Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2
- LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
- Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
- Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
- The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
- These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check StockBushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit
- Kit includes replacement bushing and application specific installation tools..
- Text and video instructions along with tech support make installation very easy..
- Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock
Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins
- QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
- MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
- SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
- EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check StockSHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency
- Keep your skateboard better and more comfortable.
- Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
- The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Check StockGM CLIMBING 20kN Micro Prusik Minding Pulley 1/2\ CE UIAA Certified (Pack of 2(Black))
- ... pulley is designed to be with flat bottom to side plates, which makes a PMP (prusik minding pulley) to be integrated into the progress capture on the haul system, and prevent brake hitches to be sucked into the pulley, for a more efficient haul..
- Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Most seen its functions in haul systems, tending hitches in climbing techniques. Also as an efficient general-purpose pulley for daily use, DIY pulley rope fitness home gym, suspending your bike in the garage, tensioning system for you slackline, and more..
Check StockJessEm Model 08350 Dowelling Jig Master Kit, Black (08350-)
- APPLICATION: Create 1/4, 3/8, and 1/2-inch dowel holes on the end or face of your work piece.
- MULTIPLE DOWEL HOLE CONFIGURATION: Locations of dowels can be pre-set in 1/8-inch increments, perfect for creating multiple dowel hole configuration.
- BUILT-IN ALIGNMENT SLOTS: Built-in alignment slot allows you to match up dowel holes that are spaced further apart for perfect aligned dowel holes.
- STURDY CONSTRUCTION: Constructed of precision CNC machined aluminum, anodized for durability and laser engraved for fast set ups.
- INCLUDED GUIDE BUSHING CARRIER: Includes 3/8-inch guide bushing carrier with 5 guide bushings, 1/2-inch guide bushing carrier with 3 guide bushings, and 1/4-inch guide bushing carrier with 7 guide bushings.
Check StockMOSNAI Golf Cart Shock Bushing Kit Fits Club Car 1982&Up DS and Precedent and EZGO 1989&Up TXT Marathon Golf Cart, 4 Shock Bushing Kit for Front and Rear Shocks, Set of 4, Replaces OEM# 1011415
- Golf Cart Shock Absorber Bushing Kits. 4 Shock Bushing Kits for 2 SHOCK..
- Fits 1982-Up Club Car DS & Precedent Gas & Electric Vehicles Replaces OEM# 1011415 and EZGO 1989-Up TXT Marathon Golf Cart..
- This Shock Bushing Kit Fits All EZGO and Club Car Golf Cart with Stud Mounted Shocks..
- Durable and Easy to install like Original Bushing Replacement.
- Golf Cart Shock Bushing Kits includes 8 Rubber Bushings, 8 Retainer Washers, 4 Hex Pal Nut，4 Check Nut..
Check Stock[2 Pack] Mission Automotive Transfer Case Cable Bushing fits Jeep Wrangler JK 2007-2018 and More - Repair Your Jeep Transfer Case Linkage - Replacement 68064273ab Bushing - Easy Installation Bushings
- Don't Get Stranded -- If you take your vehicle off-roading, its transfer case cable bushing can weaken over time and break. This will leave you stuck....
- Exact Fit For -- The Mission Automotive transfer case shifter linkage bushing fits various Jeep Models. Compatibility includes Jeep Wrangler JK....
- Easy Installation -- The Mission Automotive bushing compatible with the Jeep Wrangler transfer case bushing goes on without much effort. First, remove....
- Don't Break The Bank -- Buying automotive parts can add up quickly. Get the best value by ordering the Mission Automotive part compatible with select....
- 2 Pack -- Driving your vehicle causes wear and tear on the transfer case cable bushing. They easily shatter over time. With this pack of 2 Mission....
Check Stock
DEF Door Bushing Removal Tool Hinge Liners for Wrangler JK JKU JL JLU Gladiator JT 2007-2021 (Removal Tool and 2 Pins)
- Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 ..
- Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic..
- Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges..
- Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well..
- Package include: 1 silver door bushing removal tool, 8 bushings and 2 Pins.Door Bushing Removal Tool did not fit TJ.
Check Stock
Door Pin Guides Hinge Liners and Door Bushing Removal Tool Kits (8 Door Pin Guides) 17Pcs For 2007-2020 Jeep Wrangler JK JKU JL JLU
- DURABLE MATERIA:The Door Bushing Removal Tool was constructed with strong iron.Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust..
- FITMENT:Fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited 2007-2020. (Door Bushing Removal Tool did not fit TJ).
- WIDELY USEFUL:These door pin guides help you line up your door pins and put your doors back easily.The door bushing removal tool helps to remove your Jeep corrosive hinges.By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally removed..
- QUANTITY INCLUDED:8*Door Pin Guides,8*Door Hinge Liners,1*Door Bushing Removal Tool..
- 100% SATISFACTION:If you are not satisfied with our kit,please contact us,we will try our best to solve your problem..
Check StockOTC (6913 Extension Housing Bushing Remover for Ford Ranger
- Removes transmission extension housing bushing.
- Inserts through the bushing and the drive screw and is tightened to draw the bushing out of the housing.
- Applications apply to Ford Ranger transmissions.
Check Stock
Long and Short Polyurethane Bushing Replacement for Polaris Sportsman 335 400 400L 450 500 570 800 1996-2018 Replace # 5436973 5439270 - Control Arm Bushing Kit
- 【FIT THE FOLLOWING MODELS】-- Compatible with 1998-2000 Polaris Sportsman 335 | 1996-2014 Polaris Sportsman 400 | 2006-2018 Polaris Sportsman 450 | 1996-2013 Polaris Sportsman 500 | 2014-2018 Polaris Sportsman 570 | 2005-2014 Polaris Sportsman 800..
- 【HARD CONTROL BUSHING】-- With construction of heavy duty material, it can withdraw a lot of press without bending..
- 【POWERFUL FUNCTION】-- The control bushing mainly mounts on car suspension and steering joints to absorb road bumps, control the amount of movement in the joints and reduce noise and vibration；While it is NOT a genuine a arm bushing part, it is an ideal replacement designed to fit or work like the factory part..
- 【QUALITY ASSURANCE】-- Our bushings are high quality polyurethane bushings. This material is stronger than original ones. And it also lasts longer than the ones made of rubber. Thus, it is not easy to get broken or bent and you can use it for a long time to save your pocket money..
- 【BUY WITH CONFIDENCE】-- Order from Skyee-blue for a true worry-free shopping experience. The bushing comes with one year warranty. If the a arm bushing ever fails on your Polaris, just feel free to contact us for a replacement..
Check StockBXA #4 QUICK CHANGE HEAVY DUTY BORING BAR TOOL POST HOLDER 250-204
- For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
- Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.
Check Stock
