Categories

Best Bench Clamp

Kreg KBC3-BAS Bench Clamp with Bench Clamp Base

  • Includes 3" (76mm) bench Clamp and bench Clamp base with bolt and knob.
  • Automaxx Auto-Adjust technology adjusts the Clamp automatically to match material thickness.
  • Clamps materials up to 3 1/2" (88mm) thick: 3" (76mm) reach.
Check Stock

Soldering Helping Hands Clamp, NOEVSBIG 4 Soldering Arms with Adjustable Vise Clip, PCB Third Hand Holder for Electronics Repair, DIY Arts Craft Hobby Soldering Aid

  • won't tip-off: This soldering helping hands base is a clamp on type to bench or tabletop, features soft rubber clamp pad providing more tighter slipping-free position, does not occupy your extra tabletop or bench space. Fits any bench up to 2.75 inches thick..
  • 4 Precision Alligator Clips：360° rotating clamps for various sized components and boards, perfect for holding circuit boards, wires, motors and more..
  • Flexible arm：Y-shaped flexible arm, light weight, pressure resistance, good stability It can be used universally, perfect for computer boards repairer/ jewelry makers/ miniature makers/ arts crafts hobbyists/welding reworker and so on..
  • Various Usage Third Hands：Use for any electronic, soldering, crafting, painting, replica, figurine and hobby work - or any precision project that requires extreme accuracy, such as model airplane repair, easy to clamp the solder and operation. Best gifts for hobbyists and DIY crafts..
  • 2022 new upgraded helping hands clamp, the end of the soldering arm adopts a sturdy metal connector, which is more closely matched with the table-clamp, not slip teeth, and lasts longer..
Check Stock

ROCKBROS Bike Repair Stand Bench Mount Home Bike Stand for Maintenance Bike Clamp Workbench Work Stands Bicycle Repair Rack for Road Mountain MTB Bikes

  • Easy to Mounted: The bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Quick release design allows you to easily assemble work bike stand..
  • Adjustable Clamp: The bench mount bike repair stand with plastic clamps are sturdy and perform well, Clamp allows for clamping of bike tubes from 30mm to 75mm. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish..
  • Easy to Use: Rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Sturdy, simple design makes servicing a bicycle a breeze..
  • Durable Materials: The bike stand for maintenance is made of iron, durable for long time. suit for commuter bike, mountain bike, road bike.(Tips: Load Capacity:44 Pounds).
  • Space Saving: You can choose to install the bicycle repair stand to the work bench or wall. Plus you can flip it around when you’re not using it so it doesn’t stick out. more convenient to keep at home. also works great as a bow vice, great value..
Check Stock

Mini Bench Vise Small Table Clamp Universal Drill Press Vise For Diy Jewelry Watch Repairing Nuclear Carving Clip Hobby Craft Repair Tool

  • Package include 1 x aluminum vice clamp, mini size and portable, handheld use. it can be installed at the edge of all kinds of desktop, maximum fixed....
  • Mini drill press vise flat clamp table bench with 4 hard adjustable plastic pins for minimizing the risk of slipping and scratching..
  • Mini vise body is made of cast aluminum,a handy miniature vise clamp down any wooden block for sanding,grinding,detail,drilling,carving,chiseling,and....
  • The mini bench vise is ideal for holding small parts in jewelry, jewelry carving, watch repairing, model making, electronics repairing, hobby,....
  • This clamp is easy to use.simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any....
Check Stock

Sourcemall Mini Bench Vise Small Table Clamp Hobby Craft Repair Tool (Clamping Range: 0-1.2inch)

  • The mini bench vise is ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench, and etc..
  • Mini Vise body is made of Aluminum which is durable, Light weigh and it's a very portable tool..
  • This clamp is easy to use. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
  • Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more..
Check Stock

Park Tool PRS-4.2-1 Bench Mount Bicycle Repair Stand with Adjustable Linkage Clamp

  • Professional-quality bench mount repair stand built for everyday shop use.
  • Securely holds any bicycle up to 100 lbs. (45kg) when stand is securely mounted with appropriate fasteners to secure bench surface.
  • Built from heavy-gauge chrome plated oversized steel tubing for a lifetime of use.
  • Clamp rotates 360 degrees and can be set from 6.5" to 16.25" (92cm to 41cm) above the bench surface.
  • Equipped with 100-3C Adjustable Linkage Clamp - adjusts to fit any frame tube up to 1-5/8" (41mm).
Check Stock

Conquer Bench Mount Bike Repair Stand Bicycle Rack

  • Rotating head adjusts clamp to any angle.
  • Clamp allows for clamping of tubes from 30mm to 75mm.
  • Durable steel construction, mounting flange has 4 holes (hardware not included).
  • Easily attached to virtually any bench, arm extends 10 in. from bench.
Check Stock

