Categories

Best Bed Type Milling Machine

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • 【BASIC PARAMETERS】GPOAS X-Axis power feed is made of aluminuml.
  • Power Parameter:90Watt,110V input voltage,50/60Hz,single phase.
  • Rotate Speed:0-200 RPM.Max Torque:450in-lb.
  • Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc....
  • 【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance..
  • 【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
  • 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting....
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

Aluminum Alloy Mini Handwheel Mechanical Hand Wheel 50mm (50x8mm)

  • Material: The lathe milling hand wheel of the lathe is made of high-quality bakelite, with strong insulation and durability.
  • Easy to install: The hand wheel has a detachable rotating handle, and the hand wheel has screw holes for easy handle installation.
  • Application: Revolving handle hand wheels are widely used in industrial machine tools, such as milling machines, lathes, grinders, etc.
  • Features: New type, convenient movement of the milling handle hand wheel, strong carrying capacity.
  • Unique design: This plastic lathe hand wheel is a rear corrugated hand wheel design, which is convenient to replace one of the broken lathes.
Check Stock

CGOLDENWALL Upgraded Electric Grain Grinder Mill High-speed Spice Herb Mill Commercial powder machine Dry Cereals Grinder CE 3000W (1000g Swing Type)

  • 【Convenience】 With timer function, you can adjust the fineness of crushing by time setting..
  • 【Safety】Upgraded Open-Cover-Stop type. When open the cover, the machine will automatically stop, making the operation safer and more compliance with ergonomics.With overload protection function, when overwork is turned on, it automatically turns off and restarts easily. There is buckle design, there is no powder leakage during milling..
  • 【High Speed】 With swing type milling and copper electric machinery, the material can be grind into fine power in just one minute..
  • 【Fine grinding】Triples blade: grinding blade, rotary blade, and powder removal blade, can be pulverized easily. Crushing fineness reaches from 30 to 300 mesh..
  • 【Applied to various materials】 It is applied to milling work of dried food such as herbal medicine ( Sanqi ,Ejiao, …), cereal (red bean,mung bean …), spice (chilli, octagon …)..
Check Stock

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

  • X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
  • Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
  • High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
  • Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
  • Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

CGOLDENWALL Stainless Steel Safety Upgraded Electric Grain Grinder Mill High-speed Spice Herb Mill Commercial powder machine Powder Machine Dry Cereals grain Herb Grinder CE 3600W (2500g Swing Type)

  • 【Safety】Upgraded Open-Cover-Stop type. When open the cover, the machine will automatically stop, making the operation safer and more compliance with ergonomics.With overload protection function, when overwork is turned on, it automatically turns off and restarts easily. There is buckle design, there is no powder leakage during milling..
  • 【Applied to various materials】 It is applied to milling work of dried food such as herbal medicine ( Sanqi ,Ejiao, …), cereal (red bean,mung bean …), spice (chilli, octagon …)..
  • 【High Speed】 With swing type milling and copper electric machinery, the material can be grind into fine power in just one minute..
  • 【Super-Fine grinding】Triples blade: grinding blade, rotary blade, and powder removal blade, can be pulverized easily. Crushing fineness reaches from 30 to 300 mesh..
  • 【Convenience】 With timer function, you can adjust the fineness of crushing by time setting..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

ER32 Collet Chuck Wrench Carbon Steel ER32 Collet MT4 Collet Chuck Holder Milling CNC Lathe Tool with ER32 Wrench

  • ☀ [FEATURE] --- ER straight extension rod, long shaft, suitable for deep hole machining. Straight-type handle body for holding small drilling, milling tools..
  • ☀ [PRACTICALITY] --- You can reduce the use of longer tools, which can reduce costs and improve efficiency. Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • ☀ [HIGH STRENGTH] --- ER32 Collet Holder is made of durable carbon steel, high accurate, tighten the nut straight, high rigidity, strong clamping..
  • ☀ [APPLICATION] --- Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • ☀ [QUALITY ASSURENCE] --- If you have any question or need some suggestion about the products we sold, please feel free to contact us, we will provide you with quality after-sales service..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Yakamoz 10 Pack 1/8" Shank Spiral CNC End Mill Router Bits Upcut Milling Cutters for MDF Acrylic Wood PVC, 4 Flutes, 15mm Cutting Length, Flat End

  • Type: Spiral (Upcut), Cutting Type: 4 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 0.59" (15mm), Overall Length: 1-33/64" (38.5mm).
  • High quality carbide end mill provides good milling & cutting performance to ensure high work efficiency and to maximize worker efficiency..
  • These bits own sharp edge which is able for fast engraving that makes high efficiency, high precision,smokeless and burr-free while processing..
  • For CNC,engraving machine woodworking, carving milling soft and hard wood, plywood, plastics, MDF, PVC, aluminum, composite board, etc..
  • Made of tungsten steel material with industrial quality control to ensure best performance and long life use..
Check Stock

Precise Extension Milling Chuck Holder C16-ER11-35L CNC Extension Rod Milling Holder Straight Shank Chuck Collet for Milling Lathe(6mmshaft Diameter)

  • 【MULTIFUNCTIONAL DURABLE】This milling chuck extension rod is made of high quality metal and has high hardness and is suitable for long-term use and will not affect the accuracy of the work..
  • 【SOPHISTICATED MATERIAL】This milling extension rod is made of high-quality manganese steel, it has high hardness, high rigidity and strong clamping force, suitable for long-term use..
  • 【EFFICICENT PERFORMANCE】This manganese steel milling extension rod can reduce the use of extended cutters, effectively reduce processing costs and improve work efficiency..
  • 【SPECIALIZE HANDLE DESIGN】Straight shank type extended shank with long shank for deep hole machining to solve the need for extended processing depth.With this straight shank this collet chuck rod can apply more lathe turning machine..
  • 【HIGHLY SPECIFIC PRECISION】The outer diameter of the extension rod and other parts are precision ground, eliminating imbalance during cutting and increasing safety..
Check Stock