Best Bellows Seal Globe Valve
Robinair 42160 MANIFOLD PRESSURE TEST KIT 0-35'' W.C.
- Sensitive diaphragm gauge calibrated in inches of water column and ounces per square inch, Improved lamination strength of diaphragm (bellows) to brass plate withstands higher over-pressure, Tube nipple for easy connection to system manifold, Two gauge ranges available, The unique single bellows on brass plate design replaces the double bellows for a stronger seal that resists greater over-pressure.
Check StockExhaust Gasket Fits 2001-2005 Polaris 800 RMK
- Fits 2004-2006 Arctic Cat Sabercat 700 EFI EXT.
- We Use Some Stock Photos For Gaskets Please Do Not Purchase Based On Product Image Alone.
Check StockDante Products FP.GV.PTR Pewter Floor Plate for Dante Globe Valve
- Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
- 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
- The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check StockCardone 66-7259 New CV Axle
- Neoprene boots designed with additional bellows where necessary to reduce stress and ozone cracking.
- Threads and splines are precision rolled for hassle-free replacement.
- 3 percent moly grease provides excellent high temperature characteristics for longer life and better wear.
- Transmission seal diameter is precision machined after heat treatment to ensure correct surface finish, promoting long seal life.
Check StockCardone 66-1325 New CV Axle
- Neoprene boots designed with additional bellows where necessary to reduce stress and ozone cracking.
- Threads and splines are precision rolled for hassle-free replacement.
- 3 percent moly grease provides excellent high temperature characteristics for longer life and better wear.
- Transmission seal diameter is precision machined after heat treatment to ensure correct surface finish, promoting long seal life.
Check StockDante FP.GV.FB Flat Black Floor Plate for Dante Globe Valve - 1/2\ Threaded Mating Valve
- Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
- 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
- The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check StockCASTNOO Brian Tooley Racing for LS Valve Seal Installation Tool 4.8 5.3 5.7 6.0 6.2 Springs
- Application--LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
- Function--Separate Spring Locator is Required, Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
- Easy to install--Easily Install Valve Seals when changing your springs.The last thing you want to do is install valve seals using a socket and hammer.
- This seal installtion tool allows you to slowly press the seal down without damaging the seal..
- 100% Satisfaction Guarantee--If you're not 100% satisfied with this LS Valve Seal Installation Tool, simply return it for a full refund in 30 days.
Check StockHand Duster Puffer For Insecticide Dust Insect Dust Roach Powder Bed Bug Dust
- The Bellow Hand Duster features new design enhancements that make it the “Professional’s Choice” when it comes to crack and crevice treatments of fine dust products into small areas. This bellow hand duster features a new bellows and spring that is much easier to compress and use than other similar dusters on the market. In addition, the clean-out rod comes with an o-ring for a tighter seal to prevent dust from escaping out the back of the duster..
- The Puffer Duster has a 6.5 inch extension makes it easy to treat hard to reach places. The metal extension also features an insulated black tip to prevent a shock hazard when dusting near electrical outlets..
- To use the duster, fill the rubber container (bellows) half-way full with an insecticide dust product such as Delta Dust or Pyganic Dust. It is also recommended to place a small rock in the duster to help break up the dust and prevent it from clumping. Compressing the bellows will cause dust to escape the metal tip of the duster. Using a duster allows you to inject dust more easily into cracks and crevices or inside wall voids where insects like to hide..
- The Puffer Duster is For use in Treating hard to reach areas like cracks, crevices and inside wall voids on any indoor or outdoor space. Re....
Check StockThetford 92860 Porta Potti 135 White
- Award-Winning Portable Toilet for RVs, boats, trucks, vans, healthcare, camping and even off-the-grid lifestyle.
- Modern Appearance in a durable, easy-to-use and clean design, with removable seat and cover.
- 2. 6-gallon Waste Water Holding Tank with rotating Pour-Out Spout and 2. 6-gallon fresh water holding tank.
- Bellows Pump adds water to the bowl, sealed valve keeps odors in holding tank.
Check StockTranspac Resin Cottage Snowman Snow Globe, Set of 3, Assortment
- UNIQUE- Creative Hobbies 5-1/2 inch tall, 130mm wide Clear Plastic Water Globe Snow Globe with Screw Off Cap -Great for DIY Crafts.
- SHATTER PROOF -Snow Globe is clear and sturdy plastic with 3 Inch wide screw off bottom cap and 2.375 Inch Inner Seal..
- FILLABLE - Decorate with paint, fabric, glitter, sharpie markers or fill with artificial snow, candy, photo, mini trees and more!.
- DIY CRAFT - Includes instructions & supply list for making your own snow globe..
Check StockValve Core Removal Tool Set,40Pcs Copper nickel-plated Schrader Valve Cores ,20Pcs O-ring Seal Valve Stem Caps, 3 Pieces Dual Single Head Valve Core Remover Tool Tire Repair Tools
- Package Include : 40Pcs Copper nickel-plated schrader valve cores,20Pcs with rubber-ring Seal valve stem caps,2 x Single Head Valve Core Remover,1 x Dual Head Valve Core Remover Tool.
- Valve Cores: Manufacture of valve cores is fully automated, and all Schrader valve cores are 100% leak-tested. Our fully automated manufacturing allows us to offer zero-defect products.Use of nickel-plated cores prevent galvanic corrosion..
- Valve Tools: Handy tool designed to easily tighten or remove valve cores on bicycles, cars, trunks,and any other air filled tires..
- Valve Caps: Airtight, Leakproof Seal –tire valve caps feature rubber O-rings that create a tighter, more effective seal, so there’s no air leaking on long, tough drives..
- These schrader valve cores is used in any car, truck, motorcycle, bicycle, ATV,and more..
Check StockBrian Tooley Racing BTR LS Valve Seal Kit with Install tool 4.8 5.3 5.7 6.0 6.2 7.0
- Brian Tooley Racing LS Valve Seal Kit, 8 Black Intake and 8 Black Exhaust Seals.
- LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
- Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
Check Stock3.5\ Silver Lined New York City Snow Globe 65mm NYC Souvenir Snow Globes
- UNIQUE- Creative Hobbies 5-1/2 inch tall, 130mm wide Clear Plastic Water Globe Snow Globe with Screw Off Cap -Great for DIY Crafts.
- SHATTER PROOF -Snow Globe is clear and sturdy plastic with 3 Inch wide screw off bottom cap and 2.375 Inch Inner Seal..
- FILLABLE - Decorate with paint, fabric, glitter, sharpie markers or fill with artificial snow, candy, photo, mini trees and more!.
- DIY CRAFT - Includes instructions & supply list for making your own snow globe..
Check Stock