Categories

Best Baseboard Radiator Replacement

Fichman Furniture Unpainted Radiator Cover Kit 42 L x 28 H 9 Depth

  • Size indicates inside measurements - don't forget to account for pipes, valves and windowsills in your measurements. Actual radiator or baseboard....
  • These unpainted covers are made of specially formulated MDF which is ideal for withstanding the dramatic changes in temperature and humidity radiator....
  • Open back and 1-inch overhang on rear accommodates most quarter round, shoe molding, baseboards, or uneven flooring found in older homes.
  • Easy to assemble - all you need are a Philips ( X ) or slotted/flat head ( - ) screwdriver.
  • Always attach furniture to your walls to prevent tips - safety hardware included with this cover.
Check Stock

Fichman Furniture Unpainted Radiator Cover Kit 54 L x 28 H 9 D

  • Size indicates inside measurements - don't forget to account for pipes, valves and windowsills in your measurements. Radiator or baseboard heater....
  • These unpainted covers are made of specially formulated MDF which is ideal for withstanding the dramatic changes in temperature and humidity radiator....
  • Open back and 1-inch overhang on rear accommodates most quarter round, shoe molding, baseboards, or uneven flooring found in older homes.
  • Easy to assemble - all you need are a Philips ( X ) or slotted/flat head ( - ) screwdriver.
  • Always attach furniture to your walls to prevent tips - safety hardware included with this cover.
Check Stock

RA2000 Thermostatic Operator Built-in Sensor and Dial

  • Radiator, Convector, Baseboard Thermostatic L Valve Body Or Heating Hot Water Or Low Pressure Steam.
Check Stock

EZ Snap Covers 9 Foot Long Standard Height 7 1/2″ Baseboard Heater Cover Kit with 2 Closed End Caps

  • EZ Snap Covers are 20 gauge galvanized steel with white epoxy powder coating. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. End caps are 18 gauge thickness..
  • Our covers fit 95% of all existing hot water baseboard radiator heaters. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills..
  • Lengths over 8’ include a coupler to join the panels together. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler.
  • 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler.
  • 13’ is 1 6’ and 1 7’ and a coupler.
  • EZ Snap Covers have a lifetime warranty against rust. If they rust, send them back and we will replace them..
Check Stock

Radiator Cap, Replace 16401-31480, 1640131480 Compatible with Toyota - 4Runner Avalon Camry FJ Cruiser Highlander Sequoia Sienna Tacoma Tundra Venza Yaris, ES350 GS300 GS430 GX460 RX350 SC430, More

  • REPLACEMENT RADIATOR CAP : The radiator cap holds the coolant inside the radiator, but it also works as a two-way valve that keeps the right pressure inside so the radiator does it work correctly. If the pressure isn't maintained, the coolant can boil and evaporate, putting the engine at risk of overheating. Symptoms of a Bad Radiator Cap: air enters the system, low coolant level, coolant leaks, overflowing reservoir, overheating engine..
  • COMPATIBLE WITH TOYOTA, SCION VEHICLES : 2009-2016 4Runner | 2009-2012 Avalon | 2002-2006, 2009-2012 Camry | 2009-2014 FJ Cruiser | 2008-2013 Highlander | 2008-2017 Sequoia | 2007-2016 Sienna | 2008 Solara | 2009-2016 Tacoma | 2010-2017 Tundra | 2009-2013 Venza | 2009-2014 Yaris | 2012-2015 Scion iQ | 2009-2012 Scion xD radiator cap. Please check the detailed description before purchase. Thank you!.
  • REPLACES PART # : 16401-31480, 1640131480, 16401-46610, 1640146610 radiator cap. The radiator cap can compatible with: 2007-2012 ES350 | 2006 GS300 | 2006-2007 GS430 | 2010-2013 GX460 | 2010 HS250h | 2005 IS300 | 2005-2006 LS430 | 2007-2015 RX350 | 2010-2011 RX450h | 2005-2010 SC430. Once you have a replacement and your engine is cool, simply unscrew the old cap, and install the new by screwing it on..
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • Baseboarders Premium Series Panel only includes the replacement heater panel cover. Baseboarders Premium Series End Caps (Closed EC001-RT,LF-WHT, Open EC002-RT,LF-WHT, Zero ZC001-WHT)are sold separately. When combined with end caps the panel can span between 48”-51.5”.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electr....
Check Stock

Baseboarders Stainless Steel Heat Cover Replacements for Tall Heaters - 5 ft Panel [Accessories Not Included]

