Categories

Best Bending Angle Gauge

Patrick Seeker Presents Intros & FX Presentations DJ Tools

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures and Sets Angles & General Tools T-Bevel Gauge & Protractor - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade

  • Product 1: High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Product 1: Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • Product 1: V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • Product 2: ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction..
  • Product 2: SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects..
  • Product 2: DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool..
  • Product 2: WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gau....
Check Stock

The Country Living Handbook: A Back-to-Basics Guide to Living Off the Land (Handbook Series)

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Baileigh 48-Inch Magnetic Sheet Metal Press Brake (BB-4816M)

  • CREATE ENCLOSED DUCTS: Breakthrough open-ended design allows you to create shapes impossible to make with a traditional box and pan brake..
  • SCALED STROKE ANGLE CONTROL: Lets you deliver repeatable bends time after time..
  • 48-INCH BENDING LENGTH: With a maximum capacity of 16-gauge mild steel..
  • ACCOMMODATES VARIOUS THICKNESSES: Blade gap adjustment on the clamping bars..
  • CONSISTENT STRENGTH: Six-ton magnetic power across the entire beam, allows for crisp bends even in the middle of the brake..
Check Stock

50 FT Black Outdoor Extension Cord Waterproof,16/2 Flexible Cold Weather Power Cord 2 Prong, 13A 16AWG SJTW, ETL Listed HUANCHAIN

  • ...extension cord 2 prong 16 gauge. The Jacket is Flame-resistant, Waterproof Weather-Resistant(IP65), Cold-resistant (-50°C), and Corrosion-resistant suitable for indoor and outdoor..
  • High Flexible & Easy to Use: HUANCHAIN high flexible Vinyl extension cords have better bending resistance and prevent them from breaking during long-term movement, bending, and pulling. Super soft feel, easy to unfold when used. Each cord has velcro packing and easy to repack and recycle after use..
  • Hook Design & Safer: The socket has a hook design, which is easy to plug and unplug, and can be hung in a humid environment, making it safer to use. And the plug and socket end has a long durable strain relief design, which passes 20000 times great angle bending without break, extending the service life. Each Power Extension Cord 100% passes the 2500V high Voltage test before shipment keeping safety in mind..
  • What You Get: 3 years promise 50 foot extension cord outdoor. 24-hour response friendly and reliable customer service. 30-day return and 12-month replacement..
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

  • 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
  • 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
  • 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
  • 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check Stock

Digital Angle Finder, farway 2 in 1 Digital Protractor, 7Inch / 200mm Stainless Steel Digital Angle Ruler with LCD Display for Woodworking/Carpenter/Construction Tool (Battery Included)

  • ...nction of automatic shut-off after 6 min saves energy of the battery..
  • 【Easy Operation & Wide Application Angle Protractor 】Many uses, for example as miter saw protractor or for checking angle of blade on table saw or accuracy of miter saw, making angle cuts or measurements, trim / wall / corner angle measuring, bending tubing and metal sheets. Caution: This protractor for woodworking has sharp corners. Handle with necessary care.*SCRATCHES ON RULERS ARE RESULTED FROM TOUCHING WITH EACH OTHER. IT MAY APPEAR ON BRAND-NEW PRODUCT..
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock