Categories

Best Battery For Traxxas Rustler 4xvxl

Traxxas Rustler 4x4 VXL, Brushless RC Truck, 65+ mph, Green

  • Traxxas 67076-4 - Rustler VXL Brushless 1/10 4X4 Stadium Truck W/TSM RTR, Green.
  • Features: VXL-3s Waterproof Electronic Speed Control Velineon 3500kV Brushless Motor Traxxas Stability Management (TSM) Up to 65+ mph with 3S LiPo battery TQi 2.4GHz High Output Radio System Clipless ProGraphix Body Low-CG Chassis design for responsive handling Traxxas Exclusive Self-Righting Extreme-duty driveshafts Talon EXT 2.8" tires.
  • Includes: (1) Rustler 4x4 VXL RTR (1) 2.4GHz 2-ch Transmitter & Receiver (1) Body (1) ESC (1) Motor (1) Servo.
  • Specs: Length: 18.78 inches (477mm) Width: 12.94 inches (329mm) Ground Clearance: 1.1 inches (27mm) Weight: 5.12lbs (2.32 kg) Height: 6.35 inches (161mm) Wheelbase: 11.62 inches (295mm) Front Shock Length: Long Rear Shock Length: XX-Long Tires (pre-glued): 4.5” x 2.3” (114mm x 58mm) Talon EXT Wheels: 2.8 inches (71mm) Black Chrome Speed Control: VXL-3s Motor (electric): Velineon 3500 Brushless Battery Compartment: 162mm x 50mm x 25mm (*42mm.
  • Part number(s) included (in factory packaging): 67076-4.
Check Stock

Traxxas 67076-4-ORNG Rustler 4X4 VXL: 1/10 Scale Stadium Truck

  • Traxxas 67076-4 - Rustler VXL Brushless 1/10 4X4 Stadium Truck W/TSM RTR, Orange.
  • Features: VXL-3s Waterproof Electronic Speed Control Velineon 3500kV Brushless Motor Traxxas Stability Management (TSM) Up to 65+ mph with 3S LiPo battery TQi 2.4GHz High Output Radio System Clipless ProGraphix Body Low-CG Chassis design for responsive handling Traxxas Exclusive Self-Righting Extreme-duty driveshafts Talon EXT 2.8" tires.
  • Includes: (1) Rustler 4x4 VXL RTR (1) 2.4GHz 2-ch Transmitter & Receiver (1) Body (1) ESC (1) Motor (1) Servo.
  • Specs: Length: 18.78 inches (477mm) Width: 12.94 inches (329mm) Ground Clearance: 1.1 inches (27mm) Weight: 5.12lbs (2.32 kg) Height: 6.35 inches (161mm) Wheelbase: 11.62 inches (295mm) Front Shock Length: Long Rear Shock Length: XX-Long Tires (pre-glued): 4.5” x 2.3” (114mm x 58mm) Talon EXT Wheels: 2.8 inches (71mm) Black Chrome Speed Control: VXL-3s Motor (electric): Velineon 3500 Brushless Battery Compartment: 162mm x 50mm x 25mm (*42mm.
  • Part number(s) included (in factory packaging): 67076-4.
Check Stock

for Traxxas Slash Rustler Bandit Vxl 4X4 4WD 2WD Orange Parts Shocks Absorber Front Rear 1 10 Damper Short Course Racing Truck Upgrade 4-Pack

  • ✔ Compatible With traxxas slash 4x4/ traxxas rustler 4x4 vxl/traxxas slash 2wd/traxxas rustler/traxxas bandit/traxxas stampede/Rally 4X4/Hoss 4x4 VXL.
  • ✔ Fitted Really Well.Oil Filled Style,Adjustable Tension,Very Smooth And Durable.Good for Big Jumps..
  • ✔ Alloy Aluminum Front Shock Absorber : Approx.100mm.
  • Alloy Aluminum Rear Shock Absorber : Approx.110mm.
  • ✔ 4 Shocks Per Package. All Hardware For Assembly Included..
  • ✔ Premium Quality Aluminum Shocks Upgrade Parts Ship Fast .Responsive Customer Service..
Check Stock

Traxxas 3640 Steel Suspension Screw Pin Set (Rustler, Stampede, Bandit)

  • Requires part #2640 for a complete suspension pin set.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Rustler.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas 2797 Suspension Arm Mounts 0-Degree pair

