Best Barbed Thread Adapters
Xtenzi Car Radio Antenna Adapter Kit XT3234 Compatible with GM, Kia, Hummer, Matrix, Isuzu, Chevrolet Select 86-08
- Xtenzi antenna adapters Kit XT3234 ,For adding CD FM modulator,Barbed Antenna Adapter Kit,.
- Compatible with select 88-06 GM vehicles equipped with barbed antenna connectors,.
- Factory Radio with Flat Connector to Aftermarket Antenna.
- Function and compatibility with 40-GM30, BAA3,BAA4.
- Manufactured to the Highest Quality Available , Meets the standard of excellence..
Check StockFERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings
- 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
- 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting(ball valve, wort chillers,....
- 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
- 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
- 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check StockLittle Giant PES-290-PW 115-Volt, 300 GPH Magnetic Drive Fountain/Pond Pump with 6-Ft. Cord, Black, 566717
- ENERGY EFFICIENT MAGNETIC DRIVE PUMP: 0.4 running Amps, 8 Watts, UL listed in the USA and Canada.
- APPLICATIONS: designed for water fountains and small ponds up to 300 gallons, hydroponics and other water transfer applications.
- FLOW CONTROL VALVE: built-in, adjustable flow control valve helps set the perfect flow level for fountains or hydroponic applications.
- BUILT TO LAST: features such as continuous-duty motor.
- ceramic shaft, and built-in screen to help protect the impeller increased the life cycle of the pump.
- 1/2-inch barbed discharge with 5/8-inch, and 3/4-inch barbed adapters included.
Check StockABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions
- Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
- Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
- FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
- Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
- Recommended for older low-pressure systems with mechanical fuel pumps.
- Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
- EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
- PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
- Comes with flex hoses, fittings, and instructions for quick reference.
- Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check StockLittle Giant PES-380-PW 115-Volt, 380 GPH Magnetic Drive Pump for Fountains and Small Ponds with 15-Ft. Cord, Black, 566718
- ENERGY EFFICIENT MAGNETIC DRIVE PUMP: 0.64 running Amps, 33 Watts, UL listed in the USA and Canada.
- APPLICATIONS: designed for water fountains and small ponds up to 350 gallons, hydroponics and other water transfer applications.
- FLOW CONTROL VALVE: built-in, adjustable flow control valve helps set the perfect flow level for fountains or hydroponic applications.
- BUILT TO LAST: features such as continuous-duty motor.
- ceramic shaft, and built-in screen to help protect the impeller increased the life cycle of the pump.
- 1/2-inch barbed discharge with 5/8-inch, and 3/4-inch barbed adapters included.
Check StockMityvac MVA670 Power Steering Adapter Kit Removes Trapped Air from Power Steering Systems Includes Three Adapters – One Universal as Well as a Ford and GM Version MITMVA670
- The folllowing adapters are included: MVA662 Ford Power Steering Adapter.
- Featuring a robust design and construction, all three adapters include an inline, barbed connection for a 1⁄4 in. internal diameter hose..
- These adapters form an airtight seal in the neck of a vehicle’s power steering pump allowing for air evacuation..
- Designed to function with Mityvac hand pump models MV8000 and MV8500 as well as most other brands of hand-vacuum pumps..
- The MVA665 is available separately and can be interchanged with the inline connector on MVA661 and MVA662 for applications with limited overhead....
Check StockAnt C Shop 3 Pack 510 Thread Magnetic Ring Adapter
- Ultra lightweight and extremely durable, 100% satisfaction guaranteed..
- Easy to install and disassemble thread 510 thread magnetic adapter..
- If you have any questions about our products, please contact us in time, we will reply you within 24 hours, and we will provide you with satisfactory solutions..
Check StockSEAFLO 12V 3.0 GPM 45 PSI Water Diaphragm Pressure Pump - 4 Year Warranty!!!
- 4 Year Warranty from Authorized Seaflo USA Dealer!!!.
- 1/2" Threaded NPT Inlet/Outlet - includes 1/2" Barbed Hose Adapters - Mesh Inlet Strainer.
- 12V DC Current Draw 3.0 amps (6.0 Max Amps).
Check StockBlumat 5 Pieces - 1/4\ Quick Connect On/Off Valve for Tubing on Drip Systems and Irrigation Water Supply (5)
- QUICK AND EASY installation to help get your irrigation or drip system setup quickly without any complications. Just attach the barbed adapters to your tubing and screw them onto the fitting..
