Categories

Best Basement Drain Plug

Abestorm Crawl Space Dehumidifier, 120Pint Commercial Dehumidifiers for Basement, Industrial Dehumidifier with Drain Hose, Portable Whole House Dehumidifier Crawlspace, Auto Defrosting, ETL Listed, 5 Years Warranty

  • ✔ 【Saving More Energy & Cost Less】: Quicker and more effective. This energy saving dehumidifier removes moisture with less energy than other conventional dehumidifiers, without increasing the energy bill, is a great helper in saving energy and your money, and will be the best dehumidifier for your basement/crawlspaces/large room/garage/attic. It can remove 55 pints of water per day at AHAM(80°F, 60%) condition, 120 pints at saturation, covers an area of 1300 sq. ft dehumidification..
  • ✔ 【Ideal for WholeHouse, Crawlspace, Commercial Dehumidification】: Abestorm Guardian SN55 Dehumidifiers for Crawlspace, Basement & Commercial. Equipped with Auto Defrosting system and optional remote control system, enable this dehumidifier with drain hose works well at a low-temp (36°F) situation. It is not only a crawlspace/basement dehumidifier for home, but also is the best dehumidifier for commercial/industrial applications..
  • ✔ 【Internal Corrosion Protection】: Freon Leakage - a fatal flaw for dehumidifiers. To avoid this, Abestorm Dehumidifiers adopts Rare Earth Alloy Tube Evaporator and Internal Corrosion Protection advanced technology, maintaining the coil’s heat transferability, minimizes regular coils get corrosion and freon leakage quickly, ....
Check Stock

2 Pack Drain Plugs for RTIC Coolers, Large & Small Cooler Drain Plugs Compatible with RTIC 20QT, 45QT, 65QT Coolers with New Two Drains

  • Compatible with -- RTIC replacement plugs used in the "Dual Drain Plug System". The large & small cooler drain plugs fit for RTIC 20QT, 45QT, 65QT new coolers with 2 drainage holes..
  • Good Design -- The screw-in gasket drain plug improved finger knob design which are easy to open and close to drain your cooler water. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
  • Easy to Use -- These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
  • Package Included -- The cooler drain plug kit include 1pc large screw-in gasket cooler drain plug replacement for RTIC coolers and 1pc small cooler drain plug with leak-proof design replacement for RTIC 20QT, 45QT, 65QT Coolers..
  • Satisfaction Guarantee -- We care for all customer's feeling. If this product does not meet your expectations, please send it back for a 100% refund or contact us directly....
Check Stock

Abestorm Crawl Space Dehumidifier with Pump, 120 Pint Commercial Dehumidifier with Drain Hose for Basement, Whole Home, Humidity Control, Auto Defrosting, Auto Shut Off/Restart, 5 Year Warranty

  • ...awl space dehumidifier can quickly and efficiently remove 120 pints per day of moisture from the air with less energy than other conventional dehumidifiers, without increasing the energy bill, is a great helper in saving energy and your money. It is suitable for large spaces up to 1,300 sq ft, such as crawl spaces, basements, storage areas, garage, whole home or commercial use..
  • 【Two Methods for Drainage】This commercial dehumidifier with pump provide two drain hose. You can choose gravity drain or pump drain with the working environment. Built-in Condensate Pump: Lift distance 19.6ft. You can feel free to drain water anywhere. . Gravity Drainage: Simply attach the drain hose to this basement dehumidifier to drain the condensation automatically and continuously by gravity..
  • 【Sturdy Construction - Internal Corrosion Protection】To extend the life of crawlspace dehumidifiers, Abestorm Dehumidifiers adopts Rare Earth Alloy Tube Evaporator and Internal Corrosion Protection advanced technology, maintaining the coil’s heat transferability, minimizing regular coils get corrosion and freon leakage. The durable dehumidifier is made of a metal outer casing that withstands more rugged conditions, ensuring long-term use and easy maintenance..
Check Stock

YETI and RTIC Compatible Large & Small Drain Plug Combo Pack - Compatible Replacement Plugs for RTIC's and Yeti's New 2 Drain Coolers - Yeti Cooler Accessories

  • Compatibility: The RTIC Compatible Large & Small Drain Plug Combo Pack Is An Improved Design That Fits Specifically With the RTICs New 2 Drain Coolers..
  • Package Contains: Yeti bucket accessories has the package which includes Both RTIC Replacement Plugs Used in the “Dual Drain Plug System” – One Small Plug and One Large Plug..
  • Perfect Size: Yeti cooler plug and RTIC cooler plug has an Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining. Yeti stopper helps to stop the water and easy to drain..
  • Good Replacement: The Yeti Accessories Beast Cooler Dual yeti cooler drain plug Kit Contains Both the Large and Small Drain Plugs Specifically Made to Be Compatible With the RTIC Coolers With Dual Drain Valve System..
  • Easy to Use: Yeti Drain hose or yeti drain plug has a Standard Sized Drain Plug on the Other Side With an Integrated Vacuum Relief Valve for Easier Opening of the Cooler Lid When the Plug Is Pressed..
Check Stock

