2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Lancer Tactical LT-19 Gen 2 M4 Carbine AEG Airsoft Rifle (Tan High FPS GS Style)

  • MATERIALS – Gen II Version Upgraded With A Nylon Reinforced Body: Durable Metal Trigger And Controls.
  • BARREL - Polished 6.03 Mm Tight Bore Inner Barrel For Improved Air Seal And Accuracy Full Metal Version 2 Rear-wired.
  • GEAR - Gearbox Provides Easy Battery Access And Version 2 Gearbox Features Metal Gears Along With The Cylinder Teeth.
  • Enlarged trigger guard accommodates users wearing gloves One-piece outer barrel provides stability and zero wobble Upgraded gearbox with 18:1 steel gear set and high-speed motor.
  • BATTERY – Recommded Simple battery (9. 6 V Nunchuck)-Not Included.
  • MAGAZINE- Durable Full Metal High Capacity 300 Rounds with Nylon Polymer Winding Wheel (15 Times on First Use/ Continue Winding While Shooting).
Check Stock

Speed Read F1: The Technology, Rules, History and Concepts Key to the Sport

  • ✔KEYCHAIN: The gear actually moves as a 6 speed reverse gear shifter. This little gearshift keyring is able to shift just like a real car gearbox..
  • ✔METAL KEY CHAIN: Metal key chain can help to learn how to drive a stick shift and this is a nice little gadget to remind you succeed..
  • ✔HIGH QUALITY: This shifter keychain is made of high quality polished metal, compact design with light weight and fine craftsmanship..
  • ✔COOL GADGET: Cool gadget to express your personality, ideal companion of your car keys, bags, cellphones or other wonderful objects..
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set (2 or more gears) should be replaced together for smoothly drive..
Check Stock

DC 12V Speed Reduction Gear Motor Electric High Torque Gearbox Motor Micro Multiple Models Reducer Replacement Motor (30RPM)

  • 【Widely Used】Gear motors can be found in many different applications, and are probably used in smart toy car, robot, printer,etc.
  • 【Multiple Speed Options】There are five reduction gear motors of different speed and you can choose the one you need,Speed: 3.5RPM, 15RPM, 30RPM, 70RPM.
  • 【High Torque】 Gear motors are primarily used to reduce speed in a series of gears, which in turn creates more torque.
  • 【Full Metal Gears】The metal gear in the gear box has a strong carrying capacity, high temperature resistance, wear resistance, ruggedness and other characteristics effectively protect the main body of the worm gearbox motor.
  • 【Specifications】Voltage: 12V DC--RPM: 3.5RPM/15RPM/30RPM/70RPM--Diameter: 37mm--Gearbox reduction ratio: 1:30 --- 1: 360--Starting voltage is 3.5V.
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set (2 or more gears) should be replaced together for smoothly drive..
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set (2 or more gears) should be replaced together for smoothly drive..
Check Stock