Best Base Station Cb Antennas
Proxicast Pro-Grade J-Max 100% Solid Rustproof Aluminum Antenna Mount - Universal Outdoor Adjustable Pivot/Lock Bracket & J-Pipe Mast (1.5\ x 18\ Pole) for Wall, Eave, Gable, Chimney or Roof Mounting
- HEAVY DUTY ANTENNA MOUNTING KIT - SOLID 5052 ALUMINUM Bracket & Arm - 304 STAINLESS STEEL Mounting Hardware Included - Will Not Rust onto your House!.
- UNIQUE LOCKING PIN - Increases Strength and Stability for Heavy Antennas at 0, +45, -45 Degrees.
- ADJUSTABLE PIVOT / SLIDE - Position JPole for Best Signal Reception.
- Mount Base to Any Flat or Sloping Surface.
- UNIVERSAL DESIGN - Compatible With Any Type/Brand of Antenna - 4G, 5G. WiFi, TV / HDTV, Satellite, Helium, Weather Station, Ham, CB, etc..
- REVERSIBLE J PIPE - Extend Wall Standoff Distance for Antenna Mounting Flexibility.
Check StockYOTENKO SMA Male to UHF Female SO239 RF Coaxial Adapter SO-239 UHF Coax Connector Converter 50 Ohm for SDR UV5R Baofeng UHF/VHF Handy Talkie Radio HT Radio Antenna Pack of 2
- ➦CONNECTOR - UHF Female (center hole) and SMA Male (center pin) │Impedance: 50 ohm│Temp.range: -65~ +165℃(PE Cable -~ +85 ℃)│Insulation resistance: 5000MΩ..
- ➦APPLICATION - UHF Female to SMA Female Adapter/Converter. Connect Baofeng Radios to Base Station Antenna. Used widely at UHF,VHF Frequency Connect and Radio Station Antenna Convertion.
- ➦COMPATIBLE WITH -Connect UHF to SMA type device.Widely used for Baofeng UV5R UHF/VHF handy talkie radio,HT radio,SWR analyzer,SDR,Antennas, Mobile scanner,Broadcast, CB Radios, Wi-Fi, Telecom, Coaxial cable, LMR, Wireless LAN Devices, CCTV, Microwave Applications and Digital Communication System.
- ➦ADVANTAGE - Solid well made and pure brass Internal pin, gold-plates and nickel-plates shell can ensure a lower VSWR and has good oxidation resistance,low-corrosion. It is tight fit on both ends and works well to adapt from rooftop scanner antenna to RTL-SDR dongle Baofeng radios,etc.
- ➦PACKING - Pack of 2 Well Constructed SMA Male to UHF Female SO239 Connectors.
Check StockFirestik 'ORIGINAL' 5' ANTENNA (BLUE)
- [8.8inch Heavy Duty Magnetic Mount Base] Base Diameter: 90mm/3.5inch *3.
- [SO239 Antenna Connection] For CB/HF/VHF/UHF PL-259(UHF Male) mobile antennas.
- [5M(16.4ft) RG58 Coaxial Cable] Durable low loss coax cable, PL259 Plug, Compatible For most mobile Ham radios, use adapters to make it work on HT...
- [Soft rubber on magnets]The magnetic Base is composed of a magnet and rubber,Safe and durable,scratch-resistance.
- Works best on a flat metal surface, Will not work on aluminum or titanium or plastic..
Check StockMDL75785 - 40 CHANNEL PORTABLE CB
- The illuminated screen displays the current working mode of the station: the active functions (EMG, LOCK, SC, DW), the frequency band and the selected channel number, as well as the power of the received signal and the transmitted signal..
- Similar to a walkie-talkie, the CB PNI Escort HP 62 station is extremely accessible and comfortable to use due to its small size, only 73 x 35 x 92 mm - without the power adapter. Thus, you can place the station in the armrest or in the confined spaces on board any car..
- Although small in size, the PNI Escort HP 62 is equipped with most of the functions required for a CB station, thus satisfying the requirements of any user. Functions such as RF Gain, Scan, Automatic Squelch, Dual Watch or Last channel recall make the station easy to adapt to different communication needs..
- CB Radio CB PNI Escort HP 62 has a dual use: in the car as a mobile station together with the antenna mounted on the body and outside as a portable station by installing a BNC antenna and batteries (optional accessories). The connections for microphone and speaker allow the connection of a 2-pin headset with which we can communicate in handsfree mode..
Check StockSuper Antenna UM3SP SuperMount with SuperSpike Antenna Mount for MP1 ham Radio Antenna
- THIS IS: The new model UM3SP SuperMount Ground Spike Mount, a ground mount for a portable VERTICAL antenna. Designed as part of the Super Antenna MP1....
- OPERATION: Designed for field deployment of Super Antenna MP1 and other types of standard thread 3/8"-24 antennas such as HF amateur or CB mobile....
- WEIGHT: A third of a pound. 0.34 pound (500g). RADIAL TERMINALS: Two quarter-inch (6mm) male push-on quick disconnect tabs for Radials. PLATE MOUNTING....
- COMPATIBILITY: Fully compatible with all Super Antenna equipment.
- CB mobile antennas. CONNECTOR: SO-239 (PL259....
- CONTENTS: UM3 SuperMount + SP3 SuperSpike. COLOR: Natural metallic silver. RECOMMENDED ACCESSORIES: Super Antenna model MP1B antenna.
Check StockSirio Antenna P5KPL Performer 5000 PL 10m & CB Mobile Antenna
- CB & 10m mobile antennas very high power handling capability tunable from 27 to 28.5 MHz protection from static discharges.
- Type: Base loaded frequency range: 27-28.5 MHz impedance: 50 ohms & polarization: Linear vertical.
