Categories

Best Battery Holder Connector

LAMPVPATH 3 Pcs 4 x 1.5V 6V AA Battery Holder Leads with 3 Pcs 9V I Type Snap Connector Plastic Housing Two Layers Battery Case

  • Battery Type: 4 x aa battery, 4 x 1.5V (6V) AA battery.
  • 4 AA Battery Holder Body Size : 6 x 3 x 3cm/2.36" x1.18 " x1.18 "(L*W*H).
  • 9V Snap Connector Size( Each ) :2.4 x 1.3 x 1cm/0.94" x 0.51" x 0.39" with wire length 14cm/5.5".
  • Material:plastic ABS+Metal, Color : Black,Weight: 15g.
  • Package Content : (3 Pcs) 4-slots Two Layers AA Battery Holder for 4 Batteries with (3 Pcs) 9V I Type Snap Connector.
Check Stock

2 Kits LED Fake Fire Flames Prop Led Candlelight Strip 9V 12V Battery Operated for Theatrical Props

  • ... the LED strip segment for robust design. The LED wick segment is 3 inches nominal in length with a width of 5/8 inches nominal. The LED flame spectrum strip emits light from both sides and is semi rigid..
  • Overall length of the strip and cable end to end is 24 inches nominal. The cable is terminated with a DC barrel connector of the 2.1mm x 5.5mm size. The battery holder assembly has a mating DC barrel connector on the 9V battery clip which plugs onto the 8 AA cell battery holder. This kit contains 2 LED Lighting Wick Strips, 2 pieces 9-volt battery clips, 2 pieces 8 AA cell battery holders..
Check Stock

DaierTek 4 AA Battery Holder with Switch 6V Battery Case Holder with Cover 4 Slots 1.5V AA Battery Storage Box with Wires Battery Connector -3pcs

  • Type: 4 AA battery holder with switch, 6V (4 x 1.5V) AA case battery storage..
  • Dimension: The size of the battery case holder is 68.7mm x 64.2mm x 22.5mm (LxWxH)..
  • With Wire: This AA battery case is lead design, the length of the tinned end wire is about 150mm (5.9 inch)..
  • Switch Design: There is an ON/OFF switch on the back of the AA case holder, make the use of the AA box easier and more convenient for you..
  • With Cover: This AA battery connector with switch will come with a cover, and this AA holder with cover is screw design, which can effectively prevent the box from accidental opening..
Check Stock

Pack of 2 6V Power Box 4xAA Battery Holder Case with DC Connector Compatible with Barrel Jack Connector for Arduino

  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
  • The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
  • Package includes: 2 x 4xAA Battery Holder Case.
Check Stock

WMYCONGCONG 70 PCS Mixed Color 12V DC 5mm LED Pre Wired 20cm Bulb Lamp w/ 20 PCS 5mm Light Emitting Diode LED Holder w/ 10 PCS 9V Battery Clip Connector

  • Pre-wired with built in resistor, soldered well and heatshrinked, ideal for hobbyists, RC car, boat, custom builds, DIY Car Boat Toys Parties and multiply lighting projects etc..
  • 5mm metal LED holders, secure to hold LED firmly.
  • 9V wired battery clip connector, great replacement for a broken battery connector on your electronic device..
  • Color: red, green, white, yellow, blue, quick flashing and slow falshing..
  • Operational voltage range: DC 2v-12v. 2v very dim, 12v very bright..
  • Package Content: 70pcs 5mm LED pre wired light(10pcs each color) + 20 pcs 5mm LED Lamp Holder + 10 pcs Battery Clip Connector..
Check Stock

SDTC Tech 2-Set 4X 1.5V AA Battery Holder and I Type Battery Snap Connector Kit 6 Volt Thicken Plastic Battery Case Box