ZRM&E Plastic Cooler Drain Plug Leak-Proof Accessories for RTIC Coolers and YETI Coolers, Blue

  • The plug used in the lower part of the RTIC of the drain cooler has improved the radiator designed for the drain cooler. These can be used as replacements for drain plugs, all hard coolers of RTIC..
  • Replacement drain plug, suitable for RTIC cooler, improved finger knob design makes it easier for fingers to open and close the drain pipe..
  • Easy to flow, the sturdy drain plug allows your refrigerator to drain when it is partially opened..
  • The drain plug adopts a leak-proof design, which perfectly replaces the old or damaged cooler drain plug..
  • The replacement drain plug is made of durable material, easy to flow and strong..
Check Stock

ZRM&E Plastic Cooler Drain Plug Leak-Proof Accessories for RTIC Coolers and YETI Coolers, Red

  • The plug used in the lower part of the RTIC of the drain cooler has improved the radiator designed for the drain cooler. These can be used as replacements for drain plugs, all hard coolers of RTIC..
  • Replacement drain plug, suitable for RTIC cooler, improved finger knob design makes it easier for fingers to open and close the drain pipe..
  • Easy to flow, the sturdy drain plug allows your refrigerator to drain when it is partially opened..
  • The drain plug adopts a leak-proof design, which perfectly replaces the old or damaged cooler drain plug..
  • The replacement drain plug is made of durable material, easy to flow and strong..
Check Stock

2 Pack Cooler Drain Plug for Yeti Cooler Plug Replacement Accessories for Yeti, Cooler Wheels Compatible with Most Rotomolded Coolers Including Most Major Brands Drain Plugs with Leak-Proof Design

  • 【Compatibility】Drain Plugs for Yeti Are An Ergonomically Improved Twist Drain Plug, Is An Improved Design That Specifically Fits With Cooler Plug with Yeti Line of Roadie, Tundra, and TANK Ice Buckets and RTIC coolers (This is Non-Original Aftermarket Parts).
  • 【Perfect Size】This package contains 2 Pack high visibility cooler drain plugs, and each size is approx. 4.57cm/ 1.8 inch in length and approx. 2.79 cm/ 1.1 inch in width, An Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining..
  • 【Easy to Use】Screws right in, seals tight without any leaking issues. Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
  • 【High Quality Material】Cooler Plug Replacement for Yeti with Premium Quality, The drain plug is made of 2 parts, the collar is made of silicone, and the plug is made of quality ABS plastic, which is very strong and leak-proof, and can be applied for a long time..
Check Stock

AIEVE Drain Plug Hose Connection for YETI Cooler, Cooler Drain Plug Replacement for YETI, Cooler Plug Replacement for YETI Chest, Cooler Accessories for YETI Tundra Cooler, Roadie Cooler, Tank Cooler

  • AIEVE cooler drain plugs for yeti cooloer with leak-proof design replace your old or broken cooler drain plugs perfectly, use with most standard hoses to drain your YETI coolers easily, allows you to drain your YETI Cooler with a garden hose without removing it.
  • This cooler drain plug replacement for YETI coolers is easy to open and close to drain your cooler water, durable and provides a secure connection for easy draining, no long need to pull cooler out your truck to drain water, effective and ice melts eventually.
  • Cooler plug replacement for yeti cooler fit most standard hoses to drain the cooler water easily while drain plug is partially open, garden hose drain plug connector for coolers, connect a standard garden hose, and drain all the way down at the end of the driveway, instead of pooling a big old puddle of cold water into your garage.
  • Tighten the replacement cooler plug and keep your YETI Tundra coolers cold, when not in use, simply attach the provided cap as a leak-proof plug and drain your YETI coolers easily without lifting a finger, no need to drag the ice chest to the end of the tailgate to drain and the wat....
Check Stock

[OEM Products] BENEDETTO Auto Service 10 PCS Oil Drain Plug gaskets/Crush washers Replacement for Toyota Drain Plug Washer Replaces# 90430-12031 Aluminum (QTY10)

