Categories

Best Bearing Housing Water Cooled

Frostflow Cooling Fan 120VGA GeForce GTX 4pin GPU Radiator Water Cooler

  • The cold head is designed with multi-platform fastener and supports 58.4×58.4mm and 53.3×53.3mm..
  • GeForce GTX Series graphics cards with two main hole spacing designs (recommended for GTX960/980/980Ti/1050/1060/1070/1070Ti, AMD R390/290/280 series or other graphics cards of corresponding level), please make sure that your graphics cards support the disassembly of the original radiator before purchase..
  • The right side of the cold head is equipped with an air-cooled auxiliary heat dissipation unit and attached with pasted heat dissipation particles, which can ensure that the display and power supply sections are fully cooled..
  • Powerful water pump with ceramic bearing is equipped with pure copper cold head of micro-channel, which can take away GPU heat more quickly..
  • The encrypted 120 aluminium thin row is selected for both heat dissipation efficiency and good compatibility..
Check Stock

JM Turbo Compatible For Subaru Forester Impreza WRX Turbo TD04 TD04L Turbocharger Aa360/aa140/aa151

  • Will Fit: 98-05 Forester 58T EJ20502-07 Impreza WRX.
Check Stock

Upper & Lower Bearing Carrier Puller with Fuel Water Separator Wrench for Yamaha, for Johnson, for Evinrude, for Mercury, for Honda

  • APPLICATION -- All fit for Yamaha. ①Upper Bearing Carrier Puller - Fit For Yamaha, Johnson, Evinrude, Suzuki, for Honda and Mercury upper bearing carrier (NOTE: with carrier style upper bearing housing)②Lower Bearing Carrier Puller - Fits For Yamaha, Johnson, Evinrude, Mercury (DOES NOT FIT VERADO), for Honda, Mercruiser.③Wrench - Fit For Yamaha Outboard Motors 2006 Serial Number 0406 To Current. Fits Yamaha 4-Strokes 150 to 350 HP, HDPI 2006+.
  • FUNCTION -- ①Puller works wonderfully for removing the bearing carrier oil seal and other tasks where a bearing puller is needed.②Wrench is specially designed to remove fuel water separator cup..
  • BENEFITS -- ①Save time and No more prying against seal surfaces. Removes toughest Lower bearing carriers effortlessly with no damage to the carriers.②Safely removes fuel water separator cup from filter assembly without damaging delicate plastic parts and avoids tangling in the water sensor wiring..
  • ADJUSTABLE -- Fits most gearcases 115hp and above. Adjustable arms allows it to be used on a variety of different sized outboard and outdrive / stern drive lower units..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 mon....
Check Stock

SEAFLO Aerator Livewell Pump - 12V, 800GPH, Submersible, Removable Cartridge (Angled)

  • The internal anti-airlock fins ensure even flow of water to your livewell Smaller profiles to fit in more confined spaces The cartridge is easy to remove for cleaning or replacement.
  • Pump is fully submersible and utilizes tin-coated, 16-gauge wire for safety 90 threaded intake, 125mm long Includes two different outlet hose tail configurations - Straight and 90.
  • Compact, efficient, long life motor Rustproof and corrosion resistant Stainless steel shafts suitable for fresh or salt water Extra length for thicker transom.
  • High-impact durable plastic housing Extremely efficient, very low current draw and offer high capacity output Water cooled long-life motors.
  • Ignition protection to protect the pump against high current Water/moisture tight seals Silent and vibrationless operation Anti-airlock protection.
Check Stock

SEAFLO Aerator Livewell Pump - 12V, 800GPH, Submersible, Removable Cartridge (Straight)

  • The internal anti-airlock fins ensure even flow of water to your livewell Smaller profiles to fit in more confined spaces The cartridge is easy to remove for cleaning or replacement.
  • Pump is fully submersible and utilizes tin-coated, 16-gauge wire for safety 90 threaded intake, 125mm long Includes two different outlet hose tail configurations - Straight and 90.
  • Compact, efficient, long life motor Rustproof and corrosion resistant Stainless steel shafts suitable for fresh or salt water Extra length for thicker transom.
  • High-impact durable plastic housing Extremely efficient, very low current draw and offer high capacity output Water cooled long-life motors.
  • Ignition protection to protect the pump against high current Water/moisture tight seals Silent and vibrationless operation Anti-airlock protection.
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

CZC AUTO Wheel Bearing Buddy 1.98 Inch Bearing Protectors with Protective Bras for Trailer Boat, Chromed, Pair

  • Fitting Size: CZC AUTO Bearing Protectors fit 1.98 inch hub grease cap bore diameter (Please measure your hub bore size before ordering).
  • Universal Fitment: 2 Pack Bearing Buddies for trailers prevent wheel bearing failure on boat, RV, snowmobile, ATV and utility trailers.
  • Main functions: 1. Keep water, dirt or road grime out of wheel hubs and bearings. 2. Maintain pressure and keeps bearing greased.
  • Chrome-plated Steel Housing: Make the 1.98 inch trailer bearing buddy rustfree & corrosion resistant, ensures longer-lasting fit.
  • CZC AUTO - Reliable Brand in Bearing Buddy Industry. We offer 30-day money-back for any reason, 12-month warranty for quality-related issues. Any issue in using, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

Livewell Pump, 12V 800GPH 4.0A Live Bait Tank Aerator Submersible Cartridge Boat Bilge Pump

  • The internal anti-airlock fins ensure even flow of water to your livewell smaller profiles to fit in more confined spaces. The cartridge is easy to remove for cleaning or replacement..
  • Compact, efficient, long life motor rustproof and corrosion resistant stainless steel shafts suitable for fresh or salt water. Extra length for thicker transom..
  • Pump is fully submersible and utilizes tin-coated, 16-gauge wire for safety 90° threaded intake, 125mm long. Includes two different outlet hose tail configurations – Straight and 90°..
  • High-impact durable plastic housing extremely efficient, very low current draw and offer high capacity output water cooled long-life motors.
  • Ignition protection to protect the pump against high current. Water/moisture tight seals. Silent and vibrationless operation. Anti-airlock protection..
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Water Cooled Er20 Collet Chuck CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Water-cooled Motor Spindle and Matching Inverter.
  • Four bearing in our spindle motor (2pcs 7005+2pcs7002).
  • 2.2kw Water-cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock

PENNZOIL Marine TC-W3 2 Cycle Engine Motor Oil 1 qt.

  • For outboard, water cooled & air cooled 2-cycle engines.
  • Including those calling for 100:1 fuel to oil ratio, & all air cooled 2-cycle engines requiring an NMMA TC-W, TC-W11 or TC-W3.
  • Exceeds requirement of water cooled outboards and air cooled engines at heavy loads and high speeds for long periods.
Check Stock

SRC16 Sealmaster New Ball Bearing Cartridge Unit

  • Cartridge block with ball bearing insert for use with cylindrical bore housings.
  • Steel cartridge housing and single-row radial ball bearing for applications that support high radial loads.
  • Relubricatable solid one-piece cartridge housing for maximum strength and rigidity.
  • Fixed-type bearing with two set screws set apart at 120 degrees for secure attachment to a cylindrical shaft.
  • Felt labyrinth seal for protection against contaminants, and for less drag and heat generation than heavy contact seals.
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

Industrial Black Metal Furniture Legs,Black Cast Iron Table Legs,RetroHeavy Duty Square Tube Desk Legs,Metal Dining Coffee Work Table Bench Furniture Legs,Set of 2

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock