Tub Drain Remover & Basin Wrench, Dual Ended Ratchet Wrench Use to Install and Remove Most Bath and Shower Drains and Closet Spuds Square Plastic Toilet Seat Nuts
- Easy operation: use to install and remove most Basin, bath and shower drains and closet spuds. Can be used alone or with adjustable wrench Or use with screwdrivers inserted into one of two holes for the best torque, much easier.
- Heavy-duty die-cast aluminum,Constructed from aluminum, lightweight Remover Tub drains, The lightweight material characteristics of aluminum alloy, even if the wrench is accidentally dropped to the basin or bathtub, it will not easily scratch scratch the bathtub or basin (This point is very important).
- Dumbell wrench & Ratchet Wrench: It is shaped like a hammer and has a large head. We have thickened and Weight increase, You can use it like a hammer for simple fixed percussion(Caution!! Don't knock on materials with hardness higher than aluminum).
- Function increase: extension from either end. Will also remove or install 3/8” or 1/2” etc plastic toilet seat nuts. Dual Ended Drain Wrench.
- OUR COMMITMENT: We take pride in delivering a quality product. If within 30 days, you are unhappy for any reason, We will give a full refund..
Check StockHAUTMEC Tub Drain Remover Wrench PL0030
- Dual-sided wrench, use to install and remove most bath and shower drains and closet spuds.
- Use with an adjustable wrench ,Hautmec basin wrench pl0024 or screwdrivers inserted into one of two holes for the best torque.
- Heavy-duty die-cast aluminum, lightweight.
- Each side is different size, fit for most drain.
- Barbell tub drain removal wrench,bathtub drain extraction tool,basket strainer wrench,bathtub drain remover,sink strainer wrench,faucet wrench.
Check StockGeneral Tools Telescoping Basin Wrench Large Jaw #140XL Extends from 11 to 16-Inches Fits 1 to 2 Inch
- TELESCOPING: Long-reach telescoping shaft of this basin wrench adjusts quickly from 11 inches to 16 inches..
- PIVOTING JAW: Large pivoting jaws fit 1 inch to 2 inch nuts and feed lines on kitchen and bathroom faucets..
- RATCHETING: Faucet wrench has spring loaded jaws for one-hand ratcheting in hard to reach areas..
- DURABLE: Basin wrench has hardened forged steel jaws for superior wear and are plated to prevent rust while working in damp and wet environments..
- FLEXIBLE: Sliding T-handle offers added leverage and helps avoid contact with the wall or pipes..
Check Stock
Refrigeration Ratchet Wrench 4 Different Sizes - 1/4 x 3/16 Square x 3/8 x 5/16 Square Air Conditioning Ratcheting Service Wrench
- Easy operation: Can be used alone or with adjustable wrench Or use with screwdrivers inserted into one of two holes for the best torque, much easier, Dual Ended Drain Wrench that fits 3/8 or 1/2 Inch Ratchet Wrench.
- Heavy-duty die-cast aluminum,Constructed from aluminum,lightweight Remover Tub drains, The lightweight material characteristics of aluminum alloy, even if the wrench is accidentally dropped to the basin or bathtub, it will not easily scratch scratch the bathtub or basin (This point is very important).
- Dumbell wrench:It is shaped like a hammer and has a large head. We have thickened and Weight increase, You can use it like a hammer for simple fixed percussion(Caution!! Don't knock on materials with hardness higher than aluminum)..
- Function increase: extension from either end. Will also remove or install 3/8” or ½”square plastic toilet seat nuts..
- OUR COMMITMENT: We take pride in delivering a quality product. If within 30 days, you are unhappy for any reason, We will give a full refund..
Check Stock
86PC Tap and Die Set Combination Metric Tap and and Die Set Tungsten Steel Titanium SAE and Metric Tool
- Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
- Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
- Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
- Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
- Sae And Metric Included: This tap and die set comes with 86 pieces in total: 39 pcs taps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock
Baizongyang Universal Adjustable Double-ended Wrench Multifunctional Bathroom Wrench for Disassembly & Assembly Valves/Faucets/Connecting Pipes/Shower Heads
- 【Three Size Chucks】The tool set includes three different sizes of chucks, 3.5cm, 4.5cm hexagonal chucks, and multi-functional round chucks. Three sizes of chuck can be installed on the end of the basin wrench, which can be used for different types of sink fittings..
- 【Ergonomic】The wrench ergonomic short handle design makes you feel comfortable while using it, and the handle has a perfectly sized grip, allowing your hand to hold tightly without slipping, and it is also convenient to use in tight spaces..
- 【Large Opening Design】The tooth shape and canine tooth design are more suitable for the shape of the sink wrench, with built-in spring, the opening size can be adjusted arbitrarily. The opening range can be adjusted between 56 - 80mm, suitable for a variety of environments requiring wrench operation..
- 【Durable Material】The bathroom wrench is made of aluminum alloy and ABS. Offers high hardness, impact resistance and durability. With higher precision, higher flexibility and higher efficiency. Comes with a storage box for easy storage and long-term use..
Check Stock
Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads
- Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
- Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
- Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
- Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
- Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock2 Set 8-in-1 Faucet and Sink Installer Faucet Tool Sink Wrench Change Faucet Tool for Kitchen Multifunctional Plumbing Under Sink Wrench Basket Strainer Wrench for Toilet Bowl Sink Bathroom
- 【2SET SINK FAUCET WRENCH】Package include: 2Sets basin sink tools with 4 replaceable wrench heads (The inner diameter of the replacement head is....
- 【THREE-DIMENSIONAL STRUCTURE】Faucet socket wrench is made of high-strength engineering plastic construction and durable aluminum alloy.
- 【EXTRA-LONG DESIGN】Water pipe spanner uses open slot and extra-long design, make it more convenient to turn faucets, sprayers and nuts..
- 【MULTI-PURPOSE】The plumbing strainer basket wrench are suitable for supply nuts, shut off valves, strainer baskets, supply line nut,faucet nuts..
- 【SUGGESTION】We recommend that you read the precautions and instructions on the package when you purchase them, it can help you understand and use....
Check StockHappybuy 86PC Tap and Die Set Combination Metric Tap and Die Sae Tap and Die Set Tungsten Steel Titanium SAE and Metric Tool (86PC Tap and Die)
- Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
- Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
- Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
- Adjustable Tap Wrench: Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
- Most Popular Sizes Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check StockDURATECH 11-Inch Basin Wrench Sink Wrench Adjustable 3/8 to 1-1/4 Capacity Jaw for Tight Space
- Featuring a forged and hardened jaw with an optimized tooth pattern, the DURATECH Basin Wrench provides maximum grip and durability..
- The 11-inch basin wrench features a spring-loaded auto-adjusting jaw for one-handed operation in narrow places, suitable for faucets, supply lines,....
- The 180 pivoting head holds its position at any angle to access hard-to-reach nuts. It features a spring-loaded jaw that securely grips and easily....
- The strong solid-steel shaft provides a 11in reach and is slim enough to slip past pipes and drain lines into tight spaces. A sliding "T" bar handle....
- Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check StockPlumbers Wrench 6-75mm Large Opening Sink Wrench Plumbing Wrench for Tight Spaces Toilet Basin Sink Drain Faucet Nut Disassembly Plumbing Tools for Professional Plumber
- ➤【Large Opening Plumbers Wrench】- Large opening design, The jaw can be adjusted freely in the range of 6-75mm, so that the contact area between....
- ➤【Plumbing Wrench for Tight Spaces】- Plumbing under sink wrench suitable for different environments, with a non-slip short handle to ensure....
- ➤【Plumbing Tools for Professional Plumber】- Suitable for many occasions such as toilet, basin, plumbing pipe, sink drain, faucet, nut....
- ➤【Aluminum Alloy Material】- The plumbers sink wrench is made of aluminum alloy with good toughness and high torque. Great for light duty works.....
- ➤【Coming with Blades and Screw Nuts】- Coming with 2 blades and 2 screw nuts, the blade can be installed on the wrench, can be use to cleaning....
Check Stock
ZMURED Tap Wrench Universal Adjustable Double Ended Wrench Set，Locking Adjustable Wrench for Plumbers, Faucet and Sink Wrench Installation Hand Tools
- Unique Design: The tap wrench design is more suitable for the disassembly of special pipes in the sink, the peripheral tooth is not easy to slip, and the disassembly is easier. The design of the slot at the end increases the use function..
- Advanced Material: The wrench is made of aluminum, which is light and durable, and has strong functions..
- Multifunctional Wrench Cool Tools for Men: Not only suitable for bathroom wrench, the water inlet pipe under the basin, the sink and other narrow spaces can be easily operated, solving the difficulty of small space and screwing..
- Locking Adjustable Wrench : With 3 water pipe clamps including water pipe clamps, 3.5cm six-sided clamps, 4.0cm six-sided clamps and multi-functional round clamps, which can be installed to the tail. The function clamps are specially designed for sink screws Designed for disassembly..
- Adjustable Double-Ended Wrench: One end is designed with a large opening, which can be adjusted up to 80mm, with higher precision, higher flexibility and higher efficiency..
Check StockFaucet and Sink Wrench,Multifunctional Faucet Wrench Tool,Basin Wrench Plumbing Tools with Gradienter,Double Head Sink Installer Tool Water Pipe Spanner Tackle For Plumbers And Homeowners
- 【MULTI-PURPOSE WRENCH】Most suitable for supply nuts, shut off valves, strainer baskets, supply line nut, faucet nuts.This wrench can also turn....
- 【LABOR SAVING DESIGN】 With a rod being inserted in the tail hold, this basin wrench for common faucet installations and sink strainers can easily....
- 【EASY TO USE】Faucet wrench allow you to complete removal and installation in minutes. This faucet tool is not only a wrench but also a spirit....
- 【GOOD QUALITY】Features a lightweight but high strength plastic construction and durable aluminum alloy. Two inserts is very easy to disassemble,....
- 【OPEN SLOT STYLE】Allows for easy access over existing supply lines.Simply snap the right position and rotate quickly.This faucet tool especially....
Check Stock
