Categories

Best Bearing Washers

Independent Skateboard Hardware 1\ Phillips Black/Red 8 Nuts and Mounting Bolts

  • Includes 8 axle washers and 4 axle nuts from Dimebag Hardware..
  • Speed washers increase speed and promote longer bearing life by reducing friction between the bearing and axle nut and hangar..
  • Having brand new lock nuts will keep your wheels from falling off. The more you replace your wheels and bearings, the more the axle nuts wear out and lose their ability to stay tight. These fresh new nuts will keep you locked up! Produced with top quality materials. The thread size for these axle nuts is 5/16"..
  • This kit features products that are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size)..
  • The 4 locknuts and 8 washers included are enough to outfit 2 trucks..
Check Stock

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 1/2 Qty 25

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 3/8 Qty 250

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 3/8 Qty 100

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

Belleville Washers Conical Disc Spring Cup Washers 18-8 Stainless Steel 5/8 Qty 25

  • Also referred to as Belleville Washers, Disc Springs, Spring Washers, Conical Washers, Cupped Spring Washers, or Conical Spring Washers.
  • Used to apply a flexible pre-load to a bolted joint or bearing - Can be used in a stack below the bolt head to apply a greater pre-load.
  • Corrosion resistant 18-8 stainless steel.
  • Variety of uses including vibration reduction and pressure indicators.
  • Commonly used in automotive applications, aerospace, vehicles and general machinery.
Check Stock

2 Sets AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width

  • Bearing Model: AXK2035 (I.D.=20mm, O.D.=35mm, Thickness=2mm).
  • Material: Chromium steel rollers for heat tolerance and durability under heavy loads.
  • Steel cage guides and evenly spaced rollers for reduced friction, vibration and noise.
  • Features: Needle Roller Thrust Bearings can accommodate axial loads in one direction only.Combined with 2 washers for applications where adjacent machine components cannot serve as raceways..
  • Capability:45.6kN Static Load Capacity, 12.9kN Dynamic Load Capacity, 8500RPM Maximum Rotational Speed.
  • Package contents:2 x bearing,4 x bearing washers..
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Southwest Wheel 5,200 lbs Trailer Axle Self Adjusting Electric Brake Kit

  • Pair of TruRyde 12" x 2" 6-5.5" bolt circle hub and drums 25580 inner bearing 15123 outer bearing.
  • Pair of TruRyde 12" x 2" self adjusting electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
  • Comes with TruRyde bearings, seals, lug nuts, grease caps, cotter pins, spindle washers, spindle nuts, and brake mounting washers and nuts.
  • Built for 42 spindles with a 5 hole brake flange.
Check Stock

Hillman 830502 Flat Washer, Stainless-Steel

  • Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer.
  • These washers help to prevent bolts or nuts from pulling through a surface.
  • Stainless steel coating for a corrosion resistant finish.
Check Stock

100#8 Countersunk Finish Washer Black Zinc Plated Brass

  • Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
  • Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
  • Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
  • Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
  • Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..
Check Stock

18-8 Stainless Steel 1/4\ Flat Washers (100 pcs) Black Oxidized in USA by Makers Bolt

  • SIZING: Fits 1/4" fasteners | Inside Diameter: 9/32" | Outside Diameter: 5/8" |Thickness: 0.050" | Quantity: 100 Pieces per package.
  • CERTIFIED STAINLESS STEEL: Made from 18-8 (304) premium stainless steel, our fasteners are tested and certified to ensure the washers you receive are grade 18-8 stainless and meet size specifications..
  • BLACK OXIDE: These stainless washers are proudly black oxidized in the USA to military specifications, giving the washers a sleek look and added corrosion and abrasion resistance..
  • PROJECT CENTER: These metal washers are great for exterior household and industrial applications such as washers for screws or washers for bolts outside to increase the bearing capacity and protect the material under the washer..
  • SHOP WITH CONFIDENCE: Makers Bolt proudly finishes and packages these fasteners in the USA ensuring quality and conformance to specifications..
Check Stock