XMSJSIY Amplifier Bass Knob Volume Remote Controller Car Audio Adjustable Bass Controller with 4 Pin Extension Cable for Subwoofer - 4M/13.1FT Cable
- Works With All Skar Audio SKv1 Monoblock Amplifiers.
- Also Compatible With Other Amplifiers That Accept A 6-Pin Bass Knob and Cable.
Check StockBOSS Audio Systems MODEL R1600M Car Amplifier - Model 1600W High Output Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great Amp for Subwoofers
- POWER: 1600 Watts Max x 1 @2-Ohms, 800 Watts Max x 1 @4-Ohms.
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
- MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock
Alpine MRV-M500 Amplifier and a Kicker Dual Comp 12-inch Subs in Vented Ported Enclosure and a 2-Ohm - Includes wire kit
- The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands..
- V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space..
- With a stout custom box design and a pair of 12-inch KICKER Comp subs, this new enclosure doles out giant amounts of bass..
- This package also includes a 4-gauge wiring kit with full copper wiring and 2-channel RCAs..
Check StockRockford PEQ Punch Equalization Remote for 2007 up Amps
- Remote wired bass/treble boost, For use with select 2007 and newer PUNCH and POWER amplifiers..
- Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP).
- Includes bass knob, cable, mounting clip, mounting screws.
Check StockSony RM-X151 Car Stereo Remote -Electronics
- Xtenzi Brand Remote Amplifier Level Controller Optional bass remote XTBR6-91561.
- Optional Wired Remote Volume Control Compatible with Select XThunder Link Amp..
- Controls the bass/gain from the front seat or remote location from amplifiers,.
- Allows You to Adjust Your Bass Level Quickly and in the Most Ideal Location,.
- High Quality Product Remote Unit Comes with 5-meter (196 inch) remote connection wire and bass knob..
Check StockSound Storm Laboratories CG1202 2 Channel Car Amplifier - 1200 Watts Full Range Class A/B 2/4 Ohm Stable Mosfet Power Supply Bridgeable
- Power - 600 Watts Max x 2 @2-Ohms 300 Watts Max x 2 @4-Ohms 1200 Watts Max x 1 Bridged @4 Ohms.
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
- Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers.
- Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
Check Stock
Pump Boys and Dinettes
- Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
- Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
- Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
- Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
- Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Onli....
Check StockKickers Girls Sidekick T Flats Shoes Black 5
- KICKER 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps, Bass Remote Controller.
- For Select KICKER CXA, CX and PXA Series Amplifiers, Surface Mount installation.
- Dimension (L x W x H): 4.75 inch x 3.5 inch x 1.25 inch.
Check StockKICKER 46CXARCT Wired Remote Bass Controller for Select Amplifiers
- KICKER 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps, Bass Remote Controller.
- For Select KICKER CXA, CX and PXA Series Amplifiers, Surface Mount installation.
- Dimension (L x W x H): 4.75 inch x 3.5 inch x 1.25 inch.
Check Stock
BOSS Audio Systems AR2000M Monoblock Car Amplifier - 2000 Watts, 2-4 Ohm Stable, Class A-B, Mosfet Power Supply, Gray
- Power - 2000 watts Max X 1 @2-ohms, 1000 watts Max X 1 @4-ohms.
- Class A/B topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
- Low/high level inputs - a low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
- Variable low-pass Crossover - subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- Variable bass Boost - bass Boost allows you to adjust the low bass within the boost Range to just the way you like it.
- Variable gain control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
- Dimensions - 13.13 x 6.5 x 2.8, weight - 3.81 lbs. It can be installed in a variety of different places due to its slim and Compact design.
- Warranty - BOSS Audio provides a powerful 6-year platinum online dealer warranty so long as the purchase is made through Amazon.Com. We strongly encourage professio....
Check Stock
BOSS Audio Systems Elite BE2500.1 Monoblock Car Amplifier - 2500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers
- POWER: 2500 Watts Max x 1 @2-Ohms, 1250 Watts Max x 1 @4-Ohms.
- CLASS A/B TOPOLOGY: Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
- DIMENSIONS: The BE2500. 1 is 10 inches in Depth, 7 inches in Width and 2. 3 inches in Height. It weighs 4. 5 lbs..
- : BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation o....
Check StockXtenzi Replacement Remote Knob Compatible with Image Dynamics Q Series Amplifier
- Optional Remote Amplifier Level Bass Controller remote XTBR4-KI.
- Controls the bass/gain from the front seat or remote location from amplifiers,Allows You To Adjust Your Bass Level Quickly and in the Most Ideal....
- Allows You To Adjust Your Bass Level Quickly and in the Most Ideal Location,High Quality Product Remote Unit Comes with 18' remote connection wire and....
- Compatible with 10ZX300.1,10ZX400.1,10ZX500.1,10ZX750.1,10ZX1000.1,10ZX1500.1.
- Also Compatible with 10ZX2500.1 ,10ZX450.2 ,10ZX650.4,10ZX700.5.
Check StockRockford Fosgate PEQ-Remote Punch EQ Wired Remote Bass and Treble Knob EQ for 2007+ Punch Amps (4 Pack)
- 4-PACK: Rockford Fosgate PEQ Remote Bass and Treble Knob with remote wired bass and treble boost.
- COMPATIBILITY: Designed for 2007 and newer compatible amplifiers.
- BASS BOOST: 0dB to +18dB bass boost @ 45Hz..
- TREBLE BOOST: 0dB to +12dB treble boost with hinge filter between 1kHz and 20kHz..
- INCLUDES: Remote knob, cable, mounting clip, and mounting screws.
Check Stock