  • The AA Battery Holder suit for 4x 1.5V AA batteries, and ouput voltage is 6 volt..
  • I Type Battery Snap Connector with hard plastic shell, 15 cm / 6 inch length, easy to solder or connect..
  • Made of thicken plastic shell, copper conductor and nickel-plated steel spring, to ensure effective good contact, sturdy and durable..
  • 4 AA Battery Case Size is 57 * 32 * 29mm, widely used in electronic circuit experiment, Arduino projects, led devices, household appliances etc..
  • Package includes 2pcs 4x AA Battery Holder, 2pcs I Type Battery Snap Wire Leads..
Check Stock

SDTC Tech 2-Set 8X 1.5V AA Battery Holder and I Type Battery Snap Connector Kit 12 Volt Thicken Plastic Battery Case Box

  • The AA Battery Holder suit for 8x 1.5V AA batteries, and ouput voltage is 12 volt..
  • I Type Battery Snap Connector with hard plastic shell, 15 cm / 6 inch length, easy to solder or connect..
  • Made of thicken plastic shell, copper conductor and nickel-plated steel spring, to ensure effective good contact, sturdy and durable..
  • 8 AA Battery Case Size is 63 * 58 * 30mm, widely used in electronic circuit experiment, Arduino projects, led devices, household appliances etc..
  • Package includes 2pcs 8x AA Battery Holder, 2pcs I Type Battery Snap Wire Leads..
Check Stock

DZS Elec 10-Pack DC 3-24V Black Electronic Buzzer Beep Continuous Alarm Sound Sounder and T Type 9V Battery Clip Buckle Connector Cable Lead

  • Package: 5pcs DC 3-24V Electronic Buzzer +5pcs T Type 9V Battery Holder Clip Connector..
  • Buzzer Wire length: Approx.12cm,T Type Battery Holder Clip Wire length:Approx.25cm.The structure of product is compact that provide excellent....
  • The buzzer features low voltage and low power consumption,this module is ideally suited to adding sound to your project..
  • Easy to install,good conductivity,good contact performance,long service life..
  • The battery clip is suit for 9V batteries with two wire connection,suitable for connecting battery,multimeter,alarm apparatus, etc..
Check Stock

Onwon 6 Pieces 2 Slots x 1.5V AA Battery Case Holder Battery Spring Clip Storage Box Wire Leads with On/Off Switch

  • Multipurpose Battery Case Holder: You can use this case with your own battery to form power system supply.
  • High quality ABS plastic case, brass rivet connector, 6-inch black red wire leads(coarse wire), durable repeated use,lightweight,convenient to carry.
  • Easy install, with ON/OFF switch convenient to use, enclosed Holders come with screw to secure,with spring clip design, you can easily to put the battery in it.
  • Perfect external power source for electronic DIY, the battery holder is for circuit boards, electric toys, digital photo frames, electronic calendar and other digital products,and more,add them in series if you need more voltage.
  • Pay Attention: Do not touch the red black line when you series output 3V is installed on the battery. The screw can be fixed(Screw not attached).
Check Stock

E-outstanding Battery Holder 2PCS 9V Battery Boxes Case with ON/Off Switch and 5.5 x 2.1mm DC Plug Lead Wire for Arduino

  • Connector type: 2.1x5.5mm DC male connector. Lead length: 15 cm/5.9 inches. Package includes: 2PCS..
  • Adopt spring clamp design, easy to install and remove the battery..
  • Battery holder with ON/OFF switch and cover..
  • Very suitable for electronic applications and small hobby projects..
Check Stock

Mxzzand 3in Industrial Robot Parts Accessories Omnidirectional Wheel Metal 2Pcs for Industry Production with 10pcs Driven Roller

  • Among the many items in this kit are: Linkbot-I robot, 1 Linkbot Wireless Dongle, 3 Snap Connectors, 2 3.5" Wheels, 2 4" Wheels,1 Ball Caster, 1 Push Scoop, 1 Hacky Sack, 1 36" USB Cable, 1 7" USB Cable, 1 8"x10" Resealable Bag, 1 Year Linkbot Warranty.
  • 1 Sketch Pack, 12 Snap Connectors, 1 Gripper Pair, 2 Bridge Connectors, 3 Cube Connectors, 1 L Connector, 1 U Connector. 2 Snap Connector Caps, 2 3" Rectangle Connectors, 2 4" Rectangle Connectors, 2 5" Rectangle Connectors, 2 T Connectors, 8 Colored Foam Cubes, various screws and nuts.
  • 2 Arduino-Uno-Compatible Boards, 1 USB A-B Cable, 1 Joystick, 1 RGB LED, 1 Ultrasonic Distance Sensor, 8 Red LEDs, 8 Green LEDs, 8 Blue LEDs, 8 Yellow LEDs, 2 7-Color LEDs, 2 GRB LEDs, 12 220 Ohm Resistors, 12 10k Ohm Resistors, 1 LDR VT90N2 Photoresistor, jumper wires, 3 10k Potentiometers, 1 Fullsize Breadboard, 6 Push Buttons.
  • 1 9V Battery Holder, 1 Mini Breadboard, 1 Linkbot-Arduino Cable, 1 2-in-1 Dual Phillips/Slotted Screwdriver, 3 Snap Connectors, 1 Cube Connector, 1 L Connector, 3 Mounting Plates, 2 Sensor Bracket, 1 Li-ion Rechargeable Battery,.
  • 1 Color Sensor, 2 Short Distance IR Distance Sensors,1 RGB LED Module with Common Positive Lead (Common Anode), 2 RGB LED Module with Common Negative Lead (Common Cathode....
Check Stock

Battery Case Holder with Lead Wire Bundle,6PCS 9 V Battery Clip Connector T-Type 9 Volt Battery Clip with 2.1 x 5.5 mm Male DC Power Plug for 9V Battery Connector for Arduino DIY

  • Pure Copper Cord: 24awg UL Pigtail Cables(black),Holder Type: T-type Terminal with Leather Shell,Super Tight Snap Head..
  • 9V battery clip connector T-type with 2.1 x 5.5 mm male dc power plug for arduino diy..
  • The 9v battery clip connector is made of solid plastic and metal, which is not easy to break and has good contact performance, without risk of electric leakage..
  • Each 2.4 x 1.2 x 0.7cm, 9V battery clip connectors with 2.1 x 5.5 mm male dc power plug (not including 9 V batteries)..
  • This 9 volt battery clip t-type with 2.1 x 5.5 mm male dc power plug is widely used in student experiment, LED strip lights, or arduino or other devices with a 9V battery..
Check Stock

Swpeet 10Pcs Series or Parallel D Battery Holder Kit, Perfect for Physics Laboratory, School Electronic Experimenting, Great for Demos Teaching Basic Principles of Electricity

  • ...w Type Easy for students to use】 ------ This is great for home school making and breaking a single electrical connection circuit experiments. good for teaching basic principles of electricity & how a simple circuit works. screw type binding post, If you use alligator clips you might want to temporarily remove the connector knobs..
  • ☛ 3, 【 Parallel or Series Connections Wide Applications】 ------ These are great for demos and project. Easy to use and great learning tool for kids. I think practicing on an education model would definitely benefit any student. These durable individual plastic d-cell battery holders can be quickly and easily snapped together to form either parallel or series connections. They can be used individually or configured in parallel..
  • ☛ 4, 【 D Battery Holder Good Choice 】------- The Battery Holder is sturdy and well made. It works well in the hand of students. Battery Holde provides stability in handling and visualization of electrical principles, screw type binding post ,screw down connection terminals are heavy duty,for secure electrical connection..
  • ☛ 5, 【 Warm Note】 ------ Of course that while this does teach them how electricity works, you have to make sure to teach them not to play with actual electrical equ....
Check Stock