Categories

Best Beam Cutting Machine

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

XtremepowerUS 3000W Wall Chaser Cutting Machine Wall Brick Granite Marble Concrete Water Line w/Infrared Sighting Slotting Machine w/Case

  • Multifunction Use - Widely application adapt to different materials of wall, such as red brick, sand brick, brick, water brick, cement cover wall.....
  • Groove Cutting Depth Can Be Set - An Angle of 90 degrees can also be cut.Safe and ergonomically optimum handling. Ensure the safety of the users by....
  • Easy & Simple Operation - Work should take dustproof glasses and Mask. Built-in vacuum port and water pump work at the same time to reduce the dust....
  • One Time Molding - Fast automatic grooving wall tank,suitable for quick and clean cutting of wall chases. Without any auxiliary tools and the second....
  • Built-in Infrared Beam - Wall slotting machine is equipped with infrared rays and rollers. When working, it uses the roller to stabilize the....
Check Stock

Aufero Laser Engraver, Laser Engraving Cutting Machine for Wood and Metal, 32-bit Motherboard LaserGRBL, LightBurn, Eye Protection Compressed Spot, 15.4'' x 15.4'' DIY Engraving Area(AL2 LU2-2)

  • 【Excellent Mechanical Structure】Aufero Laser enraving machine is designed with low gravitity center of X-axis, providing more stability and ensuring accurate engraving even at high processing speed.
  • 390mm×390mm large engraving range to meet various DIY needs.
  • 【Broad Compatibility】Aufero Laser cutting engraving machine is compatible with mature engraving software-LaserGRBL(free), LightBurn(paid).
  • supports Win XP / Win 7 / Win 8 / Win 10, Mac and Linux system.
  • 【4 Safety Protection】→ 1: Active Position Protection.
  • 2:Exposure Duration Detection and Limitation.
  • full safety protection allows you to hook on your project without any worry.
  • 【Dual Eye Protection】Aufero Laser engraver features a protective cover which effecitvely protects your eyes from dazzling beam.
  • comes with a pair of goggles for more protection.
  • works on food, MDF, paperboard, plywood, black acrylic, leather, power coated metal, stone, etc.
Check Stock

NEJE 3 Max A40640 Laser Engraver, 810x460mm App Control DIY Laser Cutter and Engraver Machine Support LightBurn & LaserGRBL, 10W+ Laser Module with Auto Air Assist and Smoke Control

  • 【Top Engraving Capability】A40640 is the world's first dual-beam engraving and cutting module with a zoom design. 10W+ output power, down to 0.04mm focal length, gives the A40640 the best metal engraving capability, fast grooving capability, and thick material cutting compatibility, making it the most widely used wide range of modules. It has a top artistic performance in engraving stainless steel grayscale, stone engraving, glass engraving, hardwood relief, canvas art and other materials.
  • 【Performance Improvement】The optimized A40640 II short focus is suitable for engraving hard materials such as metal stone and cutting high-density materials such as MDF.
  • The long focus has better depth of field and smaller included angle for cutting thick wood and other materials. Due to the high power density, it has an equivalent application higher than 20W laser in large area image engraving. If you only consider 1 module to help you solve all the needs, it is the best choice.
  • 【Large Engraving Area & Meet Various Engraving Needs】460x810mm is the largest engraving area on the market. At the same time, under the NEJE Win software, the engraving area can b....
Check Stock

GALAX PRO 20V 4-1/2" Cordless Circular Saw with 2.0Ah battery, Laser Guide, Rip Guide, 2 Pcs Blades(24T+ 60T), 3400RPM, Max Cutting Depth 1-11/16"(90°), 1-1/8"(45°)

  • Power motor and 2 blades: Blade size 4.5 inches, no load speed 3,400 RPM for faster multi-purpose cuts of wood, soft metal, tile, drywwall, plastic and more with ease.
  • It comes with 2 blades, 24 teeth wood saw blade and 60 teeth metal saw blade which can be easily changed with the allen wrench.
  • Adjustable cutting angle: The maximum depth of cut at 90°is 1-11/16”and bevel capacity at 45 °is 1-1/8”.
  • Perfect for miter cuts, bevels, framing and edging.
  • Angle guide and quick adjustment gives you a huge degree of versatility in your cuts.
  • Laser guide: To ensure a parallel cut, laser guide is available in our compact circular saw.
  • With the laser indicator as the guide during the cutting process, your line will be illuminated by the beam, it ensures a professional and precise cutting line.
  • Safety and ergonomic: Features double protection switch, prevents the machine from accidentally opening, promises a safer cutting job.
  • Soft rubber handle designed to comfortably fit in hand for improved control with minimal vibration.
  • Vacuum adaptor allows to hook up with a vacuum, sucking away all sawdust coming from the cutting.
  • What you get: 1 x mini circular saw, 1 x 2.0Ah li-ion battery, 1 x 24T TCT saw blade, 1 x 60T HSS saw blade, 1 x fast charger, 1 x rip guide, ....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving

  • ... lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】 LATITOOL F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, and the engraving & cutting speed is faster than ordinary compressed light spot is increased by 60%, it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching yo....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

Taytools 465494 Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Hardened .310 inch Diameter Beam Hardened High Speed Steel Cutting Wheel Overall Length 8 Inches Easy Read SAE and Metric

  • This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision woodworking joinery. This tool has excellent mass and weighs in at 6 ounces. This wheel marking gauge will provide years of accurate and reliable performance in the shop..
  • The sharp hardened high speed cutting wheel will leave a sharp and distinct line in soft and hardwood both with and across the grain..
  • The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The ergonomic brass head fits perfectly in the hand providing precise control. The knurled thumb screw is also solid brass and securely locks the head to the beam holding measurements. The head has a countersink so the cutter can be fully retracted protecting it when not in use..
  • The wheel cutter is 7/16 inch in diameter. The cuter can be easily resharpened by rubbing the flat surface in any sharpening media. Replacement cutter are also available..
  • The hardened steel beam is .310 inches in diameter and 8 inches long. Maximum cutting depth of the gauge is a full 7 inches. The beam is black chrome plated to protect against corrosion and to allow easier reading of the mm and SAE graduations. Graduations allow easy....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

  • ...lating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing.
  • 【Extensive Software Compatibility】 ....
Check Stock

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • ...h HD touch operation, make engraving more convenient, thus saving a lot of time and be efficiently..
  • 【Upgraded high-performance fixed-focus laser】No need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
Check Stock

Cricut Variety Pack(1 StrongGrip, 1 LightGrip, 1 StandardGrip) Adhesive Cutting Mat 12

  • Works with the Cricut explore machine, Cricut expression machine, and Cricut expression 2 machine.
  • One 12" x 12" standard grip adhesive cutting mat, one 12" x 12" light grip adhesive cutting mat, and one 12" x 12" strong grip adhesive cutting mat.
  • Recommended materials for standard grip adhesive cutting mat: cardstock, pattern paper, embossed cardstock, iron-on, and vinyl.
  • Recommended materials for light grip adhesive cutting mat: printer paper, thin cardstock, vellum, construction paper, and vinyl.
  • Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine.
  • One 12" x 12" StandardGrip adhesive cutting mat, one 12" x 12" LightGrip adhesive cutting mat, and one 12" x 12" StrongGrip adhesive cutting mat.
  • Recommended materials for StandardGrip adhesive cutting mat: Cardstock, Pattern paper, Embossed cardstock, Iron-on, and Vinyl.
  • Recommended materials for LightGrip adhesive cutting mat: Printer paper, Thin cardstock, Vellum, Construction paper, and Vinyl.
  • Recommended materials for StrongGrip adhesive cutting mat: Thick cardstock, Glitter cardstock, Magnet material, chipboard, Poster board, and Fabric with stiffenerDescriptionCRICUT CUTTING MAT 12X12 VARITY 3 PACK.
Check Stock

Brightown Firewood Kindling Splitter, Manual Kindling Wood Splitting Tool, Cast Steel Log Splitter Wedge, Hand Sturdy Heavy Duty Firewood Cutter Splits Firewood Safely for Home & Campsite

  • 【Safe Using】No need hands contact to the blade of firewood splitter, no sitting on top round edge to avoid getting stuck although the inner diameter is only 6 inches, suggest to fix with 2 included screws to the wooden chopping block during cutting to prevent accidental leaning.
  • 【Portable and Practical】5.1 pounds light weight log cracker, easy and great for taking to anywhere like camping, campfire, outdoor trip, patio, fire pit, backyard, lawn or BBQ site, at the same time, it can be used as a grill or cooking rack if needed(BUT not suggested).
  • 【Warm Tips】To effectively protection, wear a pair of safety goggles during cutting, store the fire wood cutter into the included waterproof bag after using and always keep it out of kid’s reach to avoid accidental injuries.
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Cutter and Engraver Machine, Deep Cutting for 15mm Wood, 0.06mm Ultra-Fine Compressed Spot Cutting Machine, Eye Protection Fixed-Focus

  • 【High Precision & Superb Penetration】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm thick plywood, 10mm thick dark acrylic, engraved ceramics, and stainless steel..
  • 【Safety Protection Design】The laser cutter and engraving machine are equipped with a very convenient power switch, which is not available in others. The laser filter cover filters 98% of the UV light to the eyes, you can watch laser engraving without wearing goggles and prevent animals from catching the laser spot. Comes with a steel pad that can protect the table from laser damage, and isolate fire hazards..
  • 【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL (free), LightBurn (paid), Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Mac system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. (You can view the software operation tutorial in the video).
  • 【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design make....
Check Stock