Categories

Best Bearings Housings

DA YUAN Universal Press and Pull Sleeve Remove Install Bushes Bearings Garage Tool Kit

  • Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines.
  • Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10. M12. M14. M16).
  • Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings.
  • Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool.
  • Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear safety glasses and gloves . Any question or problem, feel free to contact us.
Check Stock

Redcat Racing Everest-10 Electric Rock Crawler with Waterproof Electronics 2.4Ghz Radio Control 1/10 Scale Blue

  • Featuring aggressive bead-lock rock crawling tires, four aluminum Capped oil filled shocks, and complete ball bearings throughout.
  • Featuring tough axle housings front and back.
  • Long travel coil-over shocks to prevent leaks.
  • Removable bead lock wheels provides added grip to ensure that tire stays firmly planted on the rim when crawling.
Check Stock

Outboard Trim/Tilt Pin Wrench Tools Set - MT0004 & MT0006 & MT0009 Fit for Yamaha Suzuki Johnson Evinrude

  • Application -- Compatible with Mercruiser Alpha Alpha 1 MR Bravo OMC Cobra Volvo. With this tools set, you could replace gimbal bearings and hinge pins..
  • Gimbal Bearing Puller -- This bearing puller remover can easily remove the gimbal bearings on bell housings by turning the end of the tool with a wrench..
  • Gimbal Bearing Installer -- Used to install the new gimbal bearing back, set the bearing on the installer than insert the installer in engine. Also it can be used to check engine coupler alignment with the gimbal bearing and drive..
  • Hinge Pin Tool -- This tool is used to remove and install hinge pins for Mercruiser drive units. It can separate the housing from the gimbal ring on the hinge pin bolt..
  • High Quality -- Our tool set is made of premium solid steel with nice black Oxide finish which is anti-corrosion and rustproof. The tools are specially hardened for added strength and impact protect. So the product can be durable and service a much longer time..
Check Stock

BESTOOL Gimbal Bearing Puller | Mercruiser Alignment Tool | OMC Heavy Duty Bearing Puller for OMC/Mercruiser Alpha/Alpha one/Bravo

  • STURDY & DURABLE:This puller alignment tool is made of solid pieces of steel. It can be a lifetime tool that will last longer..
  • WEAR PREVENTION:This gimbal bearing tool supports proper alignment that prevents wear on the bearing, drive, and coupler..
  • ALIGNMENT CHECK:Our bearing installer puller can be used to check engine coupler alignment with the gimbal bearing and drive..
  • EASY TO USE:After assembling, the seal bellow expander tool works just as well as the one-piece tools, which can save space in this way..
  • VARIOUS APPLICATION: This GIMBAL bearing puller tool will remove bearings on Mercruisers, OMC, and Cobra Bell Housings..
Check Stock

SCITOO Fit Cars LCV and HGV Engines Universal Press and Pull Sleeve Kit Removal Installation Bushes Bearings Tool Kit

  • Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines.
  • Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and....
  • Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings.
  • Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting....
  • Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear glasses and gloves . Any question or....
Check Stock

Juno Lighting 27HZ-WH LED Tapered Downlight Cone Trim, 6-Inch, White Trim with Haze

  • Juno trim series 27 is designed for a 6-inch juno housing and has an aperature of 5.75 inches. Perfect when paired with incandescent and LED juno housings.
  • Airtight and energy Star when paired with select housings - see spec sheet for complete List.
  • Compatible with IC22, IC22 W, IC22S, IC22R incandescent housings with 5W PAR30, 75 PAR30L or 65W BR30 light bulbs.
  • Compatible with IC2, TC2, TC2R housings and can be used with 50W PAR30, 75 PAR30L or 65W BR30 Light bulbs.
  • Compatible with IC22LED, IC22RLED and TC22LED LED housings.
Check Stock

Double Canister Plastic Bracket for 2 Slimline Filter Housings - U-shaped

  • Bracket to be used with 10″ slimline filter housings (fits all brands of housings).
  • Economical plastic construction is light’weight, yet still very durable.
  • Housings can be mounted with ports facing to the side or to the front.
  • Commonly used with drinking water and reverse osmosis systems.
Check Stock

Culligan UB-1 Mounting Bracket with Screws

  • Mounting bracket for Culligan Whole House Sediment Water Filter HF-360 (1653-3325).
  • The Culligan UB-1 single housing bracket is a “U” shaped mounting bracket for 3/4″ inlet/outlet standard whole house housings..
  • The UB-1 mounts standard whole house water filter housings and helps support the weight of the water filter..
  • Screws are included with the UB-1 mounting bracket for securing the water filter housing to the wall. The screws are No.10 1-1/2″ pan head screws..
Check Stock

HALO E750ICATLT560WH6930-4PK LT 6 in. New Construction IC Housing and Dimmable White Integrated Ceiling Light Retrofit Kit (4-Pack) LED Recessed Trim

  • Housings: pass-n-thru bar hangers that can be shortened for use in joist spans of less than 12 in. without having to remove them from the plaster frame.
  • Housings: patented got nail bar hanger system has precisely aligned pre-installed nails.
  • Housings: self-leveling flange reduces installation time.
  • Housings: 3-quick-connect connectors eliminate need for separate wire nuts-simply strip wires and push in.
  • Housings: slide-n-side system is pre-installed tool-less strain relief which eliminates purchase of additional connectors.
Check Stock

AIP Electronics Dragon Fire Performance Black Out Pro Series Ready to Run Ignition Distributor Compatible with Ford 221 255 260 289 302 302W V8 OEM Fit DFD1008ABK

  • FITMENT: Ford 221 255 260 289 302 302W **Be Sure to Check for Correct Fitment Using the Chart Above. Don't See a Chart? Message us for assistance..
  • FEATURES: CNC machined aluminum for exact fit highly durable non-corrosive housings, .50" drive shafts, heavy duty bearings, harden steel internals, Dragon Fire Performance electronics, adjustable mechanical advance (bushings included), and Brass terminals. Comes exactly as pictured..
  • DIRECT FACTORY FIT: Ready for Installation straight out of the box. Comes complete with installation guide for easy DIY install..
  • EASY DIY: Simple three wire plug and play connection NO CDI box required. Perfect for any weekend or professional mechanic..
Check Stock

Halo SLDACCKIT SLD Series Replacement kit, Grey

  • Use for installation of SLDSL4 or SLDSL6 into recessed housings.
  • Includes E26 adapter, torsion springs, & friction blades.
  • Mount torsion springs to SLDSL6 bracket for 5" or 6" housings.
  • Mount friction blades to SLDSL4 bracket for use in 4" housings.
Check Stock

Pentair Pentek SW-3 Spanner Wrench for 10\ Big Blue Housings

  • COMPATIBLE WITH PENTAIR PENTEK 10" BIG BLUE HOUSING SUMPS and most other 10" heavy duty housings.
  • EASILY REMOVES FILTER HOUSINGS for quickly changing water filter cartridges.
  • HELPS LOOSEN STUCK OR JAMMED FILTER HOUSINGS.
  • SUITABLE FOR USE in installing or replacing filter cartridges.
  • CONSTRUCTED OF DURABLE PLASTIC for stability and resistance to corrosion.
Check Stock

Pentair Pentek SW-4 Spanner Wrench for 20\ Big White Housings

  • COMPATIBLE WITH PENTAIR PENTEK 20" BIG BLUE HOUSING SUMPS and most other 20" heavy duty housings.
  • EASILY REMOVES FILTER HOUSINGS for quickly changing water filter cartridges.
  • HELPS LOOSEN STUCK OR JAMMED FILTER HOUSINGS.
  • SUITABLE FOR USE in installing or replacing filter cartridges.
  • CONSTRUCTED OF DURABLE PLASTIC for stability and resistance to corrosion.
Check Stock