Categories

Best Band Saws Jet

Olson Saw FB19482DB 3/8 by 0.025 by 82-Inch HEFB Band 6 TPI Hook Saw Blade

  • For hard or soft wood, plastic, mild steel and non-ferrous metal.
  • For all vertical, stationary, floor standing 2-wheel band saws.
  • These are heavy duty, durable, commercial grade band saw blades for industrial, woodworking, DIY and professional craftsmen.
  • 82" long fits 12″ Delta 28-190 & Jet JWBS 120 S.
Check Stock

Olson Saw FB23793DB 1/2 by 0.025 by 93-1/2-Inch HEFB Band 14 TPI Regular Saw Blade

  • For hard or soft wood, plastic, mild steel and non-ferrous metal.
  • For vertical, stationary, floor standing 2-wheel band saws.
  • These are heavy duty, durable, commercial grade band saw blades for industrial, woodworking, DIY and professional craftsmen.
  • Length 931⁄2″: Fits all 14″ Delta/Rockwell, Jet, Rikon, Steel City, General, Ridgid, older Sears Craftsman, Grizzly, Bridgewood, Woodtek,etc..
Check Stock

Thomegoods Urethane Band Saw Tires FIts 12 inch x 7/8 inch x .095 inch No Adhesive Needed Fits for Jet Grizzly, & Powermatic

  • Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it..
  • Make sure your insert recess has the locating pin on the side, not on the rear..
  • use on 14" Band Saws and 24" Scroll Saws.2&1/2" X .100 thick Please measure your saws recess to ensure proper fit.
  • They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports..
  • IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit.
Check Stock

Table Inserts (Pack of 3) for 14' Band saws or Scroll saws,Diameter: 2.5 in, Thickness: 0.1 in.(Please make sure this is your size)

  • Three inserts to protect your expensive blades Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it..
  • use on 14" Band Saws and 24" Scroll Saws..
  • 2&1/2" X .100 thick Please measure your saws recess to ensure proper fit They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports..
  • Make sure your insert recess has the locating pin on the side, not on the rear.
  • IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit.
Check Stock

[2 Pack] 12 inch x 7/8 inch x .095 inch Urethane Band Saw Tires - No Adhesive Needed - Compatible with Branded Bandsaws Including Jet Grizzly, Powermatic

  • use on 14" Band Saws and 24" Scroll Saws.Table Inserts (pack of 2). Material: Aluminum.
  • They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports..
  • Make sure your insert recess has the locating pin on the side , not on the rear.
  • IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit.
  • Please measure your saw as some Delta & Rockwell 14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required..
Check Stock

2-pack 45-69-0010 Blade Pulley Tire fits Milwaukee Band Saw Deep Cut 6230 6232-6 6225

  • Saws that use 44-7/8 in. Blades.These tires are 6 inches outside diameter and 1/2 inch wide..
  • Replacement rubber tire for Milwaukee electric corded band saws NOT the battery cordless ones..
  • These tires should fit any model of Milwaukee band saw 6225, 6226, 6230, 6230N, 6232-6, 6232-6N, 6236, 6236N, 6238N, and 6238..
  • These tires will also fit DeWalt band saw model DW328, DW328K, DW 329, DW329K, and D28770 type 1.These tires will also fit Porter Cable Porta-Band saws model 725, 726, 736, 7723, 7724, and 9725. The Porter Cable part number is AO2807..
Check Stock

Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

Powermatic 1791792B Low-Profile Thin Kerf Riving Knife for PM2000B Saw

  • Allows for use of thin kerf table saw blade for non-through cuts..
  • Compatibility: Designed to fit Powermatic PM2000B table saws..
  • JET Red Assurance Guarantee: Backed by JET's industry-leading one-year warranty against manufacturing defects..
Check Stock

PP Materials Easy to Use Strict Inspections Guaranteed Quality Woodworking Feather Board, Feather(Square feather board B blue)

  • ... don't need put your hands too close to the saw blade during the woodworking. Not only will Feather-loc protect your hands, it also helps prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw..
  • ✒【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more..
  • ✒【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork..
  • ✒【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts.This featherb....
Check Stock

45-69-0010 Blade Pulley Tire Replacement for Milwaukee Band Saws Deep Cut 6230 6232-6 6225 6232 6227- 2 Pack

  • 【Part number】The band saw rubber tire part number is 45-69-0010, 45690010.The best 6 inch band saw tires are durable..
  • 【Package includes】2 high-quality band saw rubber tires..
  • 【Size】These tires saws that use 44-7/8 in Blades. These tires are 6 inches outside diameter and 1/2 inch wide.
  • 【Compatibility】These tires are compatible with the Milwaukee portable band saw models 6225, 6226, 6230, 6230N, 6232-6, 6232-6N, 6236, 6236N, 6238N and 6238.These tires will fit DeWalt band saw models DW328, DW328K, DW329, DW329K, and D28770 type 1, as well as Porter Cable Porta-Band saws models 725, 726, 736, 7723, 7724, 9725. The Porter Cable part number is AO2807..
  • 【Tips】Check the belt regularly and replace it when worn to keep the blade properly tracked and the band saw performing for the best..
Check Stock

Olson Saw FB10080DB 3/16 by 0.025 by 80-Inch HEFB Band 10 TPI Regular Saw Blade

  • 3/16" Wide x 80" Long, 10 TPI, band saw blade, . 025" Thick, fits all 12" Sears Craftsman except new 91" Model, mild Scroll cutting in wood.
  • The product is easy to use and highly durable.
  • For hard or soft wood, plastic, mild steel and non-ferrous metal.
  • For all vertical, stationary, floor standing 2-wheel band saws.
  • These are heavy duty, durable, commercial grade band saw blades for industrial, woodworking, DIY and professional craftsmen.
Check Stock

QLOUNI 2 Pack Featherboards, Adjustable Woodworking Safety Device Feather-Loc for Table Saws Band Saws Router Tables Fences Woodworking Tools, 6.3 Inch Extended Table Saw Featherboard

  • ... don't need put your hands too close to the saw blade during the woodworking. Not only will Feather-loc protect your hands, it also helps prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw..
  • 【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more..
  • 【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork..
  • 【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts.This featherboard is a....
Check Stock