Kreg KBC3-SYS Bench Clamp System

  • Includes 3" (76mm) Bench Clamp, Clamp Plate, and mounting hardware.
  • Anodized-aluminum plate mounts flush with work surface.
  • Clamp automatically adjusts to match material thickness.
  • clamps materials up to 33/4" thick (95mm).
  • Clamp features an adjustment knob for built-in pressure control.
  • Extra-large padded clamp spreads clamping pressure evenly.
  • Ergonomic padded grips prevent hand fatigue.
  • Compatible with Kreg Clamp Trak and Clamp Vise.
Check Stock

Helping Hands Soldering Third Hand Tools - 4 Arms with Adjustable Vise Table Desk Clamp Base for Electronics Repair Assembly Painting Jewelry DIY Arts Craft Hobby

  • Perfect for Various Application-Use for any electronic, soldering, crafting, painting, replica, figurine and hobby work,even prototyping product..
  • Edge Clamp Base — The soldering helping hands base is a clamp-on type to bench or tabletop, features soft rubber clamp pad providing more tighter slipping-free position and expanded your bench, does not occupy your extra tabletop or bench space. Fits any bench up to 2.75 inches thick..
  • Four Flexible Arms – The flexible arms are made of stainless steel, strong enough to hold your project in any position. Unlike plastic pipe, the solder arms keep their position does not snap back after long projects even fully loaded. They’re in the position to fix circuit boards, jewelry, model, painting, woodwork and more..
  • 360° Rotated Alligator Clips – Alligator clamps can be rotated 360 degrees than orientated and locked into position. Each clip comes with removable rubber sleeves, This means you can keep from scratching polished surfaces of jewelry or avoid an electrical short. You can put the protective cap on or off as grip needs..
  • 45 Days Back Money Guarantee & One Year Warranty –These are good enough for use in an industrial setting, but priced right for hobbyist and DIY craftsmen..
Check Stock

Kreg KBC6 Automaxx Bench Clamp, 6 Inch

  • WOODWORKING HOLDFAST SET: Quickly clamp down your woodworking projects with the DCT | 8 Inch Woodworking Bench Accessories Workbench Holdfast 2 Pack Set.
  • For hundreds of years, bench hold fast hooks have been used to secure wood projects while cutting, carving, and sanding because of their versatility and ease of use.
  • Skip the complicated leg vise hardware and standard clamps that are difficult to adjust and use these simple workbench hold downs.
  • IDEAL FOR VARIOUS WOODWORKING JOBS: Use these work bench clamps for woodworking projects.
  • Hold downs for woodworking provides a strong, sturdy hold to allow hands-free carving, routing, sanding, planing, sawing, drilling, and finishing.
  • Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece.
  • USE WITH YOUR WORKBENCH: Works best on workbenches with a 2.5 (6.4cm) thickness.
  • Drill 3/4 inch (1.9cm) vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole.
  • We suggest filing the shank to increase hold security.
  • PERFECT SIZE FOR YOUR NEEDS: Constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength.
  • 8-inch(20.3cm) length with 3/4-inch (1.9cm) diameter shaft fits your workben....
Check Stock

Jewelry Making Bench Tool Kit with Wooden Bench Pin Ring Clamp Saw Frame Blades

  • Includes fundamental bench tools for sawing.
  • Blades can be used for a variety of woods, plastics, and metals.
  • The German-style frame adjusts to a 3" depth.
  • Bench pin features a clamp for easy mounting onto your workbench.
  • Wooden ring clamp is designed with non-marring leather jaws.
Check Stock

Mini Drill Press Vise Clamp Table Bench Vice for Jewelry Nuclear Clip On DIY Carving Tool Flat Clamp

  • WIDE APPLICATION: Ideal for holding small parts, Jewelry clamp, Watch, Hobby, Model making, Electronics, Home and Work-Bench and many other applications..
  • EASY TO USE: Handheld use, compact and handy, Used for object polishing and drilling..
  • MULTI-FUNCTION: Fits for EDM, grinding, flat patterns, text, fine carving and openwork carving.
  • GREAT FOR CRAFTS & HOBBY- This small drill press vise clamp is also great for hobbyist and crafters alike. Hold Small parts and models for fixing, such as olives, walnuts, bodhi and other small items, good fixed effects.
  • PACKAGE INCLUDED: 1x Carving Bench Clamp, 2xSupport blocks, 4xsupport columns,4x Fixed with screws.
Check Stock

Adjustable Workbench Bench Dog Screw Clamp Fits 3/4 Inch Dog Holes Stainless Steel Brass Adjustable Stop for Woodworking 19mm

  • Two specifications are available,3/4 inch (19mm) post and 20mm post,this fits perfect for your workbench dog holes..
  • Use this adjustable bench dog clamp,you can secure virtually any size or shape workpiece anywhere on your bench.
  • The low-profile design sits just a little above the surface of your bench, so will not interfere when planing or sanding thinner material..
  • Use a ratchet spanner as a handle,the moveable head travels on stainless steel threads that produce high horizontal clamping pressure with the least....
  • All metal construction,made of stainless steel and brass.
  • CNC precision machining,well made with all components..
Check Stock