Best Bare Optical Fiber Attenuator

XLBH Optical Fiber Accessories 5PCS/Bag FC UPC Female to Male 15dB Fiber Optic Attenuator FC UPC 15db Female Male Fiber Optic Attenuator Adapter Connector

• FAST CONNECTION: Quick assembly SC connector can provide quick and easy termination of fibers in the field.
• EXCELLENT PERFORMANCE: fiber optic adapter has good repeatability, stable performance, high success rate and high reliability.
• AUXILIARY EQUIPMENT: The attenuator can effectively suppress loop noise, eliminate interference, and prevent accidental damage to the main control terminal.
• WIDE APPLICATION: optic fiber quick connectors can be widely Used for fiber optical communication system,optical distribution frame (ODF), FTTH, CATV, etc.
• CERAMIC FERRULE: optic fiber connector built in ceramic ferrule, low insertion loss, wear resistance and long service life.

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

• FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
• Cleaving angle: 0.5-0.8 degrees with single fiber..
• Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
• Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
• High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
• Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..

QIIRUN TM20 Fiber Cleaver with 24 Cleaving Spots by Precision CNC Machining, Optical Fiber Cutter Tool with 3 in 1 Fixture and Automatic Rebound Slider Rail

• TM20 Fiber Cleaver adopts aviation aluminum material and is machined by precision CNC machining tool, which ensures this fiber cleaver of high precision and durable.
• This Optical Fiber Cutter also adopts Anti-broken Fiber Design, even if it’s cold, it will not crush fibers.
• TM20 Fiber Cleaver uses high quality stainless steel slider rail, smooth and non-cart. Its automatic rebound design provides higher efficiency.
• 3 in 1 Fiber Fixture is suitable for bare fiber, pigtail and leather cable. Tungsten Steel Blade has 24 cleaving spots with 48000 cutting times, and its cleave angle is≤0.5°.
• With fiber collector, this fiber cleaver is compact and light-weight, convenient to carry.

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

• ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
• The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
• This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
• Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....

Fairfield Circuitry The Accountant

• No integrated circuits in the signal path Transformer-balanced input and output Selectable output transformer loading resistors by an internal T4-style electro-optical attenuator Very simple to operate with only two main controls, Gain and Peak Reduction A big meter shows gain reduction or output level at two different reference levels Hardwire bypass switch for easy comparisons XLR and TRS input and output jacks for flexible connections Link jack and switch for conne.
• The COMP-3A is a single-channel vintage-style Compressor/Leveler.
• The signal path uses only discrete components like resistors, capacitors and transistors, and the input and output is transformer balanced using two different transformers, each one optimized for its purpose.
• This is the way audio components were built before integrated circuits became available.
• Integrated circuits are small and cheap and widely used in most modern designs.

Fibergaga-1m(3ft) OS2 SC/APC to SC/APC Fiber Patch Cable Single Mode Fiber, Simplex, Length Option: 0.5M(1.6ft)-75M(246ft) 9/125μm Fiber Optic Cable

• fiber information: 1m(3ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
• The model of this fiber is a 1m- 3ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
• This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
• Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
• We have focused on optical fiber jumpers for 15 years. Each cable is ....

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

• 20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
• PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
• MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
• PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
• AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.

6 Pcs Fiber Optical Tool Accessory Fiber Sleeve Core Spare Ceramic Inserts and Mental Heads for Visual Fault Locator Fiber Cable Tester

• It is suitable for connecting home butterfly cable.
• Using V groove butt joint technology mature, applicable to the multimode optical fiber connection.
• Free offixture design, operation time less than a minute.
• For fiber optic butting optical fiber or optical fiber butt pigtail, this is to do joint,.
• (butting optical fiber pigtail pigtail fiber core refers to head butt fiber and pigtail instead of the former said), for the cold connection thing called optical fiber cold sub..

Mophorn AI-9 Fiber Fusion Splicer with 5 Seconds Splicing Time Melting 15 Seconds Heating 7800mah Fusion Splicer Machine Optical Fiber Cleaver Kit for Optical Fiber & Cable Projects

• ...ium battery, charging time ≤ 3.5 hours,continuous splicing and heating about 200 times..
• 【USED BROADLY】- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages: English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields..

Digital Toslink Fiber Optical Audio Splitter Cable 1 in 2 Out HOSONGIN Toslink Fiber Optic Adapter Cable Fiber Converter Digital Optical Audio Adapter Cable

• Toslink Fiber Optical Audio Splitter 1 in 2 Out: HOSONGIN Toslink Fiber Optical Audio Splitter supports 1 male input to 2 female outputs, you can....
• Toslink Fiber Optical Audio Switch 2x1: You can connect 2 female inputs and 1 male output. When using one device of the female inputs, you only need....
• Enjoy Excellent Sound Experience: HOSONGIN Toslink Fiber Optical Audio Splitter adopted 24k gold connector, High quality low-loss Fiber optic core and....
• Wide Application: HOSONGIN Toslink Fiber Optical Audio Splitter ideal for connecting your TV, digital TV set-top box, CD/DVD player, PS3/PS4/Xbox....
• Great Product & Perfect Service: HOSONGIN Toslink Fiber Optical Audio Splitter is solid comes no extra power is needed. Package include: 1 x HOSONGIN....

Blackmagic Design Mini Converter Optical Fiber 12G

• SDI Video Inputs: 1 x SD, HD and 12G-SDI Video and 1 x Optical Fiber Input..
• SDI Video Outputs: Automatically matches the SD, HD and 12G-SDI video input on the Optical Fiber..
• Optical Fiber Video Inputs: 1 x 10 bit SD/HD/12G- SDI switchable..
• Optical Fiber Video Outputs: Automatically matches the SD, HD and 12G-SDI video input..
• Multi Rate Support: Auto detection of SD, HD or 12G-SDI..

Fiber Optic Drop Cable Stripper for FTTH Drop Cables (Stripping Plier for Rubber-insulated Optical Cable) and CFS-3 Fiber Optic Stripper ( 3 Port Hole Fiber Optic Stripping Tool ), Fiber Tool Kit

• 【FTTH Cable Striping Plier】The blade is sharp, which can easily strip the thread. It will not damage the optical fiber core when stripping the outer cable. The blade is not exposed, and it can prevent blunt objects from colliding with the blade and causing damage to the blade. It also can prevent the blade from scratching the user. 2.4-inch scale ruler, which is clear to ensure the accuracy of the peeling length. You can choose the peeling length you need. Easy to use, increase work efficiency..
• 【FTTH Cable Striping Plier Applicability】Adaptive range: Indoor 3mm (W) * 2mm (H) optical cable.
• Adaptive optical fiber: 1/2 core optical fiber.
• Adaptive coating diameter of optical fiber: Φ0.25mm & Φ0.9.
• Adaptive cladding diameter of optical fiber: 125μm..
• 【CFS-3 Fiber Optic Stripper】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
• 【CFS-3 Stripper Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer....

MST VC Low Pass Filter Eurorack Module