- QUICK-CONNECT ADAPTERS on both sides allow you to frequently change supply or discharge lines without any difficulty or damaging the end of your tubing..
- DURABLE PLASTIC composition is corrosion and weather resistant so will last indoors and outdoors..
- 1/4" SIZE is compatible with BLUMAT and BLUSOAK systems including.
- Tropf Blumat, Classic (Junior) Blumat, and Mega BluSoak..
- GENUINE BLUMAT parts come with a 100% money back guarantee so you can purchase confidently..
Check StockBlumat 10 Pack - 8mm Quick Connect On/Off Valve for Tubing on Drip Systems and Irrigation Water Supply
- QUICK AND EASY installation to help get your irrigation or drip system setup quickly without any complications. Just attach the barbed adapters to your tubing and screw them onto the fitting..
- QUICK-CONNECT ADAPTERS on both sides allow you to frequently change supply or discharge lines without any difficulty or damaging the end of your tubing..
- DURABLE PLASTIC composition is corrosion and weather resistant so will last indoors and outdoors..
- 8mm SIZE is compatible with BLUMAT and BLUSOAK systems including.
- Tropf Blumat, Classic (Junior) Blumat, and Mega BluSoak..
- GENUINE BLUMAT parts come with a 100% money back guarantee so you can purchase confidently..
Check StockABN Brake Bleeder Kit Universal Vacuum Pump & Brake Bleeding Tester Set for Automotive Service & Airtight Food Canning
- BLEED BRAKES OR CAN FOOD: Use the ABN Universal 2 in 1 Vacuum Pump and Brake Bleeding Tester Kit to service the brakes and test vacuum systems on your....
- Attach the tubing to the bleeder valve on a disc brake caliper, pump the vacuum, crank the bleeder valve, and watch the....
- BUILT TO LAST: Solid brass cylinder, cylinder head, and piston with anodized steel handle frame.
- Cushioned pistol grip handle on vacuum pump for comfort and decreased user fatigue.
- PACKAGE CONTENTS: Package includes a pump with precision gauge, two 2-foot tubes, multi-use adapters, and brake fluid reservoir.
Check StockLT Sport Manual Transmission Gear Shift Knob Stick Shifter Boot Cover Black PVC Leather
- 【Material】Shift knobs made with high quality plastic with carbon fiber pattern and adapters made with aluminum..
- 【Unique style】Round ball, carbon fiber style, easy to hold the shift..
- 【Size】Diameter: 2"(50 mm), Height: 1.9"(49.6 mm) Thread of shift: M12*1.25 Thread of 3 adapters (M8*1.25, M10*1.25, M10*1.5).
- 【Universal Fitment】Gear Shift knob Fits for most manual cars' shifter, such as for Acura, for Honda, for Mazda, for Mitsubishi, for Toyota, for Scion, for Nissan, for Infiniti, for Subaru and more..
- 【Package Include】 1*shift knob(M12*1.25), 3 adapters (M8*1.25, M10*1.25, M10*1.5)Note: 1.Please make sure if your shifter thread is one of M12*1.25, M10*1.25, M10*1.5, M8*1.25.
Check StockRYANSTAR Carbon Fiber Shift Knob Gear Shifter Knobs with 3 Adapters Round Ball Stick Shifter Level Red
- 【Material】Shift knobs made with high quality plastic with carbon fiber pattern and adapters made with aluminum..
- 【Unique style】Round ball, carbon fiber style, easy to hold the shift..
- 【Size】 Diameter: 2"(50 mm), Height: 1.9"(49.6 mm) Thread of shift: M12*1.25 Thread of 3 adapters (M8*1.25, M10*1.25, M10*1.5).
- 【Universal Fitment】 Gear Shift knob Fits for most manual cars' shifter, such as for Acura, for Honda, for Mazda, for Mitsubishi, for Toyota, for Scion, for Nissan, for Infiniti, for Subaru and more..
- 【Package Include】1*shift knob(M12*1.25), 3 adapters (M8*1.25, M10*1.25, M10*1.5)Note:1.Please make sure if your shifter thread is one of M12*1.25, M10*1.25, M10*1.5, M8*1.25.
Check Stock