Categories

Best Benz 38pin Breakout Box

Treedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit

  • This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
  • The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
  • This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
  • We can use it in many ways, it is highly recommended to use our breakout board.
  • Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock

ACEIRMC 3pcs ESP32 Breakout Board GPIO 1 into 2 for 38PIN Narrow Version ESP32 ESP-WROOM-32 Microcontroller Development Board

  • Only suitable for 38PIN narrow version ESP32 without mounting holes, not suitable for other versions..
  • This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative..
  • 2 TYPE CONNECTIONS， Pin Header & Screw Terminal. Just select them according to your purpose..
  • The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission..
  • The board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use..
Check Stock

S-Union Ethereum ETH ZEC Mining Power Supply 12V GPU/PSU Breakout Board + 12pcs 16AWG PCI-E 6Pin to 6+2Pin Cables 27.5Inch Length 70CM with 5 Nylon Cable Ties

  • 【Item】GPU Mining Power Supply Breakout Board and PCI-E 6Pin to 6+2Pin (Male to Male) cable.
  • 【Performance】Measured maximum can support to 1600W power supply, 12 groups of graphics card 6pin output.
  • 【Safety】The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. The line is 16 AWG wire，Able to....
  • 【Compatibility】This item is Compatible with GPU Mining Power Supply -HP 1200W/750W PSU. Such as DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12....
  • 【What You Get And Shipping】1x Power Supply Unit Breakout Board & 12x PCI-E 6Pin to 6+2Pin Cables & 5x Nylon Cable Ties. SHIPPED FROM THE U.S.....
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

DORHEA 5Pcs ESP32 Development Board GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 ESP-32 ESP-32S Expansion Board

  • ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V.
  • The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor..
  • The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board.
  • ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV.
  • This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
Check Stock

iCarsoft Auto iCarsoft M900 V2.0 Mercedes-Benz Diagnostic Scan Tool Sprinter Scanner Smart Code Reader Airbag Scan,Oil Reset etc

  • iCarsoft M900 V2.0 scanners mainly works on OBD II Mercedes. M900 V2.0 can work for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin adapter for conversion. iCarsoft Benz 38 pin socket in black is for engine only, and the red one is for multi-system.
  • iCarsoft M900 V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

KONNWEI KW360 Full System OBD2 Diagnostic Scanner for Mercedes Benz Code Reader Automotive Check Engine Light EPB ABS SRS OBDII Scan Tool Oil Throttle Position Adaption Brake Pad Reset Tool

  • EXCLUSIVE FOR Mercedes Benz: except the professional engine system OBD2 functions for all cars, KW360 also supports all systems diagnosis for Mercedes Benz including car engine light, ABS, Transmission, SAS, ESP, TPMS and other systems. Equipped with particular function like reset the oil. The KW360 can work on 16 pin Mercedes-Benz and Smart..
  • WIDE COMPATIBILITY: Accurately read and erase engine error codes on most OBD2 protocol vehicles with a 16 PIN interface (KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). (NOTE: Except for Engine system, other systems diagnosis is only compatible with Mercedes-Benz. The compatibility is up to the chassis and system, please confirm before purchase. ).
  • 10 MODES OBD2 SERVICES: KW360 OBDII code reader covers a complete OBDII/EOBD diagnostic function for car engine system. In addition to the basic function of enabling car owners to quickly read and clear DTC (Engine Trouble Code), this automatic code scanner also supports full OBD2 functions to show live data stream, On-Board monitor test(mode 6), EVAP test (mode 8), O2 sensor test and etc..
  • EXCELLENT HARDWARE: KW360 car diagnostic tool has a 2.4-inch TFT LCD display, allows you to easily read the test data. With the silicone keyboard, you can quickly operate the scanne....
Check Stock

10Pcs USB 2.0 Breakout Board, MELIFE USB to DIP Adapter 2.54mm Breakout Board 4 Pins Pinboard USB Type A Breakout Board

  • PREMIUM QUALITY MATERIAL ENSURES LONG TERM SERVICE--This USB Breakout Board is made of 100% brand new and high quality material ensures longer use.
  • USB TYPE A FEMALE BREAKOUT BOARD--Standard USB type A female socket.
  • 4 PINS USB A BREAKBOARD BOARD--With 4 pins including VBUS, D+, D- and GND.
  • IDEAL TOOL FOR USB POWER SUPPLY AND BREADBOARD DESIGN--Great for DIY USB power supply, breadboard design, etc.
Check Stock

OLLGEN Auto Car OBD2 16 Pin Connector 16 Pin Male Connector Adapter Standard 16 Pin Male Plug OBD Shell OBDII PCB Diagnostic Tool Blue

  • Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
  • The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
  • Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
  • Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
  • Package Include:Standard 16Pin Male Plug x 1.
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

uxcell 38 Pin to 16 Pin OBDII OBD2 Diagnostic Adapter Connector Cable Tool for Reading Diagnostics Info from Scanner for Mercedes-Benz

  • [Fitment] For Mercedes-Benz 38 Pin male to 16 Pin OBD2 female connector..
  • [Function] The function of the cable is connected to OBD diagnostic scanner, it can read real time engine data, such as speed, RPM, temperature, O2 sensor data, emissions, voltage, etc. That is convenient for your car driving..
  • [Feature] This is a brand new data link cable, used specifically for connecting your OBD2 scanner. Attention: this item is just an adapter, not a scanner..
  • [Easy installation] Durable and waterproof, convenient to use, plug and play..
  • [Durable Material] The cable adapter is made of plastic and metal, corrosion resistant, heat resistant and long service life..
Check Stock

Digital Music Changer Player Media CD Changer MP3 for Honda Goldwing 1800 GL1800 2001-2015

  • Decode for Bose Harman Kardon with optical interface. This optic fiber decoder box will keep your original car's optical fiber amplifier or sound sytem(for Harmon Kardon or for Bose) work..
  • It is compatiable with android radio and window CE stereo for Porsche 911(2005-2012), for Porsche boxster(2005-2012),for Porsche cayman(2004-2012)..
  • The MOST box is for Mercedes-Benz ML(2005-2011), for Mercedes-Benz GL(2005-2011), for Mercedes-Benz R(2005-2011), for Mercedes-Benz E(2009-2012), for Mercedes-Benz CLS(2009-2012), for Mercedes-Benz SLK(2009-2012)..
  • If your above compatible vehicle has the factory navigation or amplifier system (for JBL BOSE Harman Kardon, etc.) installed, you need bypass these amplifier with the fiber optic decoder..
  • Reduce installation fee,easy to install. All cables just need to be connected in front..
Check Stock

GeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header

  • Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
  • Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
  • Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
  • For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
  • Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check Stock