Categories

Best Bevel Gear Differential Case

Traxxas 5137 Differential Oil, 50,000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Traxxas 5136 Differential Oil, 30, 000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Royal Purple 01300 Set of 3 Max Gear 75W-90 Oil 1-Quart Bottles

  • Royal Purple engineered this ultra-tough, high performance automotive hypoid gear oil to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train. Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple’s proprietary Synerlec additive technology..
  • Maximizes horsepower, Extends gear and bearing life, Reduces operating temperature, Severe service performance, Lower coefficient of friction, Superior corrosion protection.
  • Superior corosion protection, Seperates rapidly from water, Meets warranty requirements, Environmentally responsible, Formulated for limited-slip differential use.
  • Max Gear makes gears run smoother, quieter, cooler and longer without overhauls. A direct reduction of drag in the drive train has huge advantage for trucks and other 4-wheel drive vehicles: better gas mileage. Max Gear is formulated with a friction modifier additive – no additional additives are necessary..
Check Stock

Royal Purple 01300 Max-Gear Synthetic Gear Lube Oil 75W90 Pack of 6 Quarts

  • Royal Purple engineered this ultra-tough, high performance automotive hypoid gear oil to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train. Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple’s proprietary Synerlec additive technology..
  • Maximizes horsepower, Extends gear and bearing life, Reduces operating temperature, Severe service performance, Lower coefficient of friction, Superior corrosion protection.
  • Superior corosion protection, Seperates rapidly from water, Meets warranty requirements, Environmentally responsible, Formulated for limited-slip differential use.
  • Max Gear makes gears run smoother, quieter, cooler and longer without overhauls. A direct reduction of drag in the drive train has huge advantage for trucks and other 4-wheel drive vehicles: better gas mileage. Max Gear is formulated with a friction modifier additive – no additional additives are necessary..
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Boston Gear HL148Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375\ Bore, 16 Pitch, 12 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth

  • 12 teeth for use with HL148Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Case-hardened teeth for applications where hardness and strength are needed to transmit torque and motion.
Check Stock

FMS RC Crwaler 1/24 Scale FCX24 Power Wagon Butcher RTR 4WD 2.4GHz Brushed Offroad RC Car Model Vehicle Hobby Grade Remote Control Car with LED Lights Transmitter Battery USB Charger Included (Blue)

  • ...sents the details of the real car in 1949, and appears in the form of a dirt off-road truck. The attached sticker is given to the buyer to design the DIY case. T The carframe is made of high-strength nylon, the overall weight is lighter and the strength is higher. Portal axlecan increase the ground clearance of the differential tooth pack and improve the passability..
  • 【Two-speed Transmission】: The two-speed gearbox uses the CH3 of the remote control and is operated by a 9G steering gear. The low gear reduction ratio is 99, The torque output is strong, and easy for extreme climbing. The high gear reduction ratio is 24.75, Maximum speed up to 8km/h. The speed is higher than that of all similar products currently on the market..
  • 【24 Bearings】: Stainless steel ball bearings are always the favorite of players. Considering that players need to completely disassemble the whole car to upgrade the bearings in future, which is slow and laborious, FCX24 chooses to pre-install the whole car with a total of 24 bearings, which does not need to be disassembled and re-upgraded, saving time and effort, and addresses the concern once for all..
  • 【More Fun】: RTR version, ready to play. The FCX24 rc crawler is equipped with a straight axle by default, but the pla....
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

REPLACEMENTKITS.COM - Brand Fits Polaris Rear Differential Gear Case Seal Replaces 3610146 -

  • Fits 2009 -2016 Ranger. RZR 800, RZR 800 S & the RZR 800 4.
  • Rear Differential Gear Case/ Axle Seal is an exact cross and replaces the Polaris OEM P/N 3610146, 026HH115, 3610117, 3610159.
Check Stock

GoolRC RC Car Metal Differential, Main Transmission, 38T Gear and 17T Gear Combo Set for 1/18 Scale WLtoys A959 A969 A979 Remote Control Car

  • This metallic set is durable, composed of 1 main transmission, 2 differentials, 38T gear and 17T gear..
  • This differential gear and main transmission set is compatible with WLtoys A959 A969 A979 RC car..
  • The main transmission can provide enough driving force when the car goes up the slope..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock