Categories

Best Benchmetal Bandsaw 2

FOXBC 59-1/2\ x 1/4\ x 6 TPI Bandsaw Blade for Wen 3959, Sears Craftsman, Ryobi, Delta and Skill 9\ Bandsaw - 2 Pack

  • 59 ½ inch bandsaw blade (two piece) – suitable for WEN 3959 BA3959 3959T, Sears Craftsman, Porter-Cable, B&D, Ryobi, Delta BS100, Skill 9" Bandsaw and most use 59-1/2” long band saw.
  • 59-1/2 Inch bandsaw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • 6 tpi bandsaw blade has a racer set / regular teeth profile.
Check Stock

FOXBC 62\ BandSaw Blades, 62\ x 3/8\ x 4 TPI - 2 Pack

  • 62" x 3/8" x 4 TPI BandSaw Blades for Wood - 2 Pack.
  • 62" BandSaw Blades for Craftsman, POWERTEC, Ryobi, Wen, Skil 9" Bandsaw.
Check Stock

FOXBC 70-1/2\ x 1/2\ x 3 TPI Bandsaw Blade for Sear Craftsman , Rikon 10\ Bandsaw - 2 Pack

  • 70 ½ inch bandsaw blade (two piece) – suitable for Rikon 10-305 10-3061, Sears Craftsman 21400 10" Bandsaw and most 70-1/2” long, 1/2” wide, 0. 025” thick, band saw blades.
  • 70-1/2" Bandsaw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • APPLICATION: Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • TEETH SPECS: 3 tpi blade has a racer set / regular teeth profile.
Check Stock

2 Pack Urethane Band Saw Tires - No Adhesive Needed - Fit 9 x 1/2 x .095 for Branded Bandsaws including Powermatic Jet Grizzly Craftsman etc

  • 【Urethane Bandsaw Tires 】Urethane Bandsaw Tires 9" x 1/2" x .095", They can be installed on any 9" band saw that requires a 1/2" wide and 3/32"....
  • 【9" Bandsaw Tires】9" x 1/2" Tire fit the following machines: Delta:28-150, BS100, SM400. Craftsman: 137.21409, 137.214130, 113.24458, 315.214770,....
  • 【High-Quality】: The upgraded belt is made of polyurethane material, which does not dry and rot like other types of tires compared to plastic or....
  • 【Installation And Removal】:No adhesive required. Easy to install and remove, we recommend soaking the band saw tires in hot water before....
  • 【Compatibility】 This is a flat tire. Any other brand names and part numbers mentioned are only to illustrate compatibility and suitability. - For....
Check Stock

RIKON Power Tools 10-3061 10\ Deluxe Bandsaw, Includes Fence and Two Blade Speeds

  • HIGH QUALITY MACHINE – This product includes the 10-3061 Deluxe Bandsaw and 5/16” x 70-1/2” 6TPI bandsaw blade. Great for producing smooth cuts in wood, metal, and more, this machine is perfect for any craftsman's project. Toggle between two different blade speeds to cut nearly anything..
  • MOTOR DETAILS - The increased cutting capacity and increased 1/2HP motor make this bandsaw great for small to medium sized projects. Motor: 1/2HP, 5.5Amp, 110V (60Hz), 1720RPM, Blade Speeds: 1515 or 3280 ft/min.
  • TABLE DETAILS - The tilting, 0-45° cast iron table makes for easy operation. Table Size: 13-3/4” x 12-1/2”, Table Tilt: 5 degrees left, 45 degrees right.
  • DIMENSIONS – Fence Size: 12-1/4” x 2-3/8”, Dust Port Size: 2-1/2” OD, 2-1/4” ID, Base Size: 15-7/8” W x 9-3/8” D, Overall Size: 34-1/4” H x 21” W x 16-1/4” D.
  • FEATURES – Features tool-less blade guides.
  • large blade tracking knob and viewing window.
  • and a safety paddle on/off switch. Comes with 5/16" x 6TPI regular blade and a 5-year limited warranty. RIKON Power Tools is dedicated to designing and manufacturing woodworking machinery of the highest quality that enhances the woodworking experience..
Check Stock

FOXBC 59-1/2\ x 1/8\ x 14 TPI Bandsaw Blade for Wen 3959, Sears Craftsman, B&D, Ryobi, Delta, and Skill 9\ Bandsaw - 2 Pack

  • 59 ½ inch band saw blade (two piece) – suitable for WEN 3959 BA3959 3959T, Sears Craftsman, Porter-Cable, B&D, Ryobi, Delta BS100, Skill 9" Bandsaw and most use 59-1/2” long, 1/8” wide, 0. 014” thick, band saw blades.
  • 59-1/2 inch bandsaw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • 14tpi bandsaw blade has a racer set / regular teeth profile.
Check Stock

POWERTEC BS900V 9 Inch Benchtop Bandsaw

  • Restore Quick Cuts With Your Benchtop Bandsaw.
  • Perfect Fit Blade For The Eastwood Benchtop Metal Cutting Bandsaw.
  • Cut Quickly And Easily Through Steel And Aluminum.
  • Blade Measures 52 in. Long, 1/2 in. Wide With 12-14 Teeth Per Inch.
Check Stock

650721-00 Dewalt Bandsaw Tires For Dewalt Band Saw Tires DWM120 A02807 DCS374 DW328K - 2 Pack