  • ✔️✔️ 5 FT PANEL: Premium replacement baseboard heater cover panel - Must purchase a Baseboarders branded accessories to properly finish installing this product. Please review installation instructions.
  • ✔️✔️ EASY DIY INSTALLATION - Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. No tools or hired help is needed..
  • ✔️✔️ PREMIUM GALVANIZED STEEL: Compared to plastic galvanized steel replacement baseboard heater covers not only last longer but will hold their beauty longer than plastic or other basic materials.
  • ✔️✔️ EXCLUSIVELY FOR TALL HEATERS: Pairing a panel and standard height products will result in products not correctly, or not fitting at all..
  • ✔️✔️ ADDITIONAL 2 INCHES OF HEIGHT: The standard baseboard heater is 6.75 inches. These tall units are 8.75 inches x 3 inches..
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • Baseboarders Elliptus Series Panel only includes the replacement heater panel cover. Baseboarders Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electri....
Check Stock

Radiator Pressure Cap, Coolant Reservoir Cap Replace RS-527, RS527, 9C3Z-8101-B, 9C3Z8101B Compatible with Ford 6.0 7.3 Powerstroke - Explorer F150 F250 F350 Mustang Taurus, Lincoln, Mercury, More

  • REPLACEMENT RADIATOR PRESSURE CAP : The radiator cap holds the coolant inside the radiator, but it also works as a two-way valve that keeps the right pressure inside so the radiator does it work correctly. If the pressure isn't maintained, the coolant can boil and evaporate, putting the engine at risk of overheating. Symptoms of a Bad Radiator Cap: air enters the system, low coolant level, coolant leaks, overflowing reservoir, overheating engine..
  • COMPATIBLE WITH FORD VEHICLES : 1992-2011 Crown Victoria | 2003-2014 Ford E150, E250 | 2007-2014 Edge | 2000-2005 Excursion | 1997-2013, 2015-2017 Expedition | 2002-2005, 2011-2019 Explorer | 1997-2017 F150 | 1997-1999 F250 | 1999-2016 F250 Super Duty | 1997 F350 | 1999-2017 F350 Super Duty | 2009-2019 Flex | 2006-2013 Fusion | 1996-2014 Mustang | 2013-2019 Police Interceptor | 2001-2011 Ranger | 1996-2019 Taurus | 1994-1997, 2002-2005 Thunderbird | 1999-2003 Windstar radiator cap..
  • REPLACES PART # : RS-527, 9C3Z-8101-B, RS527, 9C3Z8101B radiator cap. The radiator cap can compatible with Lincoln, Mercury : 2003-2005 Aviator | 1995-2002 Continental | 2000-2006 LS | 2009-2016 MKS | 2010-2019 MKT | 2007-2017 MKX | 2007-2....
Check Stock

DWVO Radiator Compatible with Chevy GMC Suburban Yukon Tahoe Pickup Escalade C1500 C2500 C3500 K1500 K2500 K3500 5.0L 5.7L V8 DWRD1018

  • DIRECT OEM FIT - Replacement Radiator Compatible with Chevy GMC Suburban Yukon Tahoe Pickup Escalade C1500 C2500 C3500 K1500 K2500 K3500 5.0L 5.7L V8.
  • THE RIGHT CHOICE - OEM part number 89019344. Replacement number 52481442, 52481443, 52470421, 52467218, 52469467, 52469470, 52469673, 52477782, 52481440, 52491626, 89019179. This OEM replacement radiator with 12 months, 12,000 miles warranty..
  • AFFORDABLE, RELIABLE & BUILT to LAST - This OEM design complete radiator is built with high density multi-louvered fins for maximum cooling efficiency, to ensure durability in extreme cold weather, 100% no leaks..
  • PREMIUM QUALITY for INSTALLATION – The aluminum radiator core built with TIG-welded end PA66 GF30 inlet/outlet tanks, brass transmission oil cooler and treated coating is applied to prevent corrosion and ensure product longevity..
  • ENHANCED PACKAGE - Package come with 1x DWVO Complete Radiator and 1x User Manual (WITHOUT RADIATOR CAP. A/T RADIATOR,ALSO FIT MANUAL ) . Fixed foam in four corners for the purpose of fixing the radiator, no bending and no damage. Professional installation would be highly recommended.
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • ...eries panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (6 ft, Cover + L&R End Caps)

  • ...eries panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (3 ft, Cover + L & R End Caps)

  • ...eries panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock