One (1) Pair BESSEY 72' Heavy-Duty IBeam Bar Clamps for Woodworking

  • One (1) pair of IBEAM72 clamps that provide 72" of clamping width..
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting..
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure..
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied..
Check Stock

Bessey BPC-H12 1/2-Inch H Style Pipe Clamps , Red

  • H style base prevents clamps from tipping over.
  • Crank handle clears work surface when opening and closing the jaw on the clamp.
  • 4 soft jaw caps are included to prevent damaging materials being clamped.
  • Zinc plated clutch components, black oxide coated threaded spindle.
Check Stock

Bessey BPC-H12 1/2-Inch H Style Pipe Clamps, 4 Pack

  • Stabilize and elevate your workpiece with the Bessey 1/2" H-Style Pipe Clamp. Unique foot design provides dual-axis stability..
  • Long legs raise your project off the work surface so tightening is easier. H style base prevents clamps from tipping over..
  • Crank handle clears work surface when opening and closing the jaw on the clamp. 4 soft jaw caps are included to prevent damaging materials being clamped..
  • Durable powder coat finish. Zinc plated clutch components, black oxide coated threaded spindle..
Check Stock

JET 70411 Parallel Clamp Framing Kit (24' and 40')

  • EXCLUSIVE DESIGN: Provides precision and power with exact 90-degree clamping at up to 1,000 lbs. pressure..
  • ADDED COMFORT: Ergonomic SUMOGRIP handle integrated with soft grip for comfort and increased torque..
  • NON-MARRING: Composite resin jaw faces are glue-resistant in design, and ensure even clamping pressure..
  • QUICK ADJUSTMENTS: Slide-Glide trigger makes precise adjustments rapid and easy..
  • INCLUDES: Two 24" Parallel Clamps, Two 40" Parallel Clamps, Framing Block Kit, Bench Dog Set.
Check Stock

Shars 4\ x 1-5/8\ x 2-5/8\ Cast Iron V-Block Pair Ground 303-5222 S

  • Vee Capacity 1" | Dimension (W x H x L) 1-1/4 x 1-1/4 x 1-5/8".
  • 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003".Case is hardened and ground. | Clamps are included.
  • Case is hardened and ground. | Clamps are included.
Check Stock

3" Screwless Vise plus Parallels and Mounting Clamps - The Body and Jaws are Hardened to Rc 58-62 - All Sides are Flat, Square and Parallel to 0.0002", LittleMachineShop.com (3763)

  • ...those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options..
  • Thin Parallels: The thin parallels are 1/8" thick and 3" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". They are made of high grade alloy steel hardened to 52 to 58 Rc . The top and bottom of each parallel is parallel within 0.0002". The pairs are matched in height within 0.0004"..
  • Clamps: The pair of clamps is used to mount a screwless vise on your mill table. You furnish T-slot nuts and socket head cap screws (up to 3/8" diameter) of the appropriate length for your mill. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16") or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises.
  • Specifications: This high precision toolmakers screwless vise has a....
Check Stock

Jorgensen Cabinet Master 24-inch 90° Parallel Jaw Bar Clamp, 2-pack…

  • Tips: The jaws are not parallel when opened, they are preset by an inclination of +/-0.5°, when you tight up and clamp the items, the clamps will be parallel..
  • Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp..
  • Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping. Features ergonomic designed 2 component molded soft grip handle..
  • Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading..
  • This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure..
Check Stock

Rockler HD Pipe Clamp Rack – Rack Helps to Store Heavy Duty Clamps – 12 Gauge Galvanized Steel Pipe Clamps – Store Full Rack of Clamps up to 60” Long - Garage Workshop Organizers & Storage

  • Rockler HD Clamp Rack: The customary way of storing pipe clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Easily store up to 60” heavy clamps at eye level and organized into two neat rows with our HD clamp rack..
  • Perfect For Storage: Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
  • Workshop Organization: With the Rockler HD pipe brackets clamp rack, you can say goodbye to untangling clamps! This quick clamps garage tool rack features stepped slots that accept both pipe clamps and parallel clamps..
  • Secure Hold: These racks are heavy-duty and hold woodworking pipe clamps securely. The clamps will not fall off even if bumped. The installation of these rack tool holders for your garage wall are pretty easy, it just requires lag bolts..
  • High Quality: This large pipe clamp storage rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 60'' long. The footprint is very compact, saving you both wall space and floor space..
Check Stock

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock

Pony Tools 3202-HT 6 Pack 2in. Spring Clamp, Orange

  • These Pony Spring Clamps are perfect for gluing models, crafts, and other projects that require one-handed clamping.
  • The instant opening and closing feature allows you to apply and remove them from your work quickly.
  • Soft, pivoting jaw pads keep work pieces protected and allow the clamps to hold oddly-shaped objects more easily.
  • The jaws and handles are made with glass filled nylon and the heavy-duty tempered steel spring allows pressure adjustments to be made from 1 to 50 pounds of clamping force.
  • Handle contours enable comfortable use. Non-slip jaws become parallel at maximum opening capacities.
Check Stock

HANZE 2 Pcs Butterfly Frame Hinge Clamp DIY Hobby Tool for Silk Screen Printing

  • ♚ Used for fixing screen version when printing . It can be fixed on any operation table, or it can be used to Make the operation table. It is easy and convenient to operate.
  • ♛ Easy to install.Take two points on the straight line, install the butterfly clips, and Install one or several pairs in parallel as needed..
  • ♜ Durable and rustproof.These clamps also feature positive locking for perfect registration..
  • ♝ For Starters, new beginners learn how to screen printing..
  • ♞ These clamps also feature positive locking for perfect registration with 4 screws..
Check Stock

WEIZE Trailer Jack Heavy Duty Swivel Boat Trailer Jack with Dual Wheels 10 Lift 1500 lbs

  • Weize trailer jack supports, lifts and lowers your boat or recreational trailer, lift capacity: 1500 lbs, 25-1/2" to 35-1/2".
  • Bolt-on installation - Fit for Mounting Plate width 4" to 5"(no more than the length of the bolt size M10*110MM) and vertically 4" height(3 holes for you to adjust, it is 2inch, 2 - 3inch, 3 - 4inch)..
  • Corrosion-resistant zinc finish prevents rust even in the harshest environment..
  • 6” diameter x 2" wide dual wheels provide support, stability and simple maneuverability..
  • The marine jack has a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use..
Check Stock

POWERTEC 71368 Woodworking Parallel Clamps 24-Inch | Jaw Bar Clamp Spreader Tool | 2PK

  • Includes: (two) piece 24-inch parallel jaw Clamp set.
  • Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 880lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier.
  • Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool.
  • 90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement.
  • Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool.
Check Stock