- Mounting: UHF-male (PL 259), height (approx.): 1965 mm weight (approx.): 650 gr.
Check Stock2 Sirio Fighter 5000 3/8 Trucker Antenna 18FT Dual Coax Brackets & Studs
- 2x Sirio Fighter 5000 3/8 10m & CB Mobile Antenna - Limited Edition: Max. power: 1500 Watts (CW) continuous 5000 Watts (CW) short time.
- CB & 10m Mobile antennas Very High power handling capability Tunable from 27 to 28.5 MHz Protection from static discharges DC-Ground 17/7 PH tapered....
- 1x 18 Ft RG-59A/U Co-Phase Coax Cable PL-259 TO 2 X PL-259 - Connects 2 Antennas!.
- 2x Double Groove Two Way Aluminum Mirror Mount with SO 239 to 3/8 24 adaptor (4 bolts).
- 2x Heavy Duty Surface Mount with SO 239 and Star Locking Washer.
Check StockSirio High Power 4000 PL 10m & CB Mobile Antenna
- CB & 10m Mobile antennas High power handling capability Tunable from 27 to 28.5 MHz Protection from static discharges DC-Ground 17/7 PH tapered....
- Type: base loaded Frequency range: 27 ... 28.5 MHz Impedance: 50 Ohms, Polarization: linear vertical SWR @ res. freq.: =....
- Polarization: linear vertical Bandwidth @ SWR = 2580 KHz (230 channel).
- Mounting: HI-POWER Series PL: UHF-male (PL 259).
Check StockMarketty SS-3H CB Antenna Spring, Stainless Steel Heavy Duty CB Radio Antenna Mount Spring, Spring to Fit Mobile/in-Vehicle CB Radio Antenna Mount Up to 60' Long and 3/8' X 24 Thread (Black)
- ...f people love broadcast radio when driving. In order to have a better listening experience, our SS-3H CB antenna spring is made of durable, top-grade electro-polished stainless steel, and is finished in matte black by electroplating and polishing which this antenna spring is so strong and durable.
- Design for Your CB Antennas – Our CB radio antenna mount spring installs between the mount and antenna and provides flexibility in the event that the antenna is hit or jarred. The CB antenna mount fit Mobile/in-Vehicle CB Radio Antenna Mount up to 60″ long and standard 3/8″ x 24 threads to fit Fire-stick antennas, which perfect fit for off-road vehicles, vans, trucks, RV, motorhomes, boats, and so on.
- Easy to Operate – Screw the CB antenna spring into any CB stud or mount, and then screw the antenna into the top of the disconnect. Spring can also be used with a quick disconnect.
- they’re simply stacked/screwed on top of one another. Every antenna should have a Marketty spring to protect the antenna, mount, and vehicle.
- More Antenna Spring Details – Marketty SS-3H CB antenna spring upper and lower inserts are made of chrome-plated machine brass. Each antenna spring is about 3.0″, has Excellent strength fits like a glove to a Radio Shack “twin mir....
Check StockSirio Fighter 5000 PL 10m & CB Mobile Antenna - White Color
- CB & 10m Mobile antennas Very High power handling capability Tunable from 27 to 28.5 MHz Protection from static discharges DC-Ground 17/7 PH tapered stainless steel whip Whip detachable for car-wash Suitable for magnetic mount installation.
- Type: base loaded Frequency range: 27 ... 28.5 MHz Impedance: 50 Ω Polarization: linear vertical.
- SWR @ res. freq.: ≤ 1.2 Bandwidth @ SWR ≤ 2: ≥ 2000 KHz (200 channel) Max. power: 1500 Watts (CW) continuous 5000 Watts (CW) short time.
Check StockSirio Fighter 5000 PL 10m & CB Mobile Antenna - Red Color
- CB & 10m Mobile antennas Very High power handling capability Tunable from 27 to 28.5 MHz Protection from static discharges DC-Ground 17/7 PH tapered stainless steel whip Whip detachable for car-wash Suitable for magnetic mount installation.
- Type: base loaded Frequency range: 27 ... 28.5 MHz Impedance: 50 Ω Polarization: linear vertical.
- SWR @ res. freq.: ≤ 1.2 Bandwidth @ SWR ≤ 2: ≥ 2000 KHz (200 channel) Max. power: 1500 Watts (CW) continuous 5000 Watts (CW) short time.
Check StockPride Ham Radio Operator Classic Broadcasting Microphone T-Shirt
- Still searching for Funny Ham Radio Operator designs? Make a statement with this Pride Ham Radio Operator Classic Broadcasting Microphone outfit. Makes a great gift for the ham amateur radio operator in your life who loves funny cb ham radio designs..
- This outfit is perfect for the proud ham radio operators, CB enthusiasts or amateur radio clubs or anyone who loves licensed ham radio! Wear your ham radio pride while talking on your handheld, mobile or base station! If you love broadcasting over the air..
- Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check StockUngSung Vehicle Truck BullBar Bumper Antenna Mount Bracket L Type with U Bolts Mast Clamp Accepted UHF-F, SO-239 to 3/8' x24 CB Stud, N-Female Connector for Amateur Ham, CB, Mobile Antenna
- Truck or Vehicle Bull Bar Bumper mount for any variety of antennas.
- 16.2mm diameter mounting hole accept 5/8-inch connectors such as UHF-Female, SO-239 Stud, N-Female and CB Stud 3/8"x 24T..
- Heavy Duty Stainless Steel construction : 3 mm thick, Weight: 8.64 oz.
- Fits broomstick, whip, spring mount style CB, UHF & Mobile Phone antennas. Also can be used to mount driving lights , flags , HF and Trunking radio antennas ..
- Hardware Includes 2 x U bolts, nuts and washers.
Check Stock