Categories

Best Belt Tensioner Pulley Bolt Tool

GEARWRENCH 15 Piece Ratcheting Serpentine Belt Tool Set - 3680D

  • Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible....
  • Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley.
  • Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access.
  • Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8inch, 1/2inch and 3/4inch Adapters.
  • Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter.
Check Stock

BILITOOLS 15-Piece Universal Ratcheting Serpentine Belt Tool Set

  • Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley..
  • Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
  • Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
  • Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
  • Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..
Check Stock

Dorman 419-602 Idler Pulley Pulley Only Compatible with Select Models

  • Direct replacement - this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified....
  • Restores functionality - reliable replacement for an original pulley that has failed due to vibration or corrosion.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.
  • and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
Check Stock

Dorman 419-617 Accessory Drive Belt Tensioner Pulley Compatible with Select Models

  • Direct replacement - this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications.
  • Restores functionality - reliable replacement for an original pulley that has failed due to vibration or corrosion.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 419-610 Accessory Drive Belt Tensioner Pulley Compatible with Select Models

  • Direct replacement - this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications.
  • Restores functionality - reliable replacement for an original pulley that has failed due to vibration or corrosion.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

3458 A/C Belt Installation Tool Compatible with BMW V8 N62 Engines - BMW Power Steering Pump Drive Belt Tool Same as OEM 641040 & 8380049451

  • 【Fit For】Compatible with BMW N62 (V8) Motors in 2004 through 2006 models with the stretch belt..
  • 【Perfect Design】This BMW A/C Belt Installation Tool is crafted for utilization when no belt tensioner is employed on 2004 to 2006 V8 N62 engines with stretch belts..
  • 【Easy Installation】Easy to installation ,Without this tool, its almost impossible to mount the AC belt. With this tools very easy to install AC belt. install it only took less than five minutes..
  • 【Perfect Tool】The perfect tool for the job of installing BMW A/C belts , if you need to install the A/C belt on your BMW, you need this tool.Tool is a must have if putting a belt on that has no spring assist. Any other way could cause damage to actual pulley..
  • 【Package Included】1* A/C Belt Installation Tool for BMW.
Check Stock

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

  • Fitment – The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ..
  • Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
  • Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
  • SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..
Check Stock

BILITOOLS 15-Piece Universal Serpentine Belt Tool Set, Ratcheting Serpentine Belt Tensioner Tool Kit

  • Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley. Come with red storage case..
  • Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
  • Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
  • Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 22 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
  • Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..
Check Stock

TUCAREST 39155 (For V6 3.5L Only) Accessory Drive Belt Tensioner Pulley Assembly Compatible With 2007-2012 Nissan Altima /2009-2014 Maxima Murano /2011-2012 Quest [# 11955JA10A 11955JA10C]

  • Premium Quality:Made following stringent OE specifications by an OE manufacturer.Each tensioner undergo strict quality control not just before shipping but throughout the production process.During each step of production multiple quality control checks are performed to ensure a long,Trouble-free service life..
  • Perfect Fit:Engineered and tested to match the fit,function and performance of the original tensioner on specified vehicles.It ensures proper belt tension, alignment, and damping for superior performance.Easy to install by direct replacement..
  • Upgraded Durability: Made from high-quality materials for ultimate durability.Torsional round spring design provides reliability as well as consistent tension,eliminate noisy tensioner pulley and no more belt noise..
  • Cost-effective:We are a factory direct sales,Saving your cost.Customers can spend a small amount of money and get high quality Brand new Accessory Drive Belt Tensioner Pulley Assembly and Professional after-sales service..
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter S....
Check Stock

Genuine OEM Subaru Timing Belt Ten Kit Outback Baja Legacy 2.5 SOHC 2000-2009

  • Need a Genuine Subaru Timing Belt Kit for your 2000-2009 Subaru Legacy Outback or Baja sohc 2.5..
  • Timing Belt 13028AA21B X1 Tensioner 13033AA042 X 1.
  • Lip Idler Pulley 13073AA190 X1 Idler Pulley 13073AA142 X1.
  • 2000-2009 Outback and Legacy & Baja (non turbo).
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

Aeromotive 21102 Alternator 32% Overdrive Pulley, Billet, (Serpentine Belt), Ford & GM

  • Fitted with a high quality NTN/NSK Japanese bearing.
  • Replacement of failed original A/C belt tensioner pulley instantly resolves worn bearing squeal and vibration.
  • Manufactured to OE pulley dimensions for proper clearances and belt alignment.
  • High-strength alloy or composite construction withstands intense engine heat and A/C compressor vibration.
Check Stock