  • Toyota oil drain plug gasket Part Number: 90430-12031, 9043012031, , 90430-A0006, 90430-C0005, for Dorman 095-156, 095-156CD, and 65394.
  • 90430-12031, oil drain plug gasket: Fits Lexus Scion Toyota CT200h ES350 Prius Tundra Sienna Corolla 4Runner Highlander Camry Tacoma RAV4 Scion tC xB xD Oil Drain Plug Washers..
  • Specification: Thickness: 0.07inch, Inside diameter: 0.48 inch, Outside diameter: 0.82 inch.
  • Easy to install and High-Quality Material and Performance Aluminum toyota oil drain plug gasket.
  • 90430-12031 Oil Drain Plug Gaskets is a ring-shaped part that keep the drain plug tight and free from leaks and helps to seal the drain plug and oil pan surfaces. When it's time to change your Toyota's oil and oil filter, it may also be time to replace the drain plug gasket. Prevent oil leaks with "crush" gaskets.
  • 10 Year Warranty: If these toyota oil drain plug gaskets damaged, please feel free to contact us for reship or refund..
Check Stock

Honoson 2 Pieces Cooler Plug Replacement Parts Cooler Accessories Kit Compatible with Most Rotomolded Coolers Including Most Major Brands Drain Plug in Leak-Proof Design(Orange)

  • Kit includes: this package contains 2 pieces high visibility cooler drain plugs, and each size is approx. 4.57cm/ 1.8 inch in length and approx. 2.73 cm/ 1.07 inch in width, please confirm the size of your item before purchasing.
  • Practical design: the drain plugs adopt finger knob design, which allow the finger lever to open and close the drain more easily.
  • This is designed to drain when partially opened without having to completely remove the plug.
  • Flexible and easy to use: the larger finger knob makes it easier to grasp to open or close the drain.
  • When installing, just tighten the drain plug of the cooler to help keep the cooler cool.
  • When draining, just unscrew drain plug, pull it out, then tilt the cooler and drain the water.
  • Quality materials: the drain plug is made of 2 parts, the collar is made of silicone, and the plug is made of quality ABS plastic, which is very strong and leak-proof, and can be applied for a long time.
  • Wide Compatibility: the drain plug is compatible with most rotomolded coolers, compatible with Tundra coolers, and TANK Ice Buckets and RTIC coolers,....
Check Stock

12 Packs 90430-12031 Toyota Oil Drain Plug Gaskets Compatible with Toyota Tacoma Tundra Camry Corolla 4Runner Scion Avalon Lexus Oil Plug Gasket (12) (12) (12)

  • Part Number: Replaces 90430-1203, 9043012031 Inside diameter: 0.48 inch, Outside diameter: 0.82 inch, Thickness: 0.07inch.
  • Direct replacement: Used for oil drain plug on Scion Lexus Toyota Crush Washer Seals.
  • Trustworthy quality: The toyota oil drain plug gasket fits the oil drain plug perfectly and works well to keep the drain plug tight and free from leaks, easy to replace old broken toyota drain plug gasket with this exact copy..
  • The oil drain plug gasket located at the bottom of the oil pan helps keep oil from leaking around the oil drain plug. These gaskets are usually a single-use item and should be replaced with each oil change..
  • 20 Year Warranty: If have any quality issue, we would like to issue refund or arrange reshipment within 20 years. Excellent service and superior lexus drain plug gasket toyota.
Check Stock

Drain Plugs Replacement for RTIC Coolers,Compatible with RTIC 20QT 45QT 65QT with New 2 Drains Coolers Large & Small 2 Pack

  • COMPATIBILITY: The RTIC Compatible Large & Small Drain Plug Combo Pack Is An Improved Design That Fits Specifically With the RTICs New 2 Drain....
  • PACKAGE CONTAINS: This Package Includes Both RTIC Replacement Plugs Used in the “Dual Drain Plug System” – One Small Plug and One Large Plug..
  • PERFECT SIZE: An Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining..
  • GOOD REPLACEMENT: The Beast Cooler Dual Drain Plug Kit Contains Both the Large and Small Drain Plugs Specifically Made to Be Compatible With the RTIC....
  • EASY TO USE: Drains Easily and Has a Standard Sized Drain Plug on the Other Side With an Integrated Vacuum Relief Valve for Easier Opening of the....
Check Stock

TENSPAL Kayak Drain Plug Kit Hull Coarse Thread Bung for Canoe Boat Set with Screws Replacement Hardware Accessories 2 PCs

  • ✔ 【PRACTICAL PRODUCT】- This Kayak Drain Plug Kit fits all kinds of canoeing, canoe, ship drain plug. Stops water infiltration and it is used to....
  • ✔【EASY TO USE】- Just install this kayak drain plug kit to the kayak boat, there are rubber gasket on each plug protect hull from damage..
  • ✔ 【PACKAGED】- This kayak drain plug kit packaging included 4 coarse thread kayak drain plug kit with 8 stainless steel screws..
  • ✔ 【SIZE FOR YOU】- Kayak drain plug kit press board size: Approx. 2.2*1.2 inches (5.6*3.1cm) , Outside diameter of scupper plug: Approx. 1 inch....
  • ✔【100% SATISFACTION GUARANTEE】- We promise 100% satisfaction guarantee and 60 days Money Back Services. Tips: Please confirm the size is....
Check Stock