Categories

Best Barbed Quick Connect Fittings

Raindrip R280DT BLK 1/4-Inch by 50-Foot Black Drip-A-Long with Fittings

  • Slowly waters the soil around your plants for complete root zone hydration.
  • the dripline emits water along the entire line.
  • Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows.
  • Dripline can be cut to size and sections connect together with the included ¼ in. barbed fittings.
  • Flow rate may vary along the length of dripline with higher flow closer to the water source.
  • Use with a ¾ in. FHT X ¼ in. adapter to connect to water source.
  • Connects with included ¾ in. FHT X ¼ in. Adapter.
  • layout dripline next to plants to be watered.
  • ½ GPH non pressure-compensating emitters are spaced 12 in. apart.
  • turbulent flow design flushes out sediments which can potentially clog emitters.
  • Flexible tubing bends to accommodate curved irrigation areas as well as handle straight runs.
  • Kit includes: 50 ft. of ¼ in. Dripline preassembled with ½ GPH drippers.
  • 5 barbed tees, 5 barbed elbows, 5 barbed couplings and 5 end plugs.
Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

  • ✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
  • ✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
  • ✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
  • ✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
  • ✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..
Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

JOYPRO 60 Pieces Drip Irrigation 1/4 Barbed Elbow Fittings Barbed Connectors for 1/4 Inch Irrigation Tubing Drip Line Elbow for Drip Sprinkler Garden Lawn Systems

  • 【PERFECT MATCH 1/4 INCH IRRIGATION TUBING】JOYPRO 1/4 inch irrigation elbow fittings can connect to most of the standard 1/4" drip irrigation tubing. (Note: Please check the size of tubing carefully before purchasing.).
  • 【MADE OF DURABLE PLASTIC MATERIAL】JORPRO drip line elbows are made of high quality engineering plastics, so our irrigation elbow connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others..
  • 【EASY TO INSTALL】It is easy to install without any glue, tools or clamps. Directly insert this irrigation tubing elbow at the ends of the water pipe, the barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection..
  • 【PACKAGE LIST】It comes with 60 pieces barbed elbow connectors, which let you connect your irrigation systems as you wish..
  • 【WIDE APPLICATION】These elbow fittings for 1/4 inch sprinkler hose is ideal for garden, flower bed, greenhouse, farm, lawn, patio and other agricultural watering system..
Check Stock

Habitech Irrigation Fittings Kit for 1/2 Tubing - 20 Piece Set - 6 Tees 6 Couplings 2 Elbows 6 End Cap Plugs - Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems

  • Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6....
  • These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit,....
  • The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with....
  • Save money and time buying everything you need at once in this 20-Piece Set. Jumpstart your drip irrigation system installation with this set of....
  • Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If....
Check Stock

Rain Bird T63-100S Drip Irrigation 1/2' (.630' OD) Blank Distribution Tubing, 100' Roll, Black

  • Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas.
  • Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits).
  • Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.
  • Self-dispensing coil reduces layout time and speeds installation.
  • Unique Micro-Porous design creates an ultra-tight connection to fittings.
  • Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately).
  • Tubing specifications: 0.634" outside diameter, 0.536" inside diameter, 0.049” wall thickness.
  • Operating pressure: 0 to 70 psi. Tap into side with barbed drip emitters and 1/4 in. tubing to run water directly to plants.
Check Stock

Raindrip R560DP Automatic Drip Irrigation Watering Kit with Timer for Containers and Hanging Baskets Waters up to 20 Plants Includes Timer with Customizable Settings and 20 PC Drippers,Black

  • SAVE TIME AND EFFORT: This plant watering kit has everything you need to get started with drip irrigation and precisely water up to twenty individual plants.
  • Use the kit to build, expand, or repair a drip irrigation system.
  • INSTALL IN 3 EASY STEPS: 1) Connect timer and tubing to water source.
  • Customizable system for your garden's potted plants, hanging baskets, or planter beds.
  • IDEAL FOR ANY LEVEL GARDENER: Easy to customize, install, and operate.
  • Kits contain all the components you need to set up your own drip system.
  • EASY TO CONNECT: screw threaded ends together.
  • push barbed ends on fittings and emitters into tubing opening.
  • KIT INCLUDES: Water timer, 75 ft. of 1/4 in. supply tubing with 3/4 in. FHT adapter, 20 PC drippers, tubing hold-down clamps, barbed couplings, elbows, and tees.
Check Stock

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers,....
  • 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
  • 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check Stock

Kalolary 150 Pieces 1/4’’ Straight Barbed Connectors Fitting Drip Irrigation Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

  • 【Package Includes】150 pieces of 1/4 inch irrigation straight coupling connectors are included in 1 set. Sufficient quantity to use or take as backup,they are practical fittings for tubing..
  • 【Fits 1/4 inch irrigation hose】This barbed coupling fittings connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Note:Please check the size carefully before purchasing..
  • 【Long-lasting】Made of high quality engineering plastics, durable, strong, water resistant, chemical-resistant materials to assure long life..
  • 【Easy to Insatll】Directly insert this irrigation coupling at the ends of the water pipe, there is no need of any glue or tools, making garden work more convenient and much easier. Tips: Heat the end of hose to help it slide on this coupling..
  • 【Wide range of applications:】This coupling fittings for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

BEADNOVA Drip Irrigation Parts 10 Pcs 1/2 Inch Barbed End Plugs Goof Plugs Drip Irrigation Fittings Drip Line Connectors for 1/2 Inch Irrigation Tubing Garden Watering System 10pcs

  • PACKAGE INCLUDES: Includes in a pack 10 pcs end plug barbed connectors, approximately 1.7” or 40mm long. Drip irrigation barded suitable for 1/2 Inch irrigation tubing..
  • STRONG MATERIAL: This end plug is made of high grade plastic which is strong and good for both indoor and outdoor use..
  • EASY INSTALLATION: Connect irrigation tubing by simply insert this barbed connector at the ends of the tube. No tools or glue required. Push the tube firmly into the irrigation barbed to avoid leakage. Soften the end of tube with blower if you find the tube is too stiff before inserting..
  • WIDE APPLICATIONS: These irrigation fittings are essential for watering system, drip system and sprinkle system in vegetable gardens, flower beds, greenhouse and patio. Use irrigation barbed to build yourself a minimal maintenance watering system, save water and energy..
  • COME WITH STORAGE BAG: Barded connectors are packed into a plastic bag for easy storage..
Check Stock

280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • ...enient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check the size carefully before purchasing；If needed, you can use a he....
Check Stock

Legines 1/8 Hose Barb Tee 1/8 x 1/8 x 1/8 inch Brass Barbed T Fitting 3 Ways Hoses Connector 2 pcs

  • Barb tee is used to connect lines for air, fuel, oil and inert gases in a quick and simple way..
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).For use with plastic or rubber hose.
  • Typical Application: Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock