Best Barb Reducer Bushings
DP Dynamic Power 3/8-In. NPT to 1/4 in. Air Line Filter
- Use as primary filter on 1/4-in. hose fitting system.
- Remove dirt and liquid contaminants from air system.
- Full flow ports support maximum air flow.
Check StockBELL PSB37550GY Single-Gang Weatherproof Three 1/2 in. or 3/4 in. Threaded Outlets, 2 in, Gray
- Mounting hardware and installation instructions included.
- Includes (2) 3/4 inch closure plugs and (3) reducer bushings.
Check StockBELL PDB77550GY Two-Gang Weatherproof Box Seven 1/2 in. or 3/4 in. Threaded Outlets, 2 in, Gray
- Mounting hardware and installation instructions included.
- Includes (6) 3/4In. Closure plugs and (7) reducer bushings.
Check StockiO HVAC Controls HD-1616-PO 16 Inch X 16 Inch 2-Wire, Two-Position Rectangular Motorized Zone Damper - Powered Open
- Includes two 3/4 x 1/2 inch reducer bushings.
- Pressure regulator setpoint is 3.5 inch water column.
Check StockAIDA Duplex Receptacle Wall Outlet Residential 3-Wire Self-Grounding 15Amp 125V UL Listed Push & Side Wire White 10 Pack
- Mounting hardware and installation instructions included.
- Includes (2) 3/4 inch closure plugs and (3) reducer bushings.
Check StockBeduan Brass Hose Barb Reducer, 3/8\ to 5/16\ Barb Hose ID, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel
- Material: Brass. Connections: 3/8" x 5/16".
- Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check StockBeduan Brass Hose Barb Reducer 5/16 to 1/4 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel 4Pcs
- Material: Brass. Connections: 5/16" x 1/4".
- Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check StockQuickun Brass Hose Barb Reducer 3/8 to 1/2 Barbed Reducer Fitting Reducing Splicer Mender Union Adapter for Air Water Fuel Pack of 3
- Material: Brass. Connections size: 1/2" x 3/8".
- Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check StockBrass Hose Barb Reducer, 3/8\ to 5/16\ Barb Hose ID, Reducing Barb Brabed Fittings Splicer Mender Union Air Gas Water Fuel Line Heater Garden Pond Poly Tubing Adapter (Pack of 2)
- ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with Brass Hose Barb Reducer 3/8" x 5/16.
Check StockJoyTube Hose Barb Reducer 3/8 to 1/4 Barb Hose ID Stainless Steel Reducing Union Fittings Air Water Fuel Pack of 6
- Made of 304 stainless steel, strength, resistance and ductility at high temperatures..
- The reducer hose barb fitting connects on both ends for two different ID hoses..
- Working temperature range from -40 to +160 degrees F..
- Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
- The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule..
Check StockJoyTube Hose Barb Reducer 3/8\ to 5/16\ Barb Hose ID Stainless Steel Reducing Union Fittings Air Water Fuel (Pack of 6)
- Made of 304 stainless steel, strength, resistance and ductility at high temperatures..
- The reducer hose barb fitting connects on both ends for two different ID hoses..
- Working temperature range from -40 to +160 degrees F..
- Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
- The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule..
Check StockBeduan Brass Hose Barb Reducer 5/16 to 3/16 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel With 8 Hose Clamp Pack of 4
- Material: Brass. Connections: 5/16" x 3/16".
- Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check StockWalter 12E647 Bench Grinding Wheel – Fine Grit 60 10 in Finishing Wheel
- Applications: grinding wheel is designed to work effortlessly with bench and pedestal grinders for surface preparations. It can deliver quick and rough grinding operations.
- Longevity: abrasive finishing wheel is durable and with its exceptional performance, it can be used on all steel surfaces.
- Versatile Wheel: surface finishing wheel is provided with nested reducer bushings that can fit on a number of shafts with diameters — 1 in., 3/4 in., 5/8 in., and 1/2 in..
- Efficiency: abrasive wheel with superior life works at high rotational speed. The arbor hole is perfectly balanced to maintain the constant speed during finishing jobs.
- Specifications: type 1 bench grinding wheel measures 10 in. in diameter, 1 in. in thickness, and has 1 in. arbor hole diameter. This durable wheel has a maximum rotational speed of 2500 RPM.
Check Stock