Mars 11917
- Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
- Fitting connects to tubing on one end and a female connector on the other.
- Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
- Buna-N O-ring elastomer seal for long cycle life and repeatable, leak-free connection.
- Single-barb for increased pull-off resistance compared to three-barb styles.
Check StockClosetMaid 75355 Wire Shelf End Caps, 24 Large and 60 Small, 84 Pack, White
- Large end caps cover the large rod, 0 gauge, on the Shelf & Rod wire shelf.
- End caps are designed to be used with ClosetMaid Shelf & Rod shelving.
- One package contains 60 small end caps and 24 large end caps.
Check StockSharkBite 23056LF 1/2" X 1/4" Od Compression Angle Stop
- Shark Bite 1/2″ x 1/4″ OD brass barb compression chrome angle stop quarter turn 1 per bag.
- Suitable for installing at the end of an ice maker supply line or waste drain.
- The Shark Bite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired.
Check StockSUNGATOR 12-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End
- 【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 12 pack.
- 【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
- 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
- 【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
- 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
Check StockSUNGATOR 6-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter Brass Pipe Fittings Male Threaded End
- 【PREMIUM MATERIAL】: High quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, 3/8”barb X 1/4”NPT male pipe, 6 pack.
- 【DURABLE】: The barb fitting is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings.
- 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective connection.
- 【FUNCTION】: Barb head for connecting hoses, NPT end used to connect NPT pipes, brass is corrosion resistant which can apply to water, gas, oil and fuel as well as air tools.
- 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
Check StockDorman 84949 Electrical Switch Modular Mounting Panels Right Center Left, 3 Pack
- Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
- Fitting connects to tubing on one end and a male connector on the other.
- Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
- Single-barb design for increased pull-off resistance compared to three-barb styles.
- Nickel-plated brass hex nut included for secure fit.
Check StockMECCANIXITY Round End Caps Rubber Cover 3/16" Vinyl Screw Protector for Screw Bolt Pipe Tubing 50pcs
- The flexible rubber end caps are widely used for screw thread protectors, bolt caps, metal, and plastic pipe tubing end cover, furniture feet end protectors, etc..
- Vinyl end caps, is in size of : 4.5mm(3/16-inch) inner dia, white.
- Soft, lightweight, small size, durable, and long service life.
- Steps of installation: 1. Prepare rubber end covers with appropriate size.
- 2. Insert the end of screws, bolts, pipes, etc..
- Please pay attention to the selection of rubber end caps with appropriate size, especially the inner diameter.
Check StockValterra A04-0151 EZ Hose Carrier - 46\
- RV HOSE CARRIER: Fits most 3" drain hoses and fittings with the exception of one-piece 90-degree sewer fittings.
- CONVENIENT INSTALLATION: End caps come assembled with fixed, pre-glued mounting brackets and includes self-tapping screws for easy installation.
- VENTED END CAPS: End caps feature a vented design to prevent the buildup of moisture.
- LOCKABLE DESIGN: End caps have a loop that allows the addition of a padlock for extra security.
- IDEAL SIZE: Features an inside diameter of 4.45" for versatile storage options.
Check StockWORKPRO W017004A Bolt Cutter, Bi-Material Handle with Soft Rubber Grip, 14\
- Product 1: Note: Cutting Locks Is Not Recommended.
- Product 1: Drop Forged Chrome Molybdenum Steel And Powder Coated Jaws For Sure, Efficient Cutting And Long Life. Ergonomic Bi-Material Anti-Slip Grips Provide Greater Control And Comfort In Cutting.
- Product 1: Classic Lever-Fulcrum Design And Precisely Aligned Blades Deliver Added Leverage With Less Effort.
- Product 1: Cutting Capacity: Hrc≤42: 7/32-Inch(5Mm Maximum).
- Product 2: Large end caps cover the large rod, 0 gauge, on the Shelf & Rod wire shelf.
- Product 2: Small end caps are for the 4-gauge wire.
- Product 2: End caps are designed to be used with ClosetMaid Shelf & Rod shelving.
- Product 2: One package contains 60 small end caps and 24 large end caps.
Check Stock
SUNGATOR 12-Pack Air Hose Fittings 1/4 NPT to 3/8 Barb Hose Barb Adapter with Sealant Brass Pipe Fittings Male Threaded with 12 Pcs Hose Clamp
- 【Upgraded Hose Barb Kit】 : 12 air hose adapters with sealant and 12 hose clamps.
- 【Improved Threaded End】 : Coated the male end with select sealant to a snug fit for creating an air tight environment. You can be relieved from the preparation of the sealing tape..
- 【 High-quality Hose Clamps】 : Stainless products can be rustproof. With the hose end applied a clamp, it can help bite and lock the pipe more tightly. They wont break easily and the flexible long belt can be adjusted to your pipe's size..
- 【 Sturdy Material】 : Brass made, an abrasion resistant material for use in prevention and protection of fittings against corrosion,scratches,dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand up to 100 °C (212 °F) and long period of wear and tear..
- 【Versitile Applications】 : Impotable water, gas, oil, fuel and air tools are preferable and they also work well in various pipes.
Check Stock
Tapcooler Beer Valve Connector for Direct Keg Connection
- DURABLE MATERIAL : 304 stainless steel construction makes the keg coupler more durable and sanitary. stainless will keep the best taste of your beverage, the healthy drinking is "on-the-go" !!.
- NO LEAKS: Thoughtful 5/16" gas in barb & 3/16"' liquid out barb setting, allows air and beer line connection end closely to attach to coupler, Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking. Features fully integrated 55-PSI pressure relief valve as well as a ball check valve which prevents back flow of beer and can be easily removed for cleaning..
- EFFORTLESS INSTALLATION: This coupler is easy to operate, you just need to simply push down and turn to properly couple the keg. Compared to handle-type low profile coupler, this low profile coupler avoids the space of operation handle and is designed with a 90° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing..
- SPACE SAVING: Low profile D system coupler features a space saving....
Check StockValterra 50\-94\ A04-5094 Adjustable EZ Hose Carrier-50, White
- RV HOSE CARRIER: Fits most 3" drain hoses and fittings with the exception of one-piece 90-degree sewer fittings.
- CONVENIENT INSTALLATION: End caps come assembled with fixed, pre-glued mounting brackets and includes self-tapping screws for easy installation.
- VENTED END CAPS: End caps feature a vented design to prevent the buildup of moisture.
- LOCKABLE DESIGN: End caps have a loop that allows the addition of a padlock for extra security.
- IDEAL SIZE: Features an inside diameter of 4.45" for versatile storage options.
Check Stock2 Pack Brass Hose Fitting Adapter 3/8 Barb x 1/4 NPT Male Pipe
- Standard 1/4 npt to 3/8 barb for connecting a hose to a male threaded connection of a different diameter..
- Brass material make it strongest construction for prolonged service life,Easy to use and reliable..
- Hose barb on one end and male NPT threads on the other, no leaking and durable, easy to connect and disconnect..
- Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads..
- Package include 2 Pack 3/8" Hose ID x 1/4" NPT Male Pipe brass fittings..
Check Stock
