Categories

Best Baud Rate Conversion

DIYmall VK16E G28U7FTTL GMOUSE GPS Module Ceramic Antenna TTL Level 9600 Baud Rate for Vehicle Monitoring Navigation

  • Baud rate: 4800,9600,19200,38400,57600,112500bps (default baud rate is 9600).
  • Built-in Flash, free configuration of product parameters.
  • Application: It can be used in vehicle monitoring, bus station, car guide Navigation, ship navigation, notebook navigation and other products.
Check Stock

2Pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial Transceiver Module Bi-Directional Serial Support Slave and Master Mode

  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
  • Operating voltage: 3.3V(Note:SPP-CA Bluetooth module serial port level to 3.3V, if connect 5V level,the system needs to increase the level conversion....
  • Small size, low power consumption,high sensitivity for send and receive.
  • Allows your device to both send or receive the TTL data via Bluetooth....
  • Defaults: Salve, baud rate 9600, Bluetooth name HC-06, pairing password 1234, LED status light on.Core module uses HC-06, leads from the module....
  • Applications: The Bluetooth module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial....
Check Stock

IZOKEE CP2102 Module USB to TTL 5PIN Serial Converter Adapter Module Downloader for UART STC 3.3V and 5V with Jumper Wires

  • Designed to be used for USB to TTL electronic projects..
  • Supports full range of STC single-chip microcomputer with output voltage 3.3V and 5V..
  • Perfect support for the highest baud rate up to 115200 bps..
  • Module has status indicator light, sending and receiving indicator lights. After the driver is correctly installed, the status indicator will be on, the sending and receiving indicators will flash when communicating, and the higher baud rate, the lower brightness..
Check Stock

DSD TECH SH-B23A Bluetooth 2.0 to RS232 Serial Adapter with DB9 Converter

  • Bluetooth RS232 Adapter : With this Bluetooth RS232 adapter, you can wirelessly communicate with any RS232 devices on Android smartphones or a Bluetooth enabled computer..
  • Built-in Industrial Bluetooth 2.0 SPP module driven by the CSR BC417 chip. Compatible with Android phones and Bluetooth enabled computers, but not compatible with any iOS device..
  • RS232 DB9 Interface: Please note that only Rx and Tx signals are valid. Does not support CTS, RTS hardware flow control..
  • Bluetooth pairing PIN: 1234, Baud rate parameters: 9600, N, 8, 1. Transmission distance of more than 20 meters.Baud rate and Bluetooth name and PIN can be configured by software. DSD TECH provides setup software for free..
  • About WARRANTY: DSD TECH offers a one-year warranty and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours..
Check Stock

Needenr Wireless 100Meter Class 1 RS232 Bluetooth Serial Adapter SPP Profile with External Antenna 3.0 Male Link for CNC Machines PLC,Laptop or Other Device

  • HOST INTERFACE: RS232(D_SUB 9-pin male) ,The adaptor eliminates your conventional RS232 serial cables, Bluetooth wireless serial port adaptor, is the....
  • Bluetooth classical V3.0 ,Class 1 Bluetooth RS232 Adapter with with external antennal,Support up to 100 meters (line of sight).
  • BAUD RATE: 1.2K~1382.4Kbps,Supports 4.8/9.6/19.2/38.4/57.6/115.2/230.4 Kbps The factory settings is 9600bps (default),You can reprogram Baud rate by....
  • Communicating Interface: D_SUB 9-pin Male ,Standard RS232 five-wire serial mode (RxD, TxD, RTS, CTS, GND).
  • Power: Plug power supply and DB9 seat power supply, 6 ~ 9V 500mA rated current.
Check Stock

USBGear USB to Serial RS232 DB9 Adapter FTDI Chipset, Windows 11 Support

  • WHATS INCLUDED - 12 Inch USB to RS-232 Serial Adapter, User Guide/Instruction Manual, and Driver Disc.
  • FEATURES - High speed serial port with the baud rate up to 921.6K bps. Transmit Buffer: 512 bytes. Receive Buffer: 512 bytes. Non-standard baud rates supported. LED status indicators for TxD and RxD for easy port monitoring and diagnostic. COM port number.
  • COMPATABILITY - With support on multiple OS platforms this makes ours very versatile. Supported OS platforms are Windows 7, 8, 10, and 11 as well as Linux and MacOS 10..
  • WHY USBGear? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most demanding industries for over 20 years. Reach out to us for CAD, Mechanical Drawings and, Data Sheets..
  • RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND.
Check Stock

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

StarTech.com 1 Port USB to Serial RS232 Adapter - Prolific PL-2303 - USB to DB9 Serial Adapter Cable - RS232 Serial Converter (ICUSB232V2)

  • MAXIMIZED PORTABILITY: This USB to serial RS232 adapter converts a USB port into an RS232 DB9 serial port to connect to, monitor, and control a serial device.
  • BROAD COMPATIBILITY: Compatible with your USB 1.0 or 2.0 ports, this USB to RS232 converter works with your Windows, Mac or Linux system.
  • FAST TRANSFER SPEEDS: Experience fast speeds with this USB to DB9 serial adapter, supporting a Baud Rate up to 921.6Kbps.
  • PORTABLE DESIGN: Powered by a USB port, this USB to RS232 serial adapter cable features a lightweight design that conveniently fits into your carrying case, making it ideal for professionals on the go.
  • Install in almost any laptop or desktop computer through broad operating system compatibility, including Windows 8.
  • Communicate efficiently with connected devices with high-speed 921Kbps support.
  • Portable and lightweight, the USB-Powered design requires no additional power adapter.
  • USB to Straight-Through RS232 DB9 Serial Adapter.
  • Compatible with Windows 8, Mac OS X and Linux.
  • USB-powered - no external power adapter required.
Check Stock

Bluetooth Serial Port Transceiver Baseboard, HC-05 Wireless Bluetooth Transceiver Module, Mini Low Power Consumption

  • Enhanced data rate (EDR) conforms to the 2Mbps and 3Mbps modulation modes of the V2.0.E.2 specification..
  • Support Bluetooth connection through AT command, set baud rate, password, save parameters after setting parameters..
  • Bluetooth UART RS232 serial converter module for easy transfer of UART data..
  • On board 3.3V regulator chip, ROHS compliant, compact size..
  • Full speed Bluetooth operation, support for full Piconet and Scatternet..
Check Stock

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

  • ...ent, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
  • Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8. GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz). Class 1 (1 W @ 1800 / 1900MHz). Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or hexadecimal)..
Check Stock

Module,Development Board Module Kit,5~26V SIM Development Module,Fit for SIM900 850/900/1800/1900 MHz GPRS/GSM,Quad-Band 850/900/ 1800/1900 MHz - Would Work on GSM Networks

  • ... large current, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers.Speaker and Headphone jacks..
  • The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default).Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data to a web server.RTC supported.Selectable serial port.Low power consumption - 1.5mA(sleep mode)..
Check Stock

Rosewill Hard Drive Enclosure with Cable Attachment

  • LCD Display Shows the Baud Rate to see Transmission Status.
  • When reaches USB 3.0 will show on LCD pane.
Check Stock

Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash for Arduino Pixhawk IPEX Compatible, Better Than VK-162

  • GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier.
  • Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters.
  • Built-in TCXO Crystal and Farad Capacitors for Faster Hot Start.
  • The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us.
Check Stock