Categories

Best Baseboard Vent Cover

Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (3 ft, Cover + L & R End Caps)

  • Baseboarders Premium Series Set includes one panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboar....
Check Stock

Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System & R3203612 12' Extension Kit for LintEater RLE202 Dryer Vent Cleaning System, White

  • Most valuable tool you can own to ensure the safe operation of your clothes dryer.
  • Reduce drying times and save money on utility bills while ensuring the safety of your home.
  • Easy to use with your cordless drill and provides a means for regular cleaning of your dyer vent system.
  • Included adapters enable you to use the air from the clothes dryer, shop vacuum or electric blower to completely remove lint from the vent while rotary cleaning at the same time.
  • Effectively removes dangerous lint buildup in almost every type of dryer vent, eliminating a leading cause of house fires.
  • Rotating action of the auger brush and flexible rods scours your entire vent wall surface while traversing the multiple turns that are common in most dryer vent systems.
  • Exceptional reach also makes it a snap to clean behind, underneath and all around your dryer, appliances, baseboard heating vents and other hard-to-reach areas.
  • Increases Reach of the LintEater (RLE202) and LintEater Jr. (RJR601) Rotary Dryer Vent Cleaning Systems.
  • Clean from One Side of the Dryer Vent, Either Inside or Outside.
  • Multiple Extensions Can Be Combined to Easily Clean Longer Vent Runs.
  • Includes: 4 Qty. 3’-Long Flexible Screw-Connect Rods.
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • Baseboarders Premium Series Panel only includes the replacement heater panel cover. Baseboarders Premium Series End Caps (Closed EC001-RT,LF-WHT, Open EC002-RT,LF-WHT, Zero ZC001-WHT)are sold separately. When combined with end caps the panel can span between 48”-51.5”.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electr....
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • Baseboarders Elliptus Series Panel only includes the replacement heater panel cover. Baseboarders Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electri....
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • Baseboarders Basic Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you..
  • Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will bec....
Check Stock

Baseboarders Stainless Steel Heat Cover Replacements for Tall Heaters - 5 ft Panel [Accessories Not Included]

  • ✔️✔️ 5 FT PANEL: Premium replacement baseboard heater cover panel - Must purchase a Baseboarders branded accessories to properly finish installing this product. Please review installation instructions.
  • ✔️✔️ EASY DIY INSTALLATION - Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. No tools or hired help is needed..
  • ✔️✔️ PREMIUM GALVANIZED STEEL: Compared to plastic galvanized steel replacement baseboard heater covers not only last longer but will hold their beauty longer than plastic or other basic materials.
  • ✔️✔️ EXCLUSIVELY FOR TALL HEATERS: Pairing a panel and standard height products will result in products not correctly, or not fitting at all..
  • ✔️✔️ ADDITIONAL 2 INCHES OF HEIGHT: The standard baseboard heater is 6.75 inches. These tall units are 8.75 inches x 3 inches..
Check Stock

Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System, Removes Lint & Extends Up to 12’ with 4 Flexible 3' Rods, White ,Grey, Black

  • Most valuable tool you can own to ensure the safe operation of your clothes dryer.
  • Reduce drying times and save money on utility bills while ensuring the safety of your home.
  • Easy to use with your cordless drill and provides a means for regular cleaning of your dyer vent system.
  • Included adapters enable you to use the air from the clothes dryer, shop vacuum or electric blower to completely remove lint from the vent while rotary cleaning at the same time.
  • Effectively removes dangerous lint buildup in almost every type of dryer vent, eliminating a leading cause of house fires.
  • Rotating action of the auger brush and flexible rods scours your entire vent wall surface while traversing the multiple turns that are common in most dryer vent systems.
  • Exceptional reach also makes it a snap to clean behind, underneath and all around your dryer, appliances, baseboard heating vents and other hard-to-reach areas.
  • Includes: 4 Qty. 3’-Long Flexible Screw-Connect Rods.
Check Stock

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Coupler)

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only..
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric ....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • Baseboarders Premium Series Zero Clearance caps are symmetrical, there are no left or right sides. Used when the original back plate terminates within ½” of adjacent wall. Designed to snap onto the ends of Premium Baseboarders.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • Baseboarders Premium Series Closed End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that bend down into the floor or back into the wall. They do not continue into an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard hea....
Check Stock

Sunshane 2 Pack 4 Inch Dryer Vent Grill Bird Guard Insert Stop Birds Nesting in Bathroom Exhaust Vent and Dryer Vent

  • Proper size: the dryer vent grill is approx. 4 x 4 x 0.03 inches, fits for most standard 4 inches louvered vent cover, no need to measure and cut for your convenience.
  • Durable material: the dryer vent cover is made of high quality aluminum alloy, cuttable and durable, waterproof and rust proof, you can use it for a long time.
  • Easy to use: the vent cover adopts simple and convenient design, suitable for louver vent hood cover guard, no specialized tools or professional assistance required, easy to install in a few minutes.
  • Wide application: the vent cover is widely used to help your dryer vent isolation from birds, mice, snakes and other pests, fits for bathroom exhaust vent and dryer vent, beautiful detail to compliment any home.
  • Package includes: you will get 2 pieces of dryer vent grills, silver color, great for louver vent hood cover guard. Note: the plastic louvered vent cover is not included.
Check Stock