Categories

Best Bench Lathe

POWERTEC 15505 White Aluminum Oxide Grinding Wheel 8-Inch by 1-Inch 5/8-Inch Arbor 120 Grit

  • INCLUDES: (1) Bench Grinder Grinding Wheel w/ vitrified bond.
  • APPLICATIONS: Medium 120 Grit grinding wheel works exceptionally well on steel, and can be used for stock removal or as a drill bit sharpening tool or part of a lathe tool sharpening system.
  • COMPATIBILITY: 8” bench grinder wheel is designed to fit and work with most pedestal and bench grinder machines.
  • FEATURES: Maximum cut rate and cool cutting action on hardened or high-speed tool steels.
  • QUALITY SPECS: Premium white aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
Check Stock

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

  • Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
  • Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
  • Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
  • Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
  • One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ...it, 8 mm Brazed Carbide RH Turning Tool, MT2 dead center, An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading, Two open end wrenches, Four hex (Allen) wrenches..
  • About Us - LittleMachineShop.com is small U.S. business and the premier source of tooling parts and accessories for bench top machinists. We have a direct relationship with the Manufacturer, and we offer full technical support for the machine plus all replacement parts, upgrades and accessories to keep it running for years of service. The 1014 lathe is manufactured by a world leader in lathes and mills and makes metalworking machines for some of the biggest tool brands in the world..
Check Stock

VEVOR Metal Lathe 8.7 x 29.5 Inch/220 x 750MM Mini Metal Lathe 750W Infinitely Variable Speed Mini Lathe Machine LED Screen for Counter Face Turning Driling

  • ...50W. Variable Speed(Rpm): 50-2250±10%. Taper in Spindle Nose: MT5. LED screen shows you the clear and accurate speed for accurate working. Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Operate either manually or with the adjustable auto feed rate..
  • 750 mm Large Swing Range: The bench top lathe brings a 3-jaw Chuck with Diameter: 4.9"/125 mm. Swing Over Bed: 8.7"/220 mm and Swing Over Cross Slide: 29.5"/750 mm offers more possibilities for large size or/and heavy workpieces. Taper in Spindle Nose: MT5. Range of Imperial Threads: 8-44 T.P.I..
  • Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. Heat hardening lead screw..
  • Supportive & Protective: Steady rest works as an end support, ensuring chatter-free operation. Follow rest is used for turning operations on long, slender workpices. Backsplash guard included..
  • Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle, and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four s....
Check Stock

Mini Vertical Slide (90 x 50 mm) for instant Milling Operation on Lathe Machine

  • TOOL POST MINI VERTICAL SLIDE -EASY & QUICK CLAMPING.
  • Quality Lathe Milling Vertical Slide Bed Size 90 mm Length x 50 mm Width Small Vertical Mi.
  • Small Vertical Milling Slide for Bench Small Lathes Can be fitted to Emco, Myford, Warco, Sieg C3 Small Lathes with little modification/ machining.
Check Stock

OPAVIOC Jewelry Polisher - Adjustable Variable Speed Bench Grinder Polishing & Buffing Machine Dental Buffer & Lathe - Includes 6 Cloth Wheels 2 Abrasive Fiber Wheels Safety Glass Polish Compound

  • ...ed anywhere without taking up too much space..
  • ✅More Than A Jewelry Polishing Machine - By adjusting the speeds, you can polish anything from chains and jewelry to gems and machine components. This buffer polisher can even be a dental lathe!.
  • ✅Compact, Portable, Powerful - Don't be fooled by the size of this bench polisher grinder machine. Despite its size, it boasts a low-noise 320W motor that churns out speeds of 1750RPM up to 8500RPM..
  • ✅With Buffing Wheel Polisher & More - This bench buffer comes bundled with six 4" cotton wheels for post-polishing jewelry, two fiber wheels for rust removal, and one polishing compound..
  • ✅Adjustable Speed: The grinder wheel polisher features different speeds, making it ideal for any type or level jewelry worker looking at buffing their pieces! The variable speed bench buffer and polishing machine for jewelry can perform different degrees of polishing by adjusting the speed. Variable speed bench buffer speeds ranging from 1750 to 10000 RPM, you can go from steady-going up through high-speed fine grinding with perfect finishes on rings or other jewelry!.
Check Stock

