Categories

Best Bessey Cabinet Clamps

One (1) Pair BESSEY 72' Heavy-Duty IBeam Bar Clamps for Woodworking

  • One (1) pair of IBEAM72 clamps that provide 72" of clamping width..
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting..
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure..
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..
Check Stock

Bessey BPC-H12 1/2-Inch H Style Pipe Clamps , Red

  • H style base prevents clamps from tipping over.
  • Crank handle clears work surface when opening and closing the jaw on the clamp.
  • 4 soft jaw caps are included to prevent damaging materials being clamped.
  • Zinc plated clutch components, black oxide coated threaded spindle.
Check Stock

Bessey BPC-H12 1/2-Inch H Style Pipe Clamps, 4 Pack

  • Stabilize and elevate your workpiece with the Bessey 1/2" H-Style Pipe Clamp. Unique foot design provides dual-axis stability..
  • Long legs raise your project off the work surface so tightening is easier. H style base prevents clamps from tipping over..
  • Crank handle clears work surface when opening and closing the jaw on the clamp. 4 soft jaw caps are included to prevent damaging materials being clamped..
  • Durable powder coat finish. Zinc plated clutch components, black oxide coated threaded spindle..
Check Stock

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • 【Cabinet Clamps】Cabinet Clamps made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamp’s body and the side jaw are cast steel for long-term durability and tightness..
  • 【Dimensions】The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door ....
Check Stock

Kreg Tool Company - Drawer Slide Jig with Cabinet Hardware Jig with Concealed Hinge Jig and Two 2 Face Clamps

  • HARDWARE INSTALLATION KIT: Three easy-to-use Jigs plus two bonus Clamps in one specially-priced kit. With this hardware installation kit you can....
  • CONCEALED HINGE JIG: The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges.
  • CABINET HARDWARE JIG: The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`.
  • DRAWER SLIDE JIG: The Drawer Slide Jig takes the guesswork out of installing drawer slides.
  • CLASSIC 2-INCH FACE CLAMP: Classic 2-Inch Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other....
Check Stock

Woodworking Feather Board Inverted Square Power Tool Accessories Unique Chamfer Groove For Router Tables Band Saws Fences(Square Feather Board B Style Yellow), Cutting Tool

  • Right Angle Clamp: Align it, clamp it and fasten it the easy way with our Universal Fence cabinet clamps. Clamping a 90 degree joint couldn't get any easier with our Clamp-It assembly square..
  • Accurate 900: Assemble our angle clamps with any two pieces at 90 degrees, or even a cabinet one corner at a time. Never struggle with trying to get drawers square anymore..
  • Fence Clamp: This corner clamp is ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. Our fence clamp works with any joinery technique, from nails to hand cut dovetails..
  • Clamping Square: This woodworking square replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps. Clamp-It features a 3/8'' hole in each leg to accommodate the universal fence clamp..
  • Woodworking Clamps Set: This kit includes (2) Universal clamp, and (1) Clamp-It Square. Our Universal fence clamps and Clamp-It assembly square both are easy to use..
Check Stock

Hunter: The Complete 3rd Season (DVD) - Fred Dryer (DVD - 2011)

  • Part Number W10612022 (AP5737110) replaces 279857, 2813247, 3406130, PS8691753, W10352407, W10389561, W10612022VP, W10663495, W10725245, W10856781..
  • This seal goes onto the back of the drum to keep heat from going into the dryer cabinet. You will need about 5 clamps to hold seal in place as you stretch seal around back rim of drum (put glue on drum rim about 12-16 inch area and then work seal in that area and keep doing same way until you get all of seal on. You may have to release a couple clamps to stretch seal at very end.) You may have to use gasoline to get glue off your hands and clamps..
  • Let glue dry for an hour or so before installing drum back into dryer cabinet..
  • Dryer drum felt seal kit Include:W10612022 dryer felt seal*1,high temperature adhesive*1.
  • Buy with Confidence - SZHY-LINK parts always come with a 1 year warranty.
Check Stock

Kitchen Utensil Hooks,Wall Mounted Utensil Hangers Racks Hooks (6)

  • DETACHABLE STRUCTURE: featuring the detachable structure, there are 2 installation options. They are adjustable model and permanent model. Both of these installation options are better way than using self-adhesive. Utensil racks with sliding hooks are available under cabinet, over the door and on the wall based on your needs..
  • 2 INSTALLATION OPTIONS: ADJUSTABLE MODEL: it is easy to use the rail within clamps. No drilling, no glue, no harm to furniture. Hangs over kitchen cabinets, and adjust the screw knob. PRMANENT MODEL: As nails are included, it is easy to mount on the wall without using clamps..
  • HIGH COST PERFORMANCE - Pack of 2 kitchen rails, with 12 sliding hooks, which will bring you one step closer to a neat and tidy kitchen set-up. Maximize unused wall, door and cabinet space and turn it into an additional storage opportunity. It's really practical for daily use..
  • AVAILABLE PLACES & APPLICABLE RANGE: the utensil hangers are available for many places. They can be used in kitchen for hanging utensil like spoons, spatula, cooking utensils, kitchen gadgets. Also, it is able to be used in bathroom in order to hang up towels, robe, brush. What's more, it can be installed on the door back for keys, caps, umbrellas..
Check Stock

Dryer Felt Drum Seal W10612022 AP5737110 for Whirlpool Kenmore PS8691753 279857

  • Part Number W10612022 (AP5737110) replaces 279857, 2813247, 3406130, PS8691753, W10352407, W10389561, W10612022VP, W10663495, W10725245, W10856781..
  • This seal goes onto the back of the drum to keep heat from going into the dryer cabinet. You will need about 5 clamps to hold seal in place as you stretch seal around back rim of drum (put glue on drum rim about 12-16 inch area and then work seal in that area and keep doing same way until you get all of seal on. You may have to release a couple clamps to stretch seal at very end.) You may have to use gasoline to get glue off your hands and clamps..
  • Let glue dry for an hour or so before installing drum back into dryer cabinet..
  • Dryer drum felt seal kit Include:W10612022 dryer felt seal*1,high temperature adhesive*1.
  • Buy with Confidence - SZHY-LINK parts always come with a 1 year warranty.
Check Stock

Safco Products 5040 Small Vertical Storage Cabinet for 18" and 24" Hanging Clamps, Tropic Sand

  • Small vertical storage cabinet for 18" and 24" hanging clamps, lockable handle.
  • Holds 1,200 documents in 12 hanging clamps, sold separately on suspended track that slides on steel ball-bearing rollers.
  • Piano-hinged, steel reinforced door can be mounts left or right.
  • Heavy duty steel construction with durable powder coat finish.
  • For use with Safco Products 18" Hanging Clamps Model 50016 and 24" Model 50026 Hanging Clamps, sold separately.
Check Stock

Kreg Hardware Installation Kit with Jigs and Two 3-Inch Face Clamps

  • This Hardware Installation + Pocket-Hole Jig Kit is great for cabinetry projects, and features two best-selling hardware jigs from Kreg.
  • Concealed Hinge Jig: Accurate hinge positioning with built-in indexing tabs. Reliable drilling with bit guide and stop collar..
  • Kreg Pocket Hole Jig 310: Portable jig for creating pocket-hole joints. Simple set up and easy to use with material-thickness stops..
  • clamps materials up to 2 3/4″ thick. Helps create a flush joint during pocket-hole assembly..
  • Includes 1 Concealed Hinge Jig, 1 Cabinet Hardware Jig, 1 Cabinet Hardware Jig and 2 Classic Face Clamps.
Check Stock

36” Sure Foot Bar Clamps – Lightweight, Aluminum Carpenter Clamps for Woodworking - Pipe Clamps w/ 2-1/2' Foot Wide Base – Best Wood Clamps to Lock onto 3/4” Boards

  • Woodworking Clamps: Get all the great features of the aluminum Sure Foot pipe clamps for woodworking in a size that matches your project!.
  • Lightweight & Sturdy Design: These aluminum bar clamps for woodworking are lightweight, but stable and dependable, featuring the award-winning ergonomic Sure-Foot design..
  • Applications: These heavy duty clamps are used in a wide range of woodworking & DIY projects. Great tools for carpenters, woodworkers, hobbyists, cabinet makers, and professionals..
  • Easy To Use: Our Rockler clamps are easy to use and can clamp a wide range of projects, like building cutting boards of various sizes..
  • Available Sizes: These Rockler-exclusive design wood working clamps are perfect for any project, and are available in 24", 36", 48", and 60" lengths..
Check Stock

90 Degree Corner Clamps for Woodworking - 4PCS Angle Clips for Wood-Working | Welding | Photo Framing | Drilling | Cabinets - Pro Right Angle Clamp Set of 4

  • [Corner Clamps for Woodworking Set of 4] This pro corner clamp set can quickly and easily fix the required shapes such as square, triangle, T shape, etc. The high spring tension can hold the plates in place when they are screwed to ensure that your clamping work is done conveniently and efficiently..
  • [Easy Operation] These angle clamps for woodworking are easy to use, which can save you time and reduce workload. And These corner clips are sturdy and non-slip, which is helpful for quick installation and fixation. Whether for carpentry, welding, photo frames, or DIY use, these 90-degree right-angle clamps are very useful tools..
  • [Scope of Application] Our clamps for the woodworking sets are very suitable for drilling holes, making cabinets and photo frames, etc. In addition, these woodworking clamps can also be used to install furniture and make various small wooden boxes..
  • [One-handed Operation] The packaging accessories include 4 90-degree angle clamps. Open this cabinet clamps with one hand, and the other hand can freely clamp the workpiece..
  • [The Best Choice for DIY Lovers] The adjustable corner clamps will be the best gift for woodworkers and DIYers. You can also use this corner clip to make handmade items with your family..
Check Stock