manufacturers.
Check Stock

(6) Garage Door 2\ NYLON ROLLER Wheel w/ Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (1) Sealed Nylon Garage Door Roller.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Prime-Line D 1797 Sliding Door Roller, 1-1/2 inch Steel Ball Bearing, (2-pack)

  • Used to replace rollers that are 1-1/2 in. diameter.
  • Can be mounted using a rivet, a roll pin, drive pin, binder post and screw or bolt and nut to install the roller in place.
  • Contains 2 steel ball bearing wheels, 2 axle pins, 2 roll pins, 2 carriage bolts with nuts, 2 rivet axels and 2 binder posts with #8-32 x 1/2 in. screws.
  • Easy to install in less than 30 minutes with a few simple tools.
  • Can be used in many different patio door or closet door roller assemblies.
Check Stock

Garage Door 2\ NYLON ROLLER w/ Cap 7\ Stem 13 Ball Bearing Heavy Duty Smooth by The ROP Shop

  • The ROP Shop replacement (Pack of 2) 2" Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock