Best Bead Reamer With Adjustable Head
3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 5/16" shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 7/16" shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 9/16" shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 3/4 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 3/4 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 9/16" shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56068, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock7/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56067, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock3/4\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56063, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock7/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56017, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 3/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56049, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 7/8 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check StockDrill America 11/16\ HSS Straight Shank Machine Expansion Reamer (Pack of 2)
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 3/4 " shank diameter, For Reaming abrasive material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock
