Categories

Best Band Nozzle Heater

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • 100% Brand New and All parts are tested and quality controlled prior to shipment..
  • Compatible with: MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures..
Check Stock

3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S

  • Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
  • Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
  • 0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
  • PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
  • Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....
Check Stock

VIVOHOME 1.6GPM 6L Portable Outdoor Propane Gas Tankless Water Heater Digital Display Overheating Protection RV Camping Water Heater Easy to Install White

  • ...tion, flame-out protection, anti-dry protection, high water pressure protection and low water flow protection, which prevent the product from doing harm to users, thus providing comfortable, safe and reliable bathing conditions.
  • ENERGY SAVING - With automatic ignition and flame-out modes, when you turn on the shower nozzle, the tank-less water heater automatically ignites, and when you turn off the shower nozzle, the water heater automatically extinguishes the flame.
  • With this unique design, our on demand water heater can save energy and ensure your safety at the same time.
  • WIDE APPLICATION - Our gas water heater is mainly used for outdoor hot showers, great for camping, trip to beaches or family vacations on mountains, in cabins, etc..
  • There is no longer cold outdoor shower, our water heater provides you a safe and comfortable hot shower at anytime and anywhere.
  • There is a cover on top of it to prevent dust and leaves from falling in when outdoors.
Check Stock

Portable Water Heater Propane Tankless - 6L 1.58GPM RV on demand Hot Gas Outdoor Digital Display Water Heater for Camping ,Boat,Cabins

  • ...o the beach, etc. Also you can wash your pets with this tankless water heater in outdoor. Using the handle of the gas water heater or the mounting bracket on the back to hang it. It only takes you a few minutes to install it..
  • 【Energy Saving】With automatic ignition and flameout modes, when you turn on the shower nozzle, the tankless water heater automatically ignites, and when you turn off the shower nozzle, the water heater automatically put out the flame.
  • With this unique design, our heater can save 11.5% energy for you and ensure your safety at the same time..
  • ★【Important Tips】To avoid gas leakage caused by improper sealing of the water heater, DO NOT TWINE TEFLON TAPE between gas regulator and gas inlet pipe. The tankless water heater will "caught on fire "with improper operation. Always check gas leakage before operation..
  • ★【2-Year Quality Warranty】We provide the 24-month warranty for the gas cooktop, replace a new set directly once it has any quality problems.If you encounter any product after-sales problems, you can always contact the RUINOPAR support team, we will give you a satisfactory solution within 24 hours,Professional team is always online..
Check Stock

YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece..
  • Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor.
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

Eapmic Mini Welding Station, 120W 938D Portable Hot Tweezers Temperature Adjustable LED Digital Soldering Iron Station for BGA SMD Repairing

  • ...than the traditional type.In addition, we provide a one-year warranty on the heat gun, contact us, any quality problems can be solved.
  • Meanwhile, the air gun heater uses new technology to make air gun's outlet wind way. The diaphragm pump and brush fan combine in two ways to make the perfect wind. When using a large nozzle, a spiral air flow will create a soft wind. When using a small nozzle, the air flow creates a strong rotating wind. The air flow is adjustable to accommodate a variety of purposes..
  • The handle (brushless fan model) is equipped with a sensor switch. As long as we grip the handle frame, the system will enter standby mode. It’s easy to operate in real time, meanwhile it can extend heater life..
  • FREE ACCESSORIES: Hot Air Gun, Hot Iron, Iron Stand, Gun Holder, IC Extractor, Rosin Flux, Solder Wire, Copper Wire, Heating Core, Pointed/Elbow Anti-static tweezers, Nozzles(Φ3,Φ5,Φ7,Φ10mm) and Tips (900M-T-I, B, K, 3C,4D).
Check Stock

BACOENG 2in1 862d+ SMD Soldering Iron Hot Air Soldering Station W/Various Accessories(Improved Version of 852 and 862)

  • ...than the traditional type.In addition, we provide a one-year warranty on the heat gun, contact us, any quality problems can be solved.
  • Meanwhile, the air gun heater uses new technology to make air gun's outlet wind way. The diaphragm pump and brush fan combine in two ways to make the perfect wind. When using a large nozzle, a spiral air flow will create a soft wind. When using a small nozzle, the air flow creates a strong rotating wind. The air flow is adjustable to accommodate a variety of purposes..
  • The handle (brushless fan model) is equipped with a sensor switch. As long as we grip the handle frame, the system will enter standby mode. It’s easy to operate in real time, meanwhile it can extend heater life..
  • FREE ACCESSORIES: Hot Air Gun, Hot Iron, Iron Stand, Gun Holder, IC Extractor, Rosin Flux, Solder Wire, Copper Wire, Heating Core, Pointed/Elbow Anti-static tweezers, Nozzles(Φ3,Φ5,Φ7,Φ10mm) and Tips (900M-T-I, B, K, 3C,4D).
Check Stock

LUOXINMAO 110V 380W Injected Mould Heating Element Band Heater 35mm x 35mm

  • Please see clearly the size and function of this product when you buy it. Thank you for buying! (If you have any questions about this product, welcome....
  • Band size : 35 x 35mm/1.4" x 1.4 inch (inner Dia.H).
  • Package Content : 1 x stainless steel band heater.
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

[Gulfcoast Robotics] Silicone Socks for MK8 Creality All Metal Hotend 3 Pack Blue

  • Thermal socks are made from heat resistant, non stick silicone material rated up to 280C.
  • Snug fit grips the the heater block and won't fall off during use.
  • Stabilizes hotend temperatures and reduces heat loss.
  • Protects the heater block and nozzle from plastic residue.
  • Compatible with MK8 all metal hotends for Creality 3D Printers from Gulfcoast Robotics, Micro Swiss and more.
Check Stock

Car Heater – Portable Windshield Defogger and Defroster – 12 V 12.5A Auto Fast Heating Cooling Fan – Safe Efficient Fast – for Easy Defrost and Demist Removal

  • 【Fast Heating】The powerful car heater can quickly heat the air without engine preheating, Quick defogging and defrosting, ideal for use in the car, camping, and caravan so that you will not be frozen in the cold winter and feel the thick warm current..
  • 【Safe and Durable】Our 12 V car heater is made of ABS and polymer heat-resistant hard plastic, which has the characteristics of automatic heating, anti-overheating, energy saving, low consumption, etc, it is the best in-car product for your car..
  • 【Use all year round】Our car heater comes with an adjustable air mode, there are two modes to choose from, the switch shows the fan or the heater. You can use a fan for cooling in summer and a heater for heating in winter..
  • 【Easy Installation】Just connect the portable car heater to the cigarette butt socket of the vehicle, and switch to heating or fan (make sure your car has a 12V lighter port), comes with a 360° rotating support nozzle, follow the control, more convenient Comfortable..
  • 【Low Noise Design】Different from the intense noise brought by other car heaters, our car air heaters are designed to be user-friendly, low noise, and have an air purification function to make you comfortable while driving..
Check Stock