Categories

Best Battery Clamp

Amprobe AMP-310 Clamp Meter

  • 18-Inch flexible clamp on meter enables measurements in areas that are difficult to access.
  • True RMS CAT IV 600V, CAT III 1000V meter.
  • Backlit LCD display for clear readings with 3000 count.
  • Durable, with drop protection to 6.6-feet (2 m).
  • Auto-power off after 15 minutes of non-usage conserves battery life.
  • Low battery indicator and easily accessible battery compartment.
Check Stock

VGEBY Wiper Puller, Windshield Wiper Removal Tool Heavy-Duty Battery Terminal and Wiper Arm Puller

  • TOP QUALITY: After professional technical testing and improvement, Windshield Wiper Removal Tool can give you the best choice..
  • PROFESSIONAL: Remove battery terminal clamp without damage to battery post..
  • CONVENIENT: Removes stuck battery terminals,tighten knurled cone to force jaws under the cable clamp,turn center screw to lift clamp off terminal.
  • MULTIFUNCTION: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • GUARANTEE: If you have any problem with this product, you can take advantage of our 180 days warranty. We will change or refund for any reason..
Check Stock

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

  • ...ing Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
  • ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1 ~ 60A AC DC current, 1A for 60 ~ 400A to support accurate amp reading, this clamp amp probe meter is more user-friendly for daily current measurement, such as troubleshooting car, boats battery.
  • ⚡【Clamp On Live Wire for Measurement】To measure amp with this clamp meter, you MUST separate the hot and neutral conductors, and clamp around only LIVE wire for measurement otherwise they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter.
Check Stock

SmallRig V Mount Battery Plate V-Lock Mount Battery Plate with Dual 15mm Rod Clamp for Camera Power Supply - 3016

  • 【V-Lock Battery Plate】SmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to....
  • 【Comes with Dual Rod Clamp】It comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods..
  • 【Multiple Mounting Points】The plate itself features multiple 1/4"-20 countersinks, M3 countersinks, M4 countersinks, 1/4"-20 thread holes, M4....
  • 【Wide Compatibility】The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with....
  • 【High Customization】Two stoppers will prevent the battery from twisting when attached. The plate is also compatible with the Blackmagic URSA mini.....
Check Stock

Automotive Battery Tester 6V / 12V Digital Battery Analyzer Lead-acid Accumulators Automotive Battery Load Tester for UPS Battery, Solar Energy Storage Battery, Marine Battery(20A 5Ah ~ 80Ah)

  • √ For 6V / 12V Lead-acid Batteries — Judge the no-load energy, the on-load condition, the internal resistance of the battery and the charging system conditions of 6V and 12V lead-acid accumulator quickly, simply, accurately and reliably..
  • √ Wide Application — Avaiable for electric vehicle battery, UPS battery, solar energy storage battery, automotive battery, marine battery, BUT NOT for testing starting battery(CCA).
  • √ Heat Fast — The shell is made of solid ABS engineering materials, and the load heating simulation part is up and down installed with stainless steel porous plate, and the fan is configured to strengthen heat dissipation, which make the test more stable and more reliable..
  • √ Accurately Measure — The test line part is composed of thick pure copper test wire, The test sampling data are directly sampled from the outgoing terminal of the battery in order to really recover the battery. The result will more accurate when testing in working..
  • √ Easy Operation — Equipped with four-wire Kelvin test clamp for connection. 4-wires internal resistance test, 4 digits display for clear reading. There are Poor contact prompt for test clamp.
Check Stock

Digital Clamp Meter, Amp Clamp T-RMS 6000 Counts, Clamp Multimeter Voltage Amp Ohm Tester, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC Current)

  • ▲The "Return to Zero" Function : reduces data errors affected by the earth's magnetic field and helps you get more accurate measurements.
  • ▲Automatic Sleep Mode : After 30 minutes of inactivity, it automatically switches to sleep mode to save energy.
  • ▲Low Power Indicator : When the clamp meter is in a low battery state, the LCD display of the clamp meter will display a low battery symbol to remind you to replace the battery.
  • ▲Fixed with Free Additional Test Lead : free battery and test lead, everything packed in a case, direct use.
  • The design is ergonomic and portable, ideal for professionals or new users.
  • ▲Package Content : 1 x Digital Clamp Meter, 2 x Test Leads, 3 x 1.5V AAA Batteries, 1 x Carrying Bag, 1 x User Manual.
  • ▲24-Month Warranty : We provide 24 months unconditional warranty and lifetime after-sales service.
Check Stock

EC5 Jumper Cable, Yeworth Automotive Replacement Car Jumper Cable Alligator Clip Clamp to EC5 Connector for 12V Portable Emergency Car Jump Starter Booster

  • Usage of car jump starter: 1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole.
  • 2. Plug the clamp EC5 into the jumper starter's socket.
  • 200A instant Maximum start current, fits most brands of mini portable jump boxes, mobile chargers..
  • Compatible with most 12V mini jump starter..
  • Strong alligator clamp with full copper material cable, make sure the great qulity and safety protection..
  • What You Get: 1 x Yeworth Jumper Starter Cable Clamp.
  • Friendly customer service always ready to assist you..
Check Stock

SmallRig Mini V Mount Battery Plate V-Lock Mount Battery Plate with Crab-Shaped Clamp for Camera Power Supply - 2989

  • 【mini V-Lock Battery Plate】SmallRig Mini V Mount Battery Plate with Crab-Shaped Clamp 2989 utilizing a standard V mount fits most V mount....
  • 【Clamp Fits 0.6 to 1.2" Surface】SmallRig 2989 comes with a crab-shaped clamp that fits rod diameter from 15mm to 30mm to help mount a V mount....
  • 【Multiple Mounting Points】The plate itself features two 1/4-20" countersinks, two 1/4-20" thread holes, and four M4 thread holes, which can be....
  • 【Compatibility】The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries but it is not compatible with PAGlink....
  • 【Please Note】1. No V-Lock part (male) was provided with the plate. 2. In order to achieve the maximum compatibility of the crab-shaped clamp,....
Check Stock

OTUAYAUTO Battery Terminal and Wiper Arm Puller

  • This Puller designed for professionally dual-purpose use.
  • Easy and safely to remove the stuck on the rear wiper arm.
  • Use to remove battery terminal clamp without damage to cause battery post.
  • Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline.
Check Stock

ANDYCINE Pocket V-Lock Plate Quick Release Assembly V-Mount Plate with 15mm Rod Clamp for All V Mount Battery

  • 【Mini Version V-Lock Mount】This is a V-Lock quick release plate with a mini shape. Standard female V-Dock and male V-Lock compatible with all....
  • 【Dual 15mm Rod Clamp】It comes with a dual 15mm rod clamp. This 15mm rod clamp attaches to the plate and allows you to mount the battery plate onto....
  • 【Mounting Points】 With the multiple mounting holes and grooves on the Female V-Dock, you can attach this assembly directly to camera cage, monitor....
  • 【Compatibility】Fits most V-mount batteries. But don’t compatible with PAGlink series V mount batteries and Patona Premium Battery for BP-190WS.....
  • 【ANTI-TWIST】 The two stoppers prevent it from twisting when V-Mount battery attached. Packaging list: 1x V-Lock,1x V-Dock, 8x M3....
Check Stock

Autel MaxiSys MSOAK Oscilloscope Accessory: Work with MaxiFlash VCMI MSUltra MS919 & MP408, 65A&650A AC/DC Current Clamp, Coil On Plug Probe Included with Carrying Case Accessory Kit

  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】Autel MaxiSys MSOAK, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs), within a blow-molded carrying case. To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash.
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】 Includes 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil on Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs).
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】The current clamp measures a maximum current of 65A with a frequency up to 20 KHz. It works with jaws that open to allow clamping around an electrical conductor. And the 650A AC/DC current clamp measures a maximum current of 650A with a frequency up to 400 KHz..
  • 【Autel MaxiSys MSOAK for MSULTRA, MS919 & MP408】COP Probe can catch the ignition waveform of automobile engine easily. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers. It determines whether the ignition plug needs to be replaced or clea....
Check Stock

Ebike Conversion Kit for Battery Adapter Frame Mount, Aluminum Black

  • 【Open Slot】Our electric bike conversion kit with open slot, that allows fit the adapter onto the frame with the bottle cage hole. Position can be adjusted along the slot so that the bigger battery should be able to fit in the frame..
  • 【Material Size】The ebike kit battery pack adapter is made of 6061-T6 aluminum and assembled with stainless steel hardware. Size:202×20×9mm. Weight:61g. Zip tie cutting width:14mm. Hollow carved design and chamfer for light weight..
  • 【14mm Stainless Steel Hose Clamp】Two 14mm wide stainless steel hose clamps enhance the bearing capacity and firmness. The elastic design can be adjusted and is suitable for bicycle frames of different thicknesses. Attached the sponge pad can prevent damage to the frame..
  • 【Threaded Holes】Our battery hold down mount have the same distance compare with bottle cage hole. A battery pack of normal size and weight can be installed, or fit anther bottle cage for smaller range extension bottle battery ebike..
  • 【PACKAGE INCLUDE】1×bottle battery adapter, 4×M16 hardware screw, 2×hose clamp, 3×protective pad(protect frame painting)..
Check Stock

2 Pack 14 Ft Xtreme Control Cables Fits for Johnson, for BRP, CCX20514

  • Clamp Size(Each): 3.5 x 1.6 x 0.7cm/1.4"" x 0.6" x 0.28"(L*W*T).
Check Stock