  • Rc shock tower easily upgrades and replaces stock parts #3639 Front Shock Tower,#3638 Rear Shock Tower for Traxxas..
  • Compatible with Traxxas 1/10 Slash 2WD, Slash VXL, Stampede VXL, Bandit VXL, Bandit, Ford F-150 Raptor, Rustler VXL, Rustler etc 2WD car..
  • 2WD shock tower with multiple holes, you can adjust the angle, height, and height of the shock absorber to suit different ways of play..
  • 1/10 slash shock tower CNC precision machining, Made of aluminum alloy material, it has strong impact resistance and protects your car body from....
  • Rustler shock tower include: 1x Front, 1x Rear, 1× Screw pack.
Check Stock

J Concepts Inc. 1/10 '79 F250 SuperCab Monster Truck Clear Body, 12.75 WB, JCO0329

  • Body comes pre-cut and requires painting.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Rustler VXL.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822

  • This is a brand new Traxxas 2WD Slash chassis..
  • It includes everything seen in the pictures.
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools..
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis.
  • Pulled from a brand new Traxxas 2WD Slash..
Check Stock

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

KERO 2S 4500mAh 7.6V 25C Lipo Battery HardCase for 7.4V 1/8 1/10 RC Car Boat Truck Heli Airplane（2 Packs）

  • 【KERO 2S Lipo Battery】- KERO RC lipo battery is designed with high capacity and powerful performance with a discharge rate 25C and 4500mAh..
  • 【Specification】- Material: Lithium polymer.
  • 【Application】4500mAh 2s 25C Lipo battery specially designed for professional 1/10 scale and 1/8 scale RC car hobby models such as Traxxas Slash, Emaxx, Bandit, Rustler,Stampede, version, Losi, Team Associated, etc. ARRMA Granite Voltage，HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version(Only if the voltage, dimension and the plug match, then it will fit).
  • 【What You Get】 2 Packs of KERO 2S 7.4V 4500mAh 25C T Plug lipo battery.
Check Stock

Traxxas 3696 30-T Steel Idler Gear

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles!.
  • This product is made from high quality materials, and designed for lasting performance..
  • This is for use on RC vehicles such as the Traxxas Rustler, consult your user's manual for exact parts listings..
Check Stock

Traxxas 37076-4-YLW Rustler VXL: 110 Scale Stadium Truck with TQi 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 37076-4 - Rustler VXL Brushless 1/10 2WD Stadium Truck RTR, Yellow.
  • Features: Traxxas Stability Management Powered by the Velineon Brushless Power System Rustler VXL reaches speeds in excess of 70mph!* Patented Traxxas High-Current Connector transfers maximum voltage to the Velineon Brushless Power System Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow Maxx Cable 12-gauge wire Velineon VXL-3s Electronic Speed Control Velineon 3500 Brushless Motor TQi 2.4GHz transmitter Dig.
  • Includes: (1) Rustler VXL Chassis RTR (1) Velineon Brushless Motor (1) Velineon ESC (1) 2.4GHz Radio with High-torque Digital Servo (1) Painted Body w/Rear Wing (1) Instruction Manual.
  • Specs: Vehicle Dimensions: Length: 17.5" (445mm) Width: 12.6" (320mm) Height: 6.7" (170mm) Weight: 3.3lbs (1500g) Approx., Wheelbase: 11.6" (294mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.25" (311mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Tires-Front and Rear: 2.8" (72mm) Wide, 5" (127mm) Diameter, Body Dimensions: Length: 16" (406mm) Width: 6.5" (164mm) at Rear Wheels (Widest Poi.
  • Part number(s) included (in factory packaging): 37076-4.
Check Stock

Traxxas 3669A 2.8

  • 2.8" All-Star black chrome wheels with Talon tires and foam inserts.
  • Fits rear: Jato/3.3, N. Stampede,N. Rustler, N. Sport, Fits front: E. Stampede and E. Rustler.
  • Increase the ride height and ground clearance of any Traxxas stadium truck by adding a set 2.8" Talon tires..
  • When using 2.8" Talon tires on Nitro Sport, Nitro Rustler, or Jato/3.3 use a clutch bell that is 2-4 teeth smaller than stock.
  • When using 2.8" Talon tires on the electric Rustler use a pinion gear that is 4-5 teeth smaller than stock.
Check Stock

Raidenracing Nylon Mesh Chassis Dirt Dust Resist Guard Cover for Traxxas 1/10 Rustler 4X4 VXL 4WD Brush & Brushless

  • For Traxxas 1/10 Traxxas 1/10 Rustler 4X4 Brush & Brushless Version , NOT for OLD 2WD Edition Rustler.
  • Attention: This item only include the dirt cover , the truck in picture is not included.
  • Clean the Chssis , and Warm up the double-sided tape with hair dryer (until the glue has signs of liquefaction) before stick it to the Chassis , it....
Check Stock