Crescent Nicholson 8\ Flat Fine Cut Long Angle Lathe Hand File - 07835N

  • Rectangular shape for smoothing and shaping straight surfaces in lathe work or bench filing.
  • American pattern file for non-precision material removal.
  • Single-cut teeth for finishing, sharpening, and deburring, and no teeth on edges to protect adjacent surfaces.
  • Long angle teeth for rapid filing with a smooth finish.
  • Tang for use with an optional handle (sold separately).
Check Stock

OPAVIOC Jewelry Polisher - Adjustable Variable Speed Bench Grinder Polishing & Buffing Machine Dental Buffer & Lathe - Includes 2 Cotton Buffs 2 Abrasive Fiber Wheels Safety Glass Polish Compound

  • ✅ Compact, Portable, Powerful - Don't be fooled by the size of this bench polisher grinder machine. Despite its size, it boasts a low-noise motor with a power range of 200-320 watts that churns out speeds of 1750RPM up to 8500RPM..
  • ✅More Than A Jewelry Polishing Machine - By adjusting the speeds, you can polish anything from chains and jewelry to gems and machine components. This buffer polisher can even be a dental lathe!.
  • ✅Minus The Hazard - Intuitive controls are safe for hands. The speed dial is separate from the bench grinder switch. Mounting holes and corner brackets to stabilize the jewelry buffing motor's base..
  • ✅Lightweight Table Grinder Polisher - Whether you're a professional in a busy workshop or a hobbyist making DIY projects, this polisher buffer can be used anywhere without taking up too much space..
  • ✅With Buffing Wheel Polisher & More - This bench buffer comes bundled with two 4" cotton buffs for post-polishing jewelry, two fiber wheels for rust removal, and one polishing compound..
Check Stock

Red Wing Lathes 26A 4-1/2 Base 4-1/2 Shaft 115V/110V Each

  • Model #26A: A full 1/4 HP, 1725/3450 RPM two-speed lathe for use on top of laboratory bench. Its 4 1/2” shaft height allows for easy use by the technician with hands resting on the tabletop..
  • Maintenance free standard dental, tapered shafts—each includes a right and left chuck remover for easy removal of standard dental chucks..
Check Stock

KKTECT Jewelry Rock Polishing Buffer Machine Mini Bench Lathe 110V 350W Polisher Tool Kit 10000r / min Electric Jewelry Rock Gem Grinder Mill Grinding Machine

  • 【Adjustable Speed】 -This 110V jewelry buffer polisher has a 350W powerful motor that starts up quickly and can adjust speed up to 10,000 rpm,....
  • 【Equipped with Two Wheel】 -This bench lathe jewelry polisher tool kit contains a grit wheel and a fiber wheel. The two tapered spindles attach to....
  • 【Multi-function Flex shaft】 -The flex shaft with 4mm stainless steel handle can be used with a variety of grinding discs, cutting wheel , brush....
  • 【Stable Operation】-The Bench Polisher has pre-lubricated ball bearings and a dust-proof motor housing that makes it virtually maintenance-free..
  • 【Wide Application】-This professional jewelry polisher machine is suitable for jade, agate, metal, wood, amber, beeswax engraving, polishing and....
Check Stock

Nicholson Rectangular Mill Hand File Without Handle, Single Cut, American Pattern, Bastard Cut, 6\ Length (Pack of 1) (21825N)

  • Rectangular shape for smoothing and shaping straight surfaces in lathe work or bench filing.
  • American pattern file for non-precision material removal.
  • Single-cut teeth on both sides for finishing, sharpening, and deburring.
  • No teeth on edges to protect adjacent surfaces.
  • Tang for use with an optional handle (sold separately).
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock