uxcell SCS12UU Linear Ball Bearing Slide Block Units, 12mm Bore Dia (Pack of 4)
- Model: SCS12UU (Bearing No.: LM12UU, Nominal Shaft Diamter (dr): 12mm).
- Aluminium Alloy Linear Ball Bearing Slide Block Units.
- Light-weight housing and Chromium Steel bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stockuxcell SCS8UU Linear Ball Bearing Slide Block Units, 8mm Bore Dia (Pack of 4)
- Model: SCS8UU (Bearing No.: LMF8UU, Nominal Shaft Diamter (dr): 8mm).
- Aluminium Alloy Linear Ball Bearing Slide Block Units.
- Light-weight housing and Chromium Steel bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock
Outboard Trim/Tilt Pin Wrench Tools Set - MT0004 & MT0006 & MT0009 Fit for Yamaha Suzuki Johnson Evinrude
- Application -- Compatible with Mercruiser Alpha Alpha 1 MR Bravo OMC Cobra Volvo. With this tools set, you could replace gimbal bearings and hinge pins..
- Gimbal Bearing Puller -- This bearing puller remover can easily remove the gimbal bearings on bell housings by turning the end of the tool with a wrench..
- Gimbal Bearing Installer -- Used to install the new gimbal bearing back, set the bearing on the installer than insert the installer in engine. Also it can be used to check engine coupler alignment with the gimbal bearing and drive..
- Hinge Pin Tool -- This tool is used to remove and install hinge pins for Mercruiser drive units. It can separate the housing from the gimbal ring on the hinge pin bolt..
- High Quality -- Our tool set is made of premium solid steel with nice black Oxide finish which is anti-corrosion and rustproof. The tools are specially hardened for added strength and impact protect. So the product can be durable and service a much longer time..
Check StockAeroCool Shark 140m White Cooling Fan EN55512
- Unique and Stylish Shark Fin like 15 Fan Blades design with 4 Blue LEDs Shark 140mm White Fan.
- Innovative Fluid Dynamic Bearing delivers longer life span with higher precision rotation and anti-shock function.
- Include a Voltage reduction cable allow fan to perform in Duo Mode Operation either in Power mode or Silence mode.
- Accessories include a Voltage Reduction cable and a 3 to 4 pin converter cable and 4 units of Anti-vibration Rubber Screws and 4 units of standard screws.
Check StockAeroCool Shark 120mm Red Cooling Fan EN55437
- Unique and Stylish Shark Fin like 15 Fan Blades design with 4 Blue LEDs Shark 120mm Red Fan.
- Innovative Fluid Dynamic Bearing delivers longer life span with higher precision rotation and anti-shock function.
- Include a Voltage reduction cable allow fan to perform in Duo Mode Operation either in Power mode or Silence mode.
- Accessories include a Voltage Reduction cable and a 3 to 4 pin converter cable and 4 units of Anti-vibration Rubber Screws and 4 units of standard screws.
Check StockAeroCool Shark 140mm Red Cooling Fan EN55475
- Unique and Stylish Shark Fin like 15 Fan Blades design with 4 Blue LEDs Shark 140mm Red Fan.
- Innovative Fluid Dynamic Bearing delivers longer life span with higher precision rotation and anti-shock function.
- Include a Voltage reduction cable allow fan to perform in Duo Mode Operation either in Power mode or Silence mode.
- Accessories include a Voltage Reduction cable and a 3 to 4 pin converter cable and 4 units of Anti-vibration Rubber Screws and 4 units of standard screws.
Check Stock
Upper & Lower Bearing Carrier Puller with Fuel Water Separator Wrench for Yamaha, for Johnson, for Evinrude, for Mercury, for Honda
- APPLICATION -- All fit for Yamaha. ①Upper Bearing Carrier Puller - Fit For Yamaha, Johnson, Evinrude, Suzuki, for Honda and Mercury upper bearing carrier (NOTE: with carrier style upper bearing housing)②Lower Bearing Carrier Puller - Fits For Yamaha, Johnson, Evinrude, Mercury (DOES NOT FIT VERADO), for Honda, Mercruiser.③Wrench - Fit For Yamaha Outboard Motors 2006 Serial Number 0406 To Current. Fits Yamaha 4-Strokes 150 to 350 HP, HDPI 2006+.
- FUNCTION -- ①Puller works wonderfully for removing the bearing carrier oil seal and other tasks where a bearing puller is needed.②Wrench is specially designed to remove fuel water separator cup..
- BENEFITS -- ①Save time and No more prying against seal surfaces. Removes toughest Lower bearing carriers effortlessly with no damage to the carriers.②Safely removes fuel water separator cup from filter assembly without damaging delicate plastic parts and avoids tangling in the water sensor wiring..
- ADJUSTABLE -- Fits most gearcases 115hp and above. Adjustable arms allows it to be used on a variety of different sized outboard and outdrive / stern drive lower units..
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 mon....
Check StockAeroCool Shark 120mm Black Edition Cooling Fan EN55413
- Unique and Stylish Shark Fin like 15 Fan Blades design with 4 Blue LEDs Shark 120mm Blue Fan.
- Innovative Fluid Dynamic Bearing delivers longer life span with higher precision rotation and anti-shock function.
- Include a Voltage reduction cable allow fan to perform in Duo Mode Operation either in Power mode or Silence mode.
- Accessories include a Voltage Reduction cable and a 3 to 4 pin converter cable and 4 units of Anti-vibration Rubber Screws and 4 units of standard screws.
Check Stockuxcell LMK8UU Extra Long Square Flange Linear Ball Bearings, 8mm Bore Dia, 15mm OD, 45mm Length(Pack of 2)
- Model: SCS20UU (Bearing No.: LMF20UU, Nominal Shaft Diamter (dr): 20mm).
- Aluminium Alloy Linear Ball Bearing Slide Block Units.
- Light-weight housing and Chromium Steel bearing ball, good abrasion resistance, high precision and good strength.
- Smooth moving, low friction, high rigidity and long working life.
- Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check StockVertical Spice - x11 Bundle DC - Spice Rack/Storage Organizers - 3 Product Combination Kit 222x2x11 33x1x11 & 6x1x11 - All Units Made in USA
- PATENTED DESIGN – QUALITY MADE IN THE USA - 3 Popular Units Sold Together - Spice Rack and Storage Drawers.
- A COMBINATION OF 6 DRAWERS - (3) 2.1", (2) 3.25" and (1) 6.7" wide x 10.05" long drawers glide on chrome steel ball-bearing slides. The fronts and....
- VERY EASY INSTALL - A screwdriver is the only tool. Arrive assembled and include mounting screws. FLEX-SIDES set us above the rest (a mini bungie) -....
- THREE UNITS COMBINED SIZE: 10.60" deep x 20.7" wide x 10.75" tall. DEPTH = back of the cabinet to inside the closed door. WIDTH = between the hinges.....
- MOUNT ALL 3 UNITS SIDE BY SIDE OR SEPARATELY. The Bundle is priced less than buying the 3 units individually..
Check Stock16 PCS 5/8 Inch Roller Ball Transfer Bearings,Flange Mounted Round Ball Transfer Unit Universal Rotation Ball Casters for Conveyor,Roller Stand,Transmission
- Each ball transfer roller with a load capacity of 33 lbs..
- 16 Pcs 5/8 inch diameter ball bearing rollers with 360-degree rotation..
- The bearing units were made of high-quality carbon steel, strong and durable, good wear resistance and not easy to wear out..
- The ball transfer table support cup is hardened and plated..
- Protective cover assures low torque and longevity..
Check Stock4-Pack Antrader Two-Hole Flange Mounted 1-inch Nylon Ball Transfer Unit Bearing Conveyor Roller Casters, 66lbs Load Capacity
- Each ball transfer roller with a load capacity of 400 lbs..
- The bearing units were made of high quality carbon steel, strong and durable, good wear resistance and not easy to wear out..
- Two screw holes, Mounting Hole Dia: 5.6mm/0.2-inch..
- Widely used in conveyor lines installing, home appliance, transmission system, processing system, wooden case, transmission furniture, workbench, etc..
- Package included: 8 Pcs 1 inch diameter ball bearing roller, 360-degree rotation.
Check Stock10Pcs 1/3\ Mini Nylon Ball Transfer Bearing Unit 0.34mm Table Conveyor Roller Ball for Transmission, Furniture,Wheelchair- 1/3inch
- 【CAPACITY】Each ball transfer roller with a load capacity of 33 lbs..
- 【SIZE】16 Pcs 5/8 inch diameter ball bearing roller, 360-degree rotation..
- 【Material】The bearing units were made of high quality carbon steel, strong and durable, good wear resistance and not easy to wear out..
- 【MOUNTING】Two screw holes, Mounting Hole Dia: 4mm/0.16-inch..
- 【APPLICATION】Widely used in conveyor lines installing, home appliance, transmission system, processing system, wooden case, transmission furniture, workbench, etc..
Check Stock
