Categories

Best Bearing Thrust Washers

MRC R4AFF Small Ball Bearing, Double Shielded, No Snap Ring, Inch, 1/4\ ID, 3/4\ OD, 27000 rpm Max RPM, 261 pounds Static Load Capacity, 632 pounds Dynamic Load Capacity

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

DNJ TW500 Thrust Washer For 85-01 Chevrolet, Suzuki, Geo, Metro, Swift, Samurai, Sidekick, Sprint,1.0L-1.3L, L4, L3, SOHC, DOHC, Naturally Aspirated, Turbocharged

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

DNJ TW950 Thrust Washer For 88-04 Toyota, Lexus, Tacoma, Tundra, 4Runner, T100, Pickup, ES300, Camry, ES250, 2.5L-3.4L V6, DOHC, SOHC, Naturally Aspirated

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

MOSNAI Golf Cart Front End King Pin Repair Kit for Club Car DS 1981-Up Gas/Electric Golf Cart OEM# 1016386/1010150/1016389/8067/7048（Pack of 2）

  • ✅【Fit Models】The front end king pin repair kit for Club Car DS 1981-up G&E Golf Cart, fit Delta A plate + nut..
  • ✅【Replace OEM Part】Brand new king pin assembly 1016386, Upper Spindle Bushings 8067, Lower Bushing Flanged 7048, Thrust Bearing Washer 1010150, Kin Pin Wave Washers 1016389..
  • ✅【Function】This king pin repair kit will do your whole cart, for both the driver and passenger sides.Perfect fit, directly replaces worn out original king pins, could improve the front end performance a lot..
  • ✅【High Quality】 Well made, meets OEM specifications, please carefully check the year, model and serial number of your golf cart before purchasing..
  • ✅【Package Content】 2 x DS King Pin Assembly, 2x Upper Spindle Bushings, 2x Lower Spindle Bushings, 2x Thrust Bearing Washer, 2x Kin Pin Wave Washers,2 x Hex Locking Nut..
Check Stock

All Balls 28-1005 Swing Arm Bearing Kit

  • Specs: Swing Arm Bearing Kit, Needle Bearings 52100 bearing steel ARC6.
  • POM composite washer bearings replace thrust needle washers for superior resistance twater and dirt and increased service life.
  • Compatible With/Replacement For: Suzuki LT-250R 1985 - 1992, LT-500R 1987 - 1990.
  • 100% New aftermarket Swing Arm Bearing Kit built to meet OEM specifications.
Check Stock

2 Sets AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width

  • Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm).
  • Material: Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration and noise.
  • Features: Needle Roller Thrust Bearings can accommodate axial loads in one direction only.Combined with 2 washers for applications where adjacent machine components cannot serve as raceways..
  • Capability:45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
  • Package contents:2 x bearing,4 x bearing washers..
Check Stock

Prox Racing Parts 03.1334 Connecting Rod Kit

  • ProX connecting rod kits are made out of the toughest alloys available today.
  • Original equipment specifications and tolerances are meticulously maintained.
  • Complete with crankpin, big-end bearing, top-end bearing and thrust washers.
  • ProX connecting rods have a special surface treatment to improve strength and increase fatigue durability.
Check Stock

H-Beam Connecting Rods for Toyota Supra MK4 2JZ-GE 2JZ-GTE 2JZ

  • Double honed bearing surfaces provide absolute reliability at high RPM.
  • Increased wrist pin lubrication with double drilled small end.
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication.
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes.
Check Stock

MEETOOT 6 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers 3/4

  • The needle roller thrust bearing can only bear axial load in one direction.
  • Used in combination with two thrust washers for applications where adjacent machine components cannot be used as raceways.
  • Steel cage guide rail and evenly distributed rollers to reduce friction, vibration and noise.
  • The hardened chromium steel roller has heat resistance and durability under heavy load.
  • Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.
Check Stock

Wiseco Bottom End Rebuild Kit for Yamaha BLASTER 200 1988-2006

  • Complete gasket set with all engine seals and O-rings..
  • OEM grade main bearing for ultimate smooth operation..
  • Double forged for ultimate strength and durability..
  • Shot peened to remove residual stress and smooth surface blends..
  • Coated bronze thrust washers with dimpling to improve oil retention and reduce friction..
Check Stock

uxcell AXK3552 Thrust Needle Roller Bearings with Washers 35mm Bore 52mm OD 2mm Width

  • [MODLE] - Bearing Model: AXK3552 (I.D.=35mm, O.D.=52mm, Thickness=2mm, Thickness with Washers: 4mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axially loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 80.1kN Static Load Capacity, 16.9kN Dynamic Load Capacity, 5500RPM Maximum Rotational Speed.
Check Stock

uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width

  • [MODLE] - Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm, Thickness with Washers: 4mm).
  • [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise.
  • [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only.
  • [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways.
  • [CAPABILITY] - 45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
Check Stock