Categories

Best Bar Bending

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

KAKA Industrial BP-1650,50-Inch 16Gauge Box and Pan Sheet Metal Brake

  • Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • VERSATILITY PAN BOX BRKAE. With fingers installed, this high quality brake can be used as a full-length nose bar, turning the machine into a straight bending brake.
  • EASY OPERATING BRAKE. Sectioned fingers are easily removed for box bending and special forming operations. Stop rod is designed for repeatable bending.
  • HIGH FLEXIBILITY BRAKE. This 50-Inch box and pan brake has 16 assorted size section fingers which allows producing many sizes of boxed and pans. when bending at full capacity, the counterweight apron lift assist facilitates the process with little effort.
  • BRAOD APPLICATION. Thickness adjustment can be achieve merely via adjusting blade gap. This solid build sheet metal pan box brake incorporates all the features of our standard hand brakes but with greater range of applications.
Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

Lifewit Bar Cart, Home Bar Serving Cart, 2 Tier Drink Cart with 9 Wine Bottle Racks, Liquor Beverage Cart for Kitchen Dining Living Room Outdoor, 31.5" x 13" x 34.6", Gold

  • No More Bending: The assembled size of this drink cart is 31.5" x 13" x 34.6" (80 x 33.2 x 87.8 cm) to hold your wine and snacks. We increased the height of this cart. The height of the top shelf from the ground is extended to 34.6" (87.8 cm), making it convenient for you to take items without bending over..
  • Ample Storage Space: Need a decent place for the drinks? Put them all in! The bar cart features 2-row wine racks for 9 bottles of wine, and 2-row glass holders for 8 glasses. And the top and bottom open shelves allow you to store and display all your bar items..
  • Roll or Stay: Featuring four 360° swivel wheels (2 wheels with brakes) and a curved pusher, the bar cart for the home is easy to move smoothly without noise and can stop at your needs without accidental sliding. Serving your guests in style. And each shelf has a surrounding fence which is designed to prevent fragile items from falling by accident..
  • Light Luxury Style: Made of durable particle board and metal frame for strong loading capacity, this bar cart with wine rack is ideal as a multi-purpose home bar & serving cart in the living r....
Check Stock

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • Bending Forge Scrolling Welding Jig: Fits in 1 inch Hardy hole in an anvil or can be used in a vise. Perfect for making larger "S" Hooks, Bending Medium Stock, and Most any Scroll Work..
Check Stock

Connector Removal Tool Kit, 3 Pc

  • D-sub Connector removal tool, for easily pulling out the D-sub pin.
  • Groove design: the middle groove of the needle bar is designed to put the wire into the groove to protect the wire from damage.
  • Passivation process: the surface is bright and uniform, more wear-resistant and corrosion-resistant.
  • Stainless steel needle bar: ensure sufficient hardness, no bending, deformation and fracture.
  • Aluminum handle: safer and more comfortable to use.
Check Stock

KAKA Industrial BP-1650, 50" x 16 Gauge Bench Model Box & Pan Brake,Max Box Depth 4-Inch, Beam Adjustment 5/8” Pan and Box Brake Machine

  • Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • VERSATILITY PAN BOX BRKAE. With fingers installed, this high quality brake can be used as a full-length nose bar, turning the machine into a straight bending brake.
  • EASY OPERATING BRAKE. Sectioned fingers are easily removed for box bending and special forming operations. Stop rod is designed for repeatable bending.
  • HIGH FLEXIBILITY BRAKE. This 50-Inch box and pan brake has 16 assorted size section fingers which allows producing many sizes of boxed and pans. when bending at full capacity, the counterweight apron lift assist facilitates the process with little effort.
  • BRAOD APPLICATION. Thickness adjustment can be achieve merely via adjusting blade gap. This solid build sheet metal pan box brake incorporates all the features of our standard hand brakes but with greater range of applications.
Check Stock

Spank Spoon 800 (Gold, 800mm), Rise 40mm Unisex Adult Hanger, Mountain Bicycle Handlebar, Aluminium Alloy Handlebars, Bicycle Handlebars, Steady Handlebar

  • FURTHER IMPROVED STRENGTH OF THE HANGER: Our hangers are forged from top quality, specifically forged aluminium MGRs. We do this to give the hanger a new wider base creating even more strength to support high weight loads..
  • IMPACT ENDS: The Impact End caps the ends of the straight wall and reduces the risk of collapse in extreme hits and when force is applied on the thinner section of the bars..
  • DUAL EXTREME GRADUAL TAPER TECHNOLOGY: The Dual Extreme Gradual Taper process starts with XGT at the bar clamping zone, through the bend zones, to the thinnest areas at the control zone and back to thicker bar ends..
  • HIGH-QUALITY BUILT: We craft our handlebars with the serious rider in mind, producing an affordable, high-quality product that you can depend on..
  • CNC BENDING: Spank uses advanced, automated 3D CNC bending machines to bend the bars. This method gives them a better consistency in size and shape, resulting in lighter weight, more powerful bikes that can withstand damage..
Check Stock

Hilmor Compact Bender Kit with Reverse Bending Attachment for 1/4" - 7/8" Tube and Pipe Bending, Black, CBKRB 1926598

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • PRODUCT DIMENSIONS: Length: 16.4", Width: 12.3", Height: 3.3", Weight: 10.8 lbs.
Check Stock

gymmatsdirect Gymnastics Bar for Kids Adjustable Horizontal Junior Training Kip Bars with Mat Optional Ideal for Gymnasts 1-4 Levels for Home

  • UPGRADED DESIGN and UNIQUE MATERIAL - New bending base structure design to avoid sides waggle, more sturdy and safer. We upgraded the fiberglass bar,....
  • HEAVY DUTY and STURDY - The base of gymnastic bar is well-constructed with 2 steel tube (upto 2mm thick) and 2 steel tie tube(others brand is 1 piece....
  • TRIPLE LOCKING ADJUSTABLE HEIGHT BAR - Specially designed triple screw knobs not only make sure kip bar is locked safely, but make it easy to adjusts....
  • EASY TO ASSEMBLE - Our gymnastics bar installation takes only five steps. With bolts and the only tool required is a wrench, assembly is easy and....
  • HASSLE-FREE - Gymmatsdirect brand item provides with a 3-Year factory . No Extra Charge for Replacement Part. If your item is damaged during shipping....
Check Stock