Categories

Best Bearing Unit

WQAZ Sealed Ball Bearings 2Pcs/Set UCP201 Ball Mounted Bearings Pillow Block Bearing Cast Housing Bearing OD 40mm ID 12mm Less frictional Noise

  • Made of bearing steel and cast iron shell, high hardness and durable..
  • Pillow block bearing is a kind of bearing unit which combines rolling bearing and bearing block, which has good versatility and interchangeability..
  • Two-bolt housing with ball bearing insert for ready-to-mount installation..
Check Stock

Wrench Rabbit New Complete Engine Rebuild Kits for Yamaha R Raptor (05-13), YFM 350 X Warrior (87-04) WR101-209 , Black

  • Vertex Piston Kit standard compression piston, rings, pin and clips. Hot Rods Heavy Duty crank stock stroke - includes wrist pin bearing for two strokes. Hot Rods main bearing/seal kit Hot Rods transmission bearing kit includes transmission bearings, output shaft collar and sprocket lock washer. Hot Rods counter balancer bearing. Kit Hot Rods water pump bearing and seal kit. Vertex complete gaskets kit including seals and O-ring kit (covers top and bottom). Hot Cams cam chain..
  • Fit: Convenient one stop shop in a box! Kit contains oversized +0.5mm piston kit, heavy duty crankshaft, main bearing and seal kit, balancer bearing kit, transmission bearing kit, waterpump bearing and seal kit, complete gasket and seal set, and cam chain (if applicable).
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

RNU205E Cylindrical Roller Bearing Harley Davidson 9135 Inner Primary Mainshaft

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

NU1008 Cylindrical Roller Bearing 40x68x15 Cylindrical Bearings

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

[2-Pack] SBTRD204-12 - 3/4\ Bore 3-Bolt Mounted Flange Block Unit, Bearing SB204-12G, Cast Iron Housing TRD204, Bolt Size M8 (0.3125 inches)

  • ✔️ [Parts] - 3-Bolt Mounted Flange Block Unit.
  • ✔️ [Insert Bearing] - Bearing Number SB204-12G, Inner Diameter 3/4".
  • ✔️ [Housing] - Cast Iron Housing TRD204.
  • ✔️ [Quantity in Package] - 2 Pieces of 3-Bolt Mounted Flange Block Unit.
Check Stock

Bobrick - B-7120 - Trimline 208-240V Surface-Mount 22 ga Stainless Steel Hand Dryer

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

Bobrick 7128 TrimLineSeries 304 Stainless Steel ADA Surface-Mounted Automatic Hand Dryer, Satin Finish, 115V

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

2Pack 9\ Lazy Susan Hardware 5/16 Thick Turntable Bearings 750lbs Load Capacity Lazy Susan Turntable Swivel Plate Base for Rotating Table, Kitchen Storage, Serving Tray, Corner Shelves, Book Rack

  • Heavy Duty Lazy Susan Bearing: Made of premium galvanized steel, the bearings are zinc-plated for corrosion resistance, and have a load capacity of 1000 pounds..
  • 360 Degrees Rotating Plate Size: Pack of 2, size 9” diameter x 5/16" thick, heavy duty turntable suitable for 15”-30” workbench. 360 Degree interlock prevents separation of moving parts. Bearing is interlocked for lifetime of unit. No rivet to work loose or bind..
  • Smoothly and Quietly Lazy Susan Bearing: Swivel bearing has a deeper race groove which encapsulating the balls effectively and allowing them to move more smoothly..
  • Easy to Install: Lazy Susan Swivel has pre-punched holes for easy installation, interlocked lazy Susan unit glides smoothly on ball bearings and maintains maximum stability, even under heavy loads..
  • Wide Application: Ideal for residential or commercial applications, the Lazy-Susan Turntable assists cabinets or displays with movement. Perfect for rotating or swiveling TVs, book racks, serving trays, kitchen storage racks and more. It can handle a load of up to 1000 lbs. and is durably constructed with rust-resistant metal..
Check Stock

Bestar Versatile Closet Organizer 108W White

  • GOOD QUALITY: Made from quality laminated particle board compliant with TSCA Title VI. Finished with attractive molding. Satin nickel knobs on the drawers..
  • ORGANIZATION SOLUTION: The base unit has 2 adjustable shelves and 1 clothing rod. The bridge comes with 1 clothing rod. The base unit and the bridge must be in the center, with a 36” unit on each side..
  • GOOD STORAGE: Each 36” unit comes with 2 fixed shelves (including base), 3 adjustable shelves, and 2 clothing rods. A 3-drawer set on ball-bearing slides is included for one of the 36” units..
  • 10-YEAR LIMITED WARRANTY: Warranted to the original owner against defects in materials or workmanship..
  • MADE IN NORTH AMERICA: Excellent customer support. Assembly required (2 people). Configure the organizer by removing some of the adjustable shelves. It is possible to add a 3-drawer set to the base unit (product number: 40161)..
Check Stock

Bobrick 7128 TrimLineSeries 304 Stainless Steel ADA Surface-Mounted Automatic Hand Dryer, Satin Finish, 115V (Pack of 2)

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

Bobrick 7128 TrimLineSeries 304 Stainless Steel ADA Surface-Mounted Automatic Hand Dryer, Satin Finish, 115V (Pack of 4)

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

Bobrick 7120 TrimLineSeries Zinc-Plated Steel ADA Surface-Mounted Automatic Hand Dryer, White Epoxy Finish, 115V

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock