Categories

Best Belt driven Series

212CC Torque Converter 6.5 HP 3/4 Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

  • ...utch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
  • 1 x Full Mounting Hardware. Note This is not made by Comet.
Check Stock

Go Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP

  • 40 Series Clutch Pulley Driver Driven 8-18 HP.
  • Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
  • Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
  • Includes: All mounting hardware attached to an easy to mount backing plate.
Check Stock

MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4' Bore 10T #40/41/420 China (Complete 3/4' Torque Converter Set)

  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft..
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors..
  • Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain.
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
Check Stock

Motovecor Go Kart Torque Converter for Predator 212 Clutch Set, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, 3/4' 218353A, (0.75' 10T 40/41)-Upgrade

  • Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end..
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check Stock

BLAST LED - Predator 420CC Go Kart Torque Converter Kit 40 Series Mounting Back Plate 1 Driver Driven Pulley Belt Mounting Hardware 3/4 Driven Pulley

  • 40 series torque converter Kit FITS 8HP - 18HP Engines with a 1" Crankshaft, and 1/4" Keyway: Replaces COMET - 209133, 209133A, 209139, 209139A,....
  • COMPLETE KIT - Package includes: Bolt On Mounting Back Plate, 40 Series 1" Driver Pulley, 40 Series Driven Pulley, 203785 Belt, and all installation....
  • Ideal for Predator 420CC, Honda GX 340/390, Briggs and Straton, Vanguard V-Twins..
  • NO JACKSHAFT NEEDED - Includes mounting back plate with an integrated jackshaft specially designed for 40 series torque converter kit.
  • EASY TO INSTALL- BOLT ON Torque Converter kit that fits all 8HP - 18HP engines.
Check Stock

COMET INDUSTRIES 400 Series Clutch - 10 Teeth - 3/4in. Bore

  • Replaces the TC-88 series, uses 3/4in W belt for increased torque capacity.
  • Symmetric-type system for compatible with Mini-bikes, karts, etc..
  • Uses standard 26 degree 3/4in wide belts.
  • For 3 to 8 hp 2-cycle or 4-cycle engines.
Check Stock

Drive Belt For Coleman Powersports KT196 Go Kart Buggy 4 Wheelers 196cc 6.5HP

  • Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters. Fits many converter 30 series Torq-a-verter drive systems..
  • Used On Most Manco, American Sportworks and Ken-bar Karts with 5Hp-7Hp engines. Also used on the Comet Tav2 bolt on Torque-a-verter kit..
  • Compatible with torque converters with a 6" distance between the driven pulley and the driver clutch. This distance is measured from the center of each pulley. Not compatible with units with a distance of 7" center to center distance. The belt is asymmetric with a 3/4" wide top face, 18 degree angle on one side, 2.5 degree angle on the other side..
Check Stock

40 Series Go Kart Torque Converter Kit Bolt ON mounting Back Plate,1 Driver Driven Pulley Belt Mounting Hardware Fits 8-18hp Motors Predator 420cc GX 340/390 7/8

  • 40 series torque converter Kit FITS 8HP - 18HP Engines with a 1" Crankshaft, and 1/4" Keyway: Replaces COMET - 209133, 209133A, 209139, 209139A,....
  • COMPLETE KIT - Package includes: Bolt On Mounting Back Plate, 40 Series 1" Driver Pulley, 40 Series Driven Pulley, 203785 Belt, and all installation....
  • Ideal for Predator 420CC, Honda GX 340/390, Briggs and Straton, Vanguard V-Twins..
  • NO JACKSHAFT NEEDED - Includes mounting back plate with an integrated jackshaft specially designed for 40 series torque converter kit.
  • EASY TO INSTALL- BOLT ON Torque Converter kit that fits all 8HP - 18HP engines.
Check Stock

SINGER 2125 Sewing Machine Belt and Bobbin Winding Belt , Black

  • Replacement round belts for belt-driven sewing machines.
  • Pack includes motor belt and bobbin winding belt.
  • Belts fit most belt-driven sewing machines.
  • Easy to install: Just slip over wheel and into place.
Check Stock

Prolux TerraVac Deluxe Series 5 Speed Canister Vacuum Cleaner with HEPA Filtration and Electric Powerhead

  • DELUXE SERIES - TerraVac Deluxe Series includes an electric power head with geared anti slip belt, height adjustment..
  • BONUS TOOL - Includes an air driven mini turbo nozzle which eliminates pet hair and makes stair cleaning a breeze..
  • VARIABLE SPEED MOTOR - 5 cleaning powers make this the perfect answer for dusting and cleaning drapes to deep cleaning high pile carpets..
  • CONVENIENCE - 14 pound compact canister design ensures easy storage. Also features on board tool storage for duster and crevice tool!.
  • POWERFUL AND QUIET - The Prolux TerraVac produces 107 CFM at only 80 decibels so it can be used for your most demanding cleaning needs! EPA Establishment Number: 100571-UT-1.
Check Stock

KENDA Juggernaut Tire 26 x4.00 Wire Clincher DTC 60TPI Black

  • 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
Check Stock

Belt Drive No More 415 Chain for 2 Stroke 66cc 80CC Engine Motorized Bicycle

  • Package include: 1 x Drive Pulley Diameter: 39mm (11-12T sprocket equivalent) 1 x Rear Wheel Pulley Diameter: 190mm (50T sprocket equivalent) 1 x T-Belt Type: 5M-1350.
  • Smooth acceleration: The T belt has the advantage of putting down the torque of the engine much more smoothly and gradually than the chain drive counterpart. Using a belt driven motorized bike you won’t feel a sudden tug when you twist the throttle, just smooth acceleration..
  • Easy to maintain and clean: T-belts also do not accumulate dust or dirt and need far less maintenance - like lubrication - when compared to chain driven design..
  • Little noise: No more noisy metal chain. The belt driven design emits very little noise while in use..
Check Stock

Heyiarbeit 5M300 Rubber Timing Belt 5mm Pitch 20mm Width Arc Toothed Belt Synchronous Closed Loop Industrial Timing Belt for 3D Printers Black Tone

  • 【Package Included】: 10 Meters(32.8 Ft) 3D print belt with 20 teeth. Width:10mm timing belt(0.39’’).
  • 【Material】:Premium imported rubber material, which has fiberglass reinforced to be more durable and flexible..
  • 【Features】SeekLiny are professional in 3D printing accessories. The gear belt are produced by rigorous design and tested,which make it work smooth and stable.
  • mute designed & Wear-resistant with long work life..
  • 【Application】Make good performance for all DIY 3D printers,such as Creality CR10, Ender 3, Ender 5, Anet A8, E10, Anycubic, Anet series 3D printer, also suitable for most of industrial drive timing belts driven printers and so on..
  • 【5 Satrs Customer Services】Any problems about the 3d printer timing belt ,our professional team will help you solve it in the first time after you contact us..
Check Stock