  • 【Bandsaw Tires】Replacement DeWalt and Porter Cable bandsaw rubber tire part is 650721-00, A02807, 5140020-79, 65072100, 514002079,725 726 736 7724 9725 PC7723,DW328. band saw tire has an outer diameter 6 " and width 1/2 ".
  • 【Compatibility】Fits Band Saw Models : 3128-BDK Type 2, 3128K Type 2, 3129 Type 2, 3129K Type 2, 725 Type 1, 725 Type 2, 725 Type 3, 726 Type 1, 726 Type 2, 726 Type 3, 736 Type 1, 7724 Type 1, 7724 Type 2, 7724 Type 3, 9725 Type 1, 9725 Type 2, 9725 Type 3, D28770 Type 1, D28770K Type 1,DCS374B Type 1, DCS374P2 Type 1, DW328 Type 3, DW328 Type 4, DW328K Type 2, DW328K Type 3, DW328K Type 4, DW329 Type 2..
  • 【Dwm120 Tire】Fits Band Saw Models: 6230 (SER 678-1001) (SER 678-1105) (SER 678-26651) (SER 678-31501) (SER 678-32001) (SER 678A) (SER 678B) (SER 678C) (SER 678D) (SER 678E) (SER 678F) (SER 678G) (SER 678H) 4-3/4 Inch Deep Cut Band Saw 6230,DWM120 Type 1, DWM120 Type 2, DWM120K Type 1, DWM120K Type 2, J-724 Type 1, J-724 Type 2, J-724 Type 3, PC7723 Type 1, PC7723 Type 2, PC7723 Type 3..
  • 【Rubber Tire】Two tires are needed on the Bandsaw,If one tire is worn, it is advisable to replace both at the same time. Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You....
Check Stock

Urethane Band Saw Tires 14 x 1 x .095 Compatible with Bandsaws Wheels Including Jet Grizzly & Powermatic for Woodworking Projects No Adhesive Needed - 2 Pack

  • Urethane Bandsaw tires 14 : These Urethane band saw tires are 14" x 1 x .095" ,2 pack,Upgraded design to fit on any desired 14″ band saw that....
  • 14 in Bandsaw tires : for following machines Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, Grizzly G0555 G0457 G0555P G0555X G0580 T21005 G1019 G1019Z, &....
  • Bandsaw tires：Longer belt life Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber....
  • Band saw tires 14" : - No need to use any adhesive. Fast and simple installation and removal, no adhesive is required for proper installation. The....
  • Money Back Guarantee ：Non-original aftermarket part ，For any reason you‘re not completely satisfied, please feel free to contact us, we will....
Check Stock

Thomegoods Urethane Band Saw Tire 9 inch x 1/2 inch x .095 inch No Adhesive Needed Fits for Delta,Craftsman,Grizzly,Black & Decker,Ryobi,ProTech and Shopfox

  • 【9 Inch Bandsaw Tires】 Band saw tires fits the following machines: Delta:28-150, BS100, SM400. Craftsman: 137.21409, 137.214130, 113.24458,....
  • 【Urethane Bandsaw Tires 】Size : 9" x 1/2" x .095". Fits certain models of Tradesman, Skil and Delta as well! Also fits for any band saw that needs....
  • 【High Quality Material】The belt is made of high-quality polyurethane material, compared with plastic or rubber tires, not dry out and crack like....
  • 【Easy to Install 】We recommend soaking the 9 inch bandsaw tire in hot water before installation, made the material softer and more elastic. When....
  • 【Please Note】Inspect belts periodically and replace when worn to maintain peak performance, Bright orange for better visibility and blade....
Check Stock

POWERTEC 13240 70-1/2\ x 1/2\ x 14 TPI Bi-Metal Band Saw Blade, for Craftsman 10\ Bandsaw (Package May Vary)

  • FUNCTION: A premium bandsaw blade designed specifically for cutting non-ferrous metal (also known as soft metal), including aluminum, copper, lead, zinc and tin.
  • CUT TYPE: 14 TPI (teeth per inch) Raker Set teeth arrangement, all teeth arranged evenly for better cutting performance.
  • SPECS: Made out of triple-tempered high speed M42 cobalt steel - 70-1/2 inches long, 1/2 inch wide (70-1/2" x 1/2" bandsaw blade) with 0.025 thickness.
  • COMPATIBLE: With all bandsaws using 70-1/2 x 1/2 inch blades.
Check Stock

POWERTEC 13330 64-1/2\ x 1/2\ x 14 TPI Bi-Metal Band Saw Blade, for 4x6 Metal Bandsaw (Package May Vary)

  • FUNCTION: A premium bandsaw blade designed specifically for cutting non-ferrous metal (also known as soft metal), including aluminum, copper, lead, zinc and tin.
  • CUT TYPE: 14 TPI (teeth per inch) Raker Set teeth arrangement, all teeth arranged evenly for better cutting performance.
  • SPECS: Made out of triple-tempered high speed M42 cobalt steel - 64-1/2 inches long, 1/2 inch wide (64-1/2 x 1/2 bandsaw blade) with 0.025 thickness.
  • COMPATIBLE: With all bandsaws using 64-1/2 x 1/2 inch blades.
Check Stock

POWERTEC 13331 64-1/2\ x 1/2\ x 14/18 TPI Bi-Metal Band Saw Blade, for 4x6 Metal Bandsaw (Package May Vary)

  • FUNCTION: A premium bandsaw blade designed specifically for cutting non-ferrous metal (also known as soft metal), including aluminum, copper, lead, zinc and tin.
  • CUT TYPE: 14/18 TPI (teeth per inch) Raker Set teeth arrangement, all teeth arranged evenly for better cutting performance.
  • SPECS: Made out of triple-tempered high speed M42 cobalt steel - 64-1/2 inches long, 1/2 inch wide (64-1/2 x 1/2 bandsaw blade) with 0.025 thickness.
  • COMPATIBLE: With all bandsaws using 64-1/2 x 1/2 inch blades